Oxford Garden Argento Loveseat Assembly Instructions

  • Hello, I'm your chat assistant. I've reviewed the assembly instructions for the ARGENTO Loveseat. This document details the necessary steps for assembling your new loveseat, including the required components, hardware, and tools. I'm ready to answer any questions you may have about the assembly process or any other details mentioned in the document.
  • What are the components needed for assembly?
    What hardware is included?
    What tool is required for tightening the bolts?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
ARGENTO LOVESEAT
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
Seat Assembly
Leg Assembly
2
25 mm Short Bolt
Quantity: 2
A
35 mm Long Bolt
Quantity: 3
B
45 mm Long Bolt
Quantity: 1
C
Flat Washer
Quantity: 6
D
B
Allen Wrench
Quantity: 1
E
Ver. 06.30.20
STEP 2
Place washer on bolts, , & . Next, hand tighten
bolts into the pre drilled holes as shown. Repeat for all
bolts.
INSTRUCTIONS
STEP 1
Line up Loveseat Seat Assembly onto Leg Assembly
to the pre drilled holes on the seat assembly as
shown.
Note: Curved part of leg assembly lines up with the back
of the chair.
Ver. 2020.01.28
Step 2 Detail
Underside view
STEP 4
Turn upright and enjoy!
Step 3
Tighten all four bolts with the allen wrench provided.
D
2
C
A
2
ABC
D
2
A
D
B
B
C
A
B
/