ATEN 2X-021G Quick start guide

ATEN
Brand
ATEN
Model
2X-021G
Category
Rack accessories
Type
Quick start guide
2. Remove the bottom and side screw from each KE Series unit.
KE Series Dual Rack Mount Kit - 2X-021G
Installation:
Package Contents:
1. Remove four screws from the KE Series units and then use the same screws to secure the units
together with the link bracket.
This dual rack mounting kit installs two KE Series units
side by side in 1U of server rack space.
1 x link bracket
1 x right mounting bracket
1 x left mounting bracket
4 x Phillips hex screws
4 x flat screws
link bracket
remove screws
remove screws
Installation Guide
MISC00000270 03/2021 V3.0
KE Series Dual Rack Mount Kit - 2X-021G
4. Screw the mounting brackets to the rack.
3. Use the screws from step 2 to install the left and right mounting brackets.
right
mounting
bracket
left
mounting
bracket
Phillips
hex screw
Phillips
hex screw
Installation Guide
  • Page 1 1
  • Page 2 2

ATEN 2X-021G Quick start guide

ATEN
Brand
ATEN
Model
2X-021G
Category
Rack accessories
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents