Inserts dowels (C) into parts (1,2,7,8,9) and screw cam bolts (B) into parts (2,3,4,9) as shown
in the diagram.
Inserts dowels (C) into parts (5,10,11) as shown in the diagram.
Attach parts (7,8) to part (9) as shown in the diagram. Carefully place cam locks (A) into
parts (7,8) and tighten using a screwdriver.
Secure supports (12) to bottom panel (10) using bolts (D) as shown in the diagram.
Secure dividers (5,6,11) to bottom panel (10) using bolts (D) as shown in the diagram.
Slide back panel (13) into place carefully.
Attach parts (1,3,4) to part (2) as shown in the diagram. Carefully place cam locks (A) into
part (2) and tighten using a screwdriver.
Place top assembly onto lower frame as shown in the diagram. Insert cam locks (A) as
shown and tighten using a screwdriver.
Insert wedges (E) to the back panel and secure using screws (F) as shown in the diagram.
Cover cam locks using stickers (H) as desired.
Place fabric bins (14) and cushion (15) into place as shown.
/
