2. FläktGroup
  3. EULZ-25 Telpher beam

FläktGroup EULZ-25 Telpher beam Installation guide

  • Hello! I've analyzed the installation instructions for the Fläkt Woods Telpher beam EULZ-25. This document provides details on how to extend the telescopic beam, fit the lifting eye, and be mindful of the maximum extension and load. I'm here to help with any questions you may have about this product!
  • What is the maximum extension of the telpher beam?
    What is the maximum load at full extension?
    Is it always possible to align the telpher directly above the motor?
Fläkt Woods 3215 GB 03.01 1 Specifications are subject to alteration without notice
EU Air Handling Unit INSTALLATION
Telpher beam EULZ-25, size 22–50
Extend the telescopic beam and check that the lifting eye
slides freely on the telescoping beam.
Release the motor.
Fit the lifting eye with a block and tackle capable of
supporting the weight of the motor.
In certain cases the telpher cannot be aligned directly
above the motor.
Maximum extension 600 mm. A stop screw in the
telpher beam will ensure this.
Maximum load at full extension 350 kg.
32 32
Telpher beam
Fixing plate
Sliding plate
Lifting eye
Telescopic beam
Max 600
/