Page is loading ...
DDVC/08 VR DDC/08 VR
Audio and video
entry panel
DDVC/08 VR - DDC/08 VR
PROGRAMMING MANUAL
EN
English
FB00866-EN
Page 2 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
General precautions
• Read the instructions carefully before beginning the installation and carry out the actions as specified by the manufacturer.
• The installation, programming, commissioning and maintenance of the product must only be carried out by qualified technicians,
properly trained in compliance with the regulations in force, including health and safety measures and the disposal of packaging.
• The installer must ensure that the information for the user, where there is any, is provided and delivered.
• Before carrying out any cleaning or maintenance operation, disconnect the devices from the power supply.
• The equipment must only be used for the purpose for which it was expressly designed.
• The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.
Decommissioning and disposal. Do not dispose of the packaging material and the device at the end of its life cycle in the
environment, but dispose of them in compliance with the laws in eect in the country in which the product is being used. The
recyclable components are marked with a symbol and the material's ID marker.
THESE INSTRUCTIONS MUST BE ATTACHED TO THE DEVICE, the data and information contained are to be considered as subject
to change at any time and without the need for any advance warning.
Programming menu structure
Language Text
Voice Messages
General Settings
Name
Product Version
Display
Keypad
Audio
Timer set
Password
Contrast
Keypad Tones
Door Opener
Backlight On
Busy Tone
Door Open Tone
Voice Messages
Page 9
0-90 (36)
2-15 (5)
1-10 seconds (1 second)
4-8 figures (1234)
By Touch-Always-
By Command
On
O
Italiano-English-Deutsch
Français-Español-Português
Page 3 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Date
Date and Time
Reset
On
O
Time
Show time
DST
Codes
Assign
Calls
Groups
Assign
Call Code
Keypad Code
Group Name
RFID Code
Status
Users
Delete
Groups Enabling
Users Enabling
Identify
Create
Group Codes
RFID Code
Change
Delete
User Codes
Page 13
Page 15
Page 17
Enabled
Disabled
All
Single User
Groups 1÷100
(20 enabled)
All-Keypad Code
RFID Code
All
Nobody
Names & Calls
A
A
D
V
M2
M1
1
ON 24
3
ABC
A Z Z A
A
B
A
A
D
V
M2
M1
1
ON 24
3
ABC
A Z Z A
1
B
A
A
D
V
M2
M1
1
ON 24
3
ABC
A Z Z A
C
1
4
B
C
VA/08
VA/08
VA/08
VA/08
L
L
DDVC/08 VR DDC/08 VR
Page 4 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Warning lights A
Red - Call in progress Yellow - Conversation in progress
Green - Door open Blue - System busy
Terminal Board B1
+Power supply
14-18 VDC
–
AAudio
A
+
Data LineD
–
+
Video SignalV
–
Terminal Board BB
Solenoid lock
12 V - 1 A max
–
Door lock release button (NA)
Door contact input (NC)
–Ground
System output (active to
ground)
–Ground
Functions
Adjustments C1
Speaker audio
Microphone audio
CN4 Connector CB
For future uses
Mini USB CC
Programming connector
Dip-switch C4
Adjustment of distance between power supply and entry panel.
Dip-1-2 Data line setup
OFF OFF L<500 m
ON
ON 500<L<1000
m
Dip-3 Video line setup
OFF L<150 m
ON 150<L<250 m
M4M1
M2M5 M3
+12V
+D – +V1– +V2 –
A A +D – +V3– +V4 –
A A
A
A
D
V
M2
M1
VLS/101
1
2
1
2
M4M1
M2M5 M3
+12V
+D – +V1– +V2 –
A A +D – +V3– +V4 –
A A
M2
M1
A
A
D
VLS/101
1
2
1
2
D
DDVC/08 VR
DDC/08 VR
Page 5 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Connection examples D
A
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Nome
Display
Versione
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Name
Display
Product Version
Language
General Settings
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Name
Bildschirm
Ausführung
Sprache
Konfiguration
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Nom
Afficheur
Version
Langue
Configuration
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Nombre
Pantalla
Versión
Idioma
Configuración
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Nome
Ecrã
Versão
Idioma
Configuração
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Display
Audio
Nome
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Display
Audio
Nome
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Display
Audio
Nome
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
_
Password
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Display
Audio
Nome
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Display
Audio
Nome
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Display
Audio
Nome
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
_
Password
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Display
Audio
Nome
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Display
Audio
Nome
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Display
Audio
Nome
Lingua
Configurazione
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
_
Password
B C D
Page 6 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Technical features
Type
DDVC/08 VR
DDC/08 VR
DDVC/08 VR IP65 - DDVC/08 VR US
Power supply [V DC]
14-18
Current consumption [mA]
220
Consumption in stand-by mode [mA] 370 150
Dimensions of wall-mounted version [mm]
140x380x47
Dimensions of recessed version [mm]
140x380x2
Storage temperature [°C]
-25 /+70
Operating temperature [°C]
-30 /+50
-15 /+50
IP Rating
IP 54
IP 65
DDSI recessed box IP rating
IP 54
Video standard
PAL/NTSC
Resolution [pixel]
680x512
Minimum lighting [LUX]
1
Use of keys during programming
This part of the Programming Manual is useful for understanding how to use the function
keys.
The buttons available for navigating in each menu are as follows
Scroll arrows Enter selected window Back to previous window
Navigation examples
Function selection screens
ESC
ESC ESC
With the keys you can scroll (in turn) through the available functions; the
function selected is highlighted white on black.
Error messages
Press the [ESC] key to exit the error screens. It is also possible to exit by being
timed out (10 seconds).
ESC
Name
Display
Product Version
Language
General Settings
ERROR!
Password
ERROR!
Keypad Code
Assign Calls
Codes
Names & Calls
General Settings
Main Menu
✓
Page 7 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Setting values
4567_
ESC
(2-15)
5
ESC
ESC ESC
DIGITHA_
ESC
ESC
(2-15)
5
ESC
✓
ESC
✓
On all screens where alphanumeric characters have to be entered, the first
screen displays the current value with the cursor placed on the last character.
Using the key you can delete the values entered by placing the cursor on
the last character.
To confirm press . To exit press [ESC] or wait for the time to run out (10
seconds).
The values required can be increased, decreased or selected on the screen
with the keys.
To confirm press . To exit press [ESC] or wait for the time to run out (10
seconds).
The last selection made is marked with a tick (✓) on the left of one of the
possible choices.
Once the selection has been made, the setting chosen will be marked with a
tick (✓) in the top right of the screen.
Confirmation to carry out a function
From these screens you can continue/confirm with while it is possible to
exit by pressing [ESC].
Programming with PCS/XIP
If the entry panel has been programmed using PCS/XIP software, for safety reasons only some param-
eters can be changed.
In all other cases the symbol shown on the left will appear on the display.
ESC
Call Code
Keypad
to confirm
Press
Reset
to confirm
Press
Delete
Name
By command
✓ Always
By touch
Backlight On
Keypad
YYYY/MM/DD
YYYY/DD/MM
MM/DD/YYYY
Date format
✓DD/MM/YYYY
C
B
A
A Z Z A
Page 8 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Procedure to Enter/Exit programming
After the first switch-on, the menu to choose the desired lan-
guage for the entry panel will appear.
ESC
ESC
ESC
ESC
ESC
ESC ESC
To enter programming press the key (A) fol-
lowed by the protective password (B) (stored lo-
cally on the entry panel), which by default is 1234,
followed by the first function key on the left (C).
Any combination of 4 to 8 numerical characters is
permitted as the password.
These two menus can ONLY be
used with the entry panel connected
to the power supply used to create the
system, otherwise the related "warning"
window will appear, which can be exited
from by pressing the [ESC] key, or auto-
matically after a few seconds.
y If no manoeuvre is made, you exit from the
programming menu automatically after 30
minutes, and go back to the initial screen.
ABC
Assign Calls
Codes
Names & calls
General Settings
Main Menu
Assign Calls
Codes
Names & calls
General Settings
Main Menu
Assign Calls
Codes
Names & calls
General Settings
Main Menu
exit
to confirm
Press
Main Menu
Assign Calls
Codes
Names & calls
General Settings
Main Menu
Français
✓ Italiano
Español
English
Text
✓Voice Messages
Text
Language
WELCOME
ESC
Page 9 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
General Settings
The parameters listed below can be set in the [General Settings] menu.
Language
Use this menu to choose the language you want
the entry panel to operate in.
Product Version
Via this menu you can check the entry panel version and its serial number.
Name
Use the alphanumeric keypad to enter the name (max. of 12 alphanumeric
characters) that will be shown on the entry panel’s start-up screen.
Display
Using this menu you can set the display contrast
and whether backlighting of the display should be
turned on (as well as the keypad lighting) as soon
as the keypad is actually in use [By Touch],[Al-
ways] or [By command], when its activation
should be commanded by a system input (set only
by tool).
Name
Display
Product Version
Language
General Settings
ESC
Name
Display
Product Version
Language
General Settings
ESC
DIGITHA_
Name
ESC
Voice Messages
Text
Language
Voice Messages
Text
Language
ESC
Name
Display
Product Version
Language
General Settings
ESC
0.00.0022
SN 40ABCD
1.06
Product Version
ESC
Deutsch
English
Português
✓ Italiano
Text
ESC
Deutsch
English
Português
✓ Italiano
Voice Messages
ESC
Name
Display
Product Version
Language
General Settings
ESC
Backlight On
Contrast
Display
ESC
36
(0-90)
Contrast
ESC
Backlight On
Contrast
Display
ESC
By command
✓ Always
By touch
Backlight On
ESC
Page 10 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
ESC
(2-15)
5
ESC
ESC
Keypad
Using this menu you can set the sensitivity of the
keypad keys to the touch.
The degree of sensitivity can be increased or re-
duced using the arrows.
A value of 2 means that the keypad is very sen-
sitive; a value of 15 means that the keypad is not
very sensitive at all.
Once the value has been selected, press to
confirm and wait for the instructions on the screen
shown on the left, then continue with program-
ming.
Audio
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
Using this menu you can choose whether or not to
activate a beep in the event of:
- pressing keys [Keypad Tones]
- system busy [Busy Tone],
- activation of solenoid lock [Door Open Tone].
It is also possible to choose whether or not to acti-
vate voice messages.
The messages available are:
- “System busy”;
- “Door Open”,
- “Call forwarded”.
Timer set
Using the [Timer set] menu, you can set the dura-
tion of the door open command.
Display
Keypad
Name
Product Version
General Settings
Keypad
and
Hold on
the buttons
Release
Keypad
Door Open Tone
Voice Messages
Busy Tone
Keypad Tones
Audio
O
✓ On
Busy Tone
Keypad
Audio
Display
Name
General Settings
Door Open Tone
Voice Messages
Busy Tone
Keypad Tones
Audio
O
✓ On
Keypad Tones
Door Open Tone
Voice Messages
Busy Tone
Keypad Tones
Audio
O
✓ On
Door Open Tone
Door Open Tone
Voice Messages
Busy Tone
Keypad Tones
Audio
O
✓ On
Voice Messages
Audio
Timer set
Keypad
Display
General Settings
Door Opener
Timer set
Door Opener
Page 11 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Password
Using this menu you can change the protective password (stored locally on the entry panel), which by default is 1234. The password
can be made up of 4 to 8 numerical characters.
ESC
If an incorrect password is entered, the related error window will appear, which can be
exited from by pressing the [ESC] key or by being timed out (10 seconds).
Date and Time
Date
Using this menu you can set the date and desired format.
Once in the [Date set] menu, set the year (in 4 figures) and press to confirm, then go on to set the month and the day (in 2
figures), pressing each time to confirm.
If a value that is not permitted is set (e.g. 16 in the [Month] field), the data will not be accepted.
Timer set
Password
Audio
Display
General Settings
ESC
_
New
Password
ESC
_
Confirm
Password
ESC
_
Present
Password
ESC
ERROR!
Password
Password
Date and Time
Timer set
Audio
General Settings
ESC Month:
Day:
Year: ______
16/02/2010
Date set
ESC
Show time
DST
Time
Date
Date and Time
ESC
Date format
Date
ESC
Date set
Date format
Date
ESC
Date set
YYYY/MM/DD
YYYY/DD/MM
MM/DD/YYYY
Date format
ESC
✓ DD/MM/YYYY
Month: 12
Day: 16
Year: 2009
16/02/2010
Date set
ESC
✓
YYYY/MM/DD
YYYY/DD/MM
✓ MM/DD/YYYY
Date format
ESC
DD/MM/YYYY
✓
✓
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Lingua
Attendere
Program. impianto
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Lingua
Attendere
Program. impianto
ESC
Page 12 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Time
Using this menu you can set the time and desired format.
Once in the [Time] menu, set the hour (in 2 figures) and press to confirm; then go on to set the minutes and seconds (in 2
figures), pressing each time to confirm.
If a value that is not permitted is set (e.g. 67 in the seconds field), the data will not be accepted.
Show time
Using this menu you can choose whether or not to enable the display of the time and date on the first screen.
DST
Using this menu you can choose whether or not to enable DST.
Reset
Using this menu you can revert to the factory settings for all the parameters that can be set for the entry panel.
Show time
DST
Time
Date
Date and Time
ESC
Time Format
Time set
Time
ESC
Time format
Time set
Time
ESC
✓ 12H
24H
Time Format
ESC
Minutes: ______
Seconds: ______
Hours: ______
14:34:09
Time set
ESC
12H
✓ 24H
Time Format
ESC
✓
Minutes: 34
Seconds: 09
Hours: 14
14:34:09
Time set
ESC
✓
Show time
DST
Time
Date
Date and Time
ESC
✓ O
On
Show time
ESC
O
✓ On
Show time
ESC
Show time
DST
Time
Date
Date and Time
ESC
✓ O
On
DST
ESC
Password
Reset
Timer set
Audio
General Settings
ESC
to confirm
Press
Reset
ESC
In progress...
Restart
Reset
ESC
✓
Page 13 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Names & Calls
Groups
Using the [Groups] menu it is possible to:
- set the call code that activates the call to the internal receiver that corresponds to the [Group]; it can be a maximum of 8 numerical
characters long.
- set the name associated with the group, which will be the one used to be displayed during the groups/users search; it can be a
maximum of 12 alphanumeric characters long.
- enable or not the displaying of this group during the groups/users search stage. This function is useful for ensuring that unused
groups are not displayed during searches.
If an incorrect value is entered, the related error window will appear, which can be exited from by pressing
the [ESC] key or, by being timed out (10 seconds).
Users
The [Users] menu lets you create, change and
delete users.
First the group to which the user belongs must be
selected.
Create
Using this menu you can associate the name and surname with which each
user will be identified.
Each group can have a maximum of 5 users.
Use the key to move the cursor between the lines of the window; using the
key delete the values entered by placing the cursor on the last character
and entering the [name] and [surname] desired.
Should this limit have already been reached, when you try to create more of them, the window shown
on the left will appear.
Groups Enabling
Users
Groups
Names & calls
ESC
Users Enabling
Disabled
✓ Enabled
Status
ESC
4567_
Call Code
ESC
Zampolini_
Group Name
ESC
Enabled
Zampolini
4567
Group
ESC
Group 3
Group 4
Group 2
Group 1
Select Group
ESC
Existing
Code
Call Code
ESC
Delete
Change
Create
Users
ESC
Groups Enabling
Users
Groups
Names & Calls
ESC
Users Enabling Group 3
Group 4
Group 2
Group 1
Select Group
ESC
Delete
Change
Create
Users
ESC
NAME
<group name 001>
<group surname 001>
SURNAME
User Name
ESC
Full
Group
Users
ESC
Page 14 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Change
Using this menu you can change the name and
surname with which each user will be identified.
Selecting the desired user.
Use the key to move the cursor between the lines
of the window; using the key delete the values
entered by placing the cursor on the last character
and entering the [name] and [surname] desired.
If users have not been created and you try to change them, the window shown on the left will appear.
Delete
Using this menu you can delete a [Single User] or [All] users belonging to the selected group. In the event of a single deletion it is
necessary to select to user to be deleted.
In all cases, for the sake of safety, confirmation is required before the operation is carried out.
If users have not been created and you try to delete them, the window shown on the left will appear.
Groups Enabling
Using this menu you can quickly update the list of groups that you want to be
displayed during the groups/users search.
The groups enabled for being displayed are marked with a tick (✓).
To enable/disable a group use the key.
Delete
Change
Create
Users
ESC NAME
Mario_
Rossi
SURNAME
User Name
ESC
Mario Rossi
Select User
ESC
Empty
Group
Select User
ESC
Delete
Change
Create
Users
ESC
ESC
Single User
All
Delete
ESC
Single User
All
Delete
Press
Delete
ESC
to confirm
Press
Delete
ESC
to confirm
<group name 1>
Select User
ESC
Empty
Group
Select User
ESC
Groups Enabling
Users Enabling
Users
Groups
Names & Calls
ESC
✓ Group 3
✓ Group 4
✓ Group 2
✓ Group 1
Select Group
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Lingua
Attendere
Program. impianto
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Lingua
Attendere
Program. impianto
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Lingua
Attendere
Program. impianto
ESC
A
beep
B
Page 15 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Users Enabling
Using this menu you can enable whether or not the names of users are dis-
played during the groups/users search.
The selection made is marked with a tick (✓).
Assigning call code
y Manual programming is only possible in the case of a single entry panel (DDVC/08 VR-DDC/08 VR).
Where a DC/08-DVC/08 is present, manual system programming must be started from the DDVC/08 VR-DDC/08 VR plate
as described below. In this event it is not necessary to go into programming mode from the VA/08 power supply; the other
DC/08-DVC/08s are programmed as shown in the relative manuals.
Using this menu it is possible to assign to each internal receiver the corre-
sponding call code.
To go into programming press the key.
Once in programming the system will start autorecognition.
When it finishes, the entry panel’s LEDs will turn on as shown in the figure
on the left.
To continue programming press the key.
Once the screen shown on the left is displayed, follow the procedure described
below in order to be able to assign the call code to the internal receiver.
Lift the handset (if present) of the receiver that you want to programme and
then press the door lock release and Aux 2 buttons A.
To assign the call code, select the desired group using the arrows and
confirm by pressing .
A beep will confirm that programming has taken place B.
Groups Enabling
Users Enabling
Users
Groups
Names & Calls
ESC
Nobody
✓ All
Users Enabling
ESC
Assign Calls
Codes
Names & Calls
General Settings
Main Menu
ESC
Hold on
Assign Calls
ESC
to
continue
Press
Assign Calls
ESC
in programming
mode
Set the receiver
Assign Calls
ESC
Antonio Bianchi
Luca Viola
Gianni Verdi
Mario Rossi
Select Group
ESC
C
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Lingua
Attendere
Program. impianto
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Lingua
Attendere
Program. impianto
ESC
3
8
4
6
9
7
5
2
1
100 °
82 °
54 °
72 °
1÷9
0
D
F
E
Page 16 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
End the communication (by replacing the handset if necessary C) and contin-
ue, repeating the procedure just described for all the other receivers.
y If the window and configuration of LEDs shown on the left should
appear, programming cannot be carried out from this entry panel: to
make the operation possible press .
You will then be taken back to the configuration shown on the left and will
be able to proceed with assigning the calls as shown on the previous page.
Programming entry panel surveillance camera
During system programming, with the monitor turned o, press the “Self-con-
nection ” key D to adjust the “visual field” of the surveillance camera.
From the default settings it is possible to scroll through the following ones E
and press the AUX1 key or go back to the previous settings with the AUX2
key F: the setting is automatically saved.
to this Entry Panel
press
the Calls assignment
To transfer
Assign Calls
ESC
in programming
mode
Set the receiver
Assign Calls
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Lingua
Attendere
Program. impianto
ESC
Page 17 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Codes
The [Codes] menu lets you assign, delete or iden-
tify a code for each device available (keypad, RFID
code).
Assign
Using this menu you can associate a single Key-
pad Code and an RFID Code, to each user of each
group.
The keypad codes can be 4-8 characters long.
If codes that already exist or codes that are not
valid are assigned, the relative error window will
appear.
An already assigned code cannot be changed with-
out first being deleted with the relevant function.
Identify
Delete
Assign
Codes
ESC
Assign Calls
Names & Calls
General Settings
Main Menu
ESC
Codes
RFID Code
Keypad Code
Assign
ESC
card close to the
reader
the proximity
Bring
RFID Code
ESC
Enabled
RFID Code
ESC
Identify
Delete
Assign
Codes
ESC
<name surname 1>
Select User
ESC
RFID Code
Keypad Code
Assign
ESC
_
Keypad Code
ESC
4567
Keypad Code
ESC
Group 3
Group 4
Group 2
Group 1
Select Group
ESC
ERROR!
RFID Code
ESC
WXYZ
PQRS TUV
JKL MNO
ABC DEF
GHI
Lingua
Attendere
Program. impianto
ESC
Page 18 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Delete
Using this menu it is possible to delete:
- all the codes of the users belonging to a particular group,
- all the codes assigned to a particular user
- a particular code assigned for that user (keypad code, RFID code).
In all cases, for the sake of safety, confirmation is required before the operation is carried out.
Identify
Delete
Assign
Codes
ESC User Codes
Group Codes
Delete
ESC
RFID Code
Keypad Code
All
Delete
ESC
RFID Code
Keypad Code
All
Delete
ESC
User Codes
Group Codes
Delete
ESC
RFID Code
Keypad Code
All
Delete
ESC
to confirm
<group name 004>
Press
Select Group
ESC
to confirm
<group name 004>
Press
Delete
ESC
Group 3
Group 4
Group 2
Group 1
Select Group
ESC
<name surname 1>
Select User
ESC
Page 19 - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Identify
Using this menu it is possible to check which user a badge with unknown owner belongs to. If this is identified the option to delete
the code is still suggested.
In all cases, for the sake of safety, confirmation is required before the operation is carried out.
If the badge or proximity card is not recognised, or has not been stored in the entry panel, the screen
shown on the left will appear.
Unknown
<group name 004>
Code
Identify
ESC
Identify
Delete
Assign
Codes
ESC
RFID Code
Identify
ESC Delete?
<group name 004>
<name surname>
RFID Code
ESC
card close to the
reader
the proximity
Bring
RFID Code
ESC
to confirm
<group name 004>
Press
Delete
ESC
CAME S.p.A.
Via Martiri Della Libertà, 15
31030 Dosson di Casier - Treviso - Italy
tel. (+39) 0422 4940 - fax. (+39) 0422 4941
English - Manual FB00866-EN - ver. 1 - 09/2017- © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
/