YoLink YS3604-UC User manual

Brand: YoLink

Model: YS3604-UC

Type: User manual

YoLink YS3604-UC, a smart remote control device, offers flexible customization and control options for your smart home devices. With four programmable buttons, you can assign various actions, including scene control, alarm activation/deactivation, and device triggering. Easily manage your smart home devices, whether you're home or away, using the intuitive YoLink app. Enjoy convenient control and automation with YoLink YS3604-UC.

YoLink Fob

(FlexFob & AlarmFob)

YS3604-UC

Set-up & User Guide

Rev 1.0

Sincerely,

Queenie, Clair, James, Eric

Customer Support Team

Thank you for purchasing YoLink products and for entrus ng us with your smart home needs!

Your 100% sa sfac on is our goal. If you experience any problems with se ng up your new

YoLink Fob (FlexFob or AlarmFob), please give us a chance to assist you, before returning

your purchase.

We at Customer Support are here for you.If you need any assistance installing, se ng up or

using a YoLink product or our app.

Find addi onal support and ways to reach us at:

www.yosmart.com/support-and-service

Or scan this QR code with your smartphone

Email us, 24/7 at:

[email protected]

Call us, 9AM to 5PM PaciĮc Standard Time at:

(949) 825-5958

You may chat with us on Facebook (non-urgent ma ers):

www.facebook.com/YoLinkbyYoSmart

Contents

In the Box ······· ····· · ·· · ··1······················ ····· ···················································· · ·

·Introduc on ······························································································ 2

Set Up ····································································································· ···5

Using the YoLink App ···················································································9

About Garage Door Control With Fobs ························································15

Maintenance ······················································································· ····20·

SpeciĮca ons ····················································································· ·····23·

Troubleshoo ng ················································································· ·····25·

Warning ······························································································ ····26·

Customer Service & Warranty ······························································· ····28·

Revised: 09/02/2021

A. In the Box

A. YoLink FlexFob

B. Quick Start Guide

A-1. YoLink FlexFob

A. B.

A. YoLink AlarmFob

B. Quick Start Guide

A-2. YoLink AlarmFob B.A.

B. Introduc on

The YoLink FlexFob is a smart remote that can Ňexibly design ac ons* for each bu on

through YoLink app, control desired ac ons with the YoLink app on your smartphone or

tablet or using the associated bu o n o n t h e d ev i ce .

* Desired ac ons includes enable/disable alarm strategy, scene control (Away, Home, Arm,

Disarm, etc.), trigger ac on devices, etc.

Status LEDs

LEDs are oīǁhen the fob is in

a normal status

1-4 Bu ons

short press (click) / long-press the

associated bu on to run the ac ons

- Audible Status Feedback

One Beep: Ac on Successfully Ran

Three Beeps: Ac on Not Successfully

Ran

Key Ring Slot

Aach the fob to a key ring,

if desired

Ba ery

Compartment

Screw

Compartment

houses two LR44

non-rechargeable

bu on ba eries

B-1. FlexFob

The YoLink AlarmFob is a smart remote with four programmable bu ons, each capable

of performing two pre-set ac ons*, as deĮned by the user, using the YoLink app. The

ac ons assigned to each bu on can be ini ated from the app, as well as from the fob

(refer to ” sec on for addi onal informa on)“Using the YoLink App

*Examples of ac ons include enabling or disabling an alarm strategy, scene control (Home,

Away, Arm, Disarm, etc.), and triggering ac on devices, etc.

B-2. AlarmFob

Status LEDs

LEDs are oīǁhen the fob is in a normal

status

Four Bu ons with Pre-Set Ac ons

Short press (click) or long-press the

associated bu on to run the ac ons

There are four pre-set behaviors for

each bu on

- Audible Status Feedback

One Beep: Ac on Successfully Ran

Three Beeps: Ac on Not Successfully

Ran

Ba ery

Compartment

Screw

Compartment

houses two LR44

non-rechargeable

bu on ba eries

Key Ring Slot

Aach the fob to a

key ring, if desired

The LED light indicates the current status of the YoLink Fob (FlexFob / AlarmFob):

Blinking Red Once, Then Green Once

Device Turned On

Slow Blinking Green Once

Ac ons Run Succeeded

Blinking Red And Green Alternately

Restoring to Factory Defaults

Blinking Green Once

One-click/Long Press (0.5-2s) a Key

Blinking Green

Connec ng to Cloud

Slow Blinking Green

Upda ng

Fast Red Every 30 Seconds Blinking

Ba eries are Low; Please Replace the Ba eries (see page 22)

Slow Blinking Red Once

Ac ons Run Failed

C. Set Up

C-1. Set Up - First-Time YoLink Users (Exis ng users proceed to C-2. Add Device, next page)

The YoLink Hub is required

to set up your YoLink Fob

(FlexFob / AlarmFob).

Please set up your YoLink

Hub Įrst (refer to YoLink

Hub manual)

Power

Adapter

YoLink Hub

Create a new account if

required

Download the YoLink app

through Apple App Store or

Google Play Store (Search in

the store or use the QR code

on the right)

Apple iPhone or tablet that is iOS 9.0

or higher, or an Android phone or

tablet that is Android 4.4 or higher

YS1603-UC

User Guide

2. Ethernet patch cable (included) to

your network (router, switch, etc.),

recommended. Otherwise connect

your Hub to your home 2.4 GHz Wi-Fi

network (only when necessary).

Refer to the Hub set up manual for

more inform on:

1. Make sure your Hub is connected

to the internet (green LED indicator is

blinking, blue LED indicator is always

on)

C-2. Add Device

Ta p “ ” b u on, then scan QR

Code on the device. Follow the

steps to add the device

1. You will need to press any of the four bu ons once again if the device failed to connect to

the cloud

2. Pressing any of the four bu ons at any other me a er this ini al process will result in the

LED blinking green once, only. This indicates the device is connected to the cloud and is

func oning normally

3. If the red LED does NOT blink as noted this may indicate a problem with the Fob. Please see the

troubleshoo ng sec on and the contact sec on for technical support

Press any of the four bu ons once

to turn on the device. The Status

LED will blink red once, then green

several mes, indica ng your

device has connected to the cloud

and is ready to use

Any of the

four bu ons

Do not place the fob on or near

sources of extreme heat or cold

C-3. Device Placement

Your fob is designed

to be portable, but in

addi on to its common

use on a keyring, your

fob comes with a

wall-mount bracket as

well as a car visor clip

b. Add the fob to your

keyring, so that it is

always with your keys

D. Using the YoLink App

D-1. Device Page

Device Ac on History

Historical log of bu on-controlled, logged with associated

bu on and the ac on, dat me

Details

- Tap to go to Details page(refer to page 11)

- Tap to get device manual link, feedback, contact us informa on, etc.

Edit the Bu ons

- Tap to edit the bu ons (refer to page 12)

(FlexFob)

Control the Bu ons

- There are two control methods:

a. Press the bu on to ac vate the related ac on

b. Long press the bu on to ac vate the related ac on

Before using the fob, please choose “conĮrm” to conĮrm

the ini al se ngs

Ba ery Level of YoLink Fob

Shown red if ba ery level is low-

Device Ac on History

Historical log of bu on-controlled, logged with associated

bu on and the ac on, dat me

Details

- Tap to go to Details page(refer to page 11)

- Tap to get device manual link, feedback, contact us informa on, etc.

Control the Bu ons

- There are two control methods:

a. Press the bu on to ac vate the related ac on

b. Long press the bu on to ac vate the related ac on

Edit the Bu ons

- Tap to edit the bu ons (refer to page 12)

(AlarmFob)

Before using the fob, please choose “conĮrm” to conĮrm

the ini al se ngs

Ba ery Level of YoLink Fob

Shown red if ba ery level is low-

D-2. Details Page

d. Add/Remove from favorites

a. Device Type

c. Choose a Room for device

e. Device Ac on History

Historical log of bu on-controlled, logged with associated

bu on and the ac on, dat me

b. Rename the Device

m. Remove Device From Current Account

- Tap to delete the device from your YoLink account

h. Device SN (unique)

g. Device EUI (unique)

f. Device Model

- Tap to get device manual link, feedback, contact us informa on, etc.

I. Temperature Value

- Updates when:

1. SET bu on pressed; 2. On a device alert; 3. Ba eries are replaced;

4. Automa cally within 4 hours maximum

j. Connec on Signal Intensity of sensor and Hub

k. Current Ba ery Level

Shown red if ba ery level is low-

l. Firmware Version

- “#### ready now (refer to page 20)” indicates a new update is available

D-3. Edit the Bu ons

a. Tap the fob bu on that you want

to edit

b. Tap the “+” icon to add a click

(short-press) behavior

c. Tap the “+” icon to add a long

press behavior

d. Tap to save the se ngs

FlexFob AlarmFob

d. For AlarmFob:

Fob is pre-conĮgured with a click

behavior for each of the four

bu ons. You can edit each behavior

in the associated scene (refer to

page 13)

You can assign a scene or automa on assigned to any of the four bu ons in the app, but you can not add

the garage controller as an ac on. This is for safety reasons, to prevent accidental opera on of the door

-Tap "Reset" to restore the se ngs to

factory default (any changes you’ve made

will not be saved);

Tap "Cancel" to exit changing se ngs (any

changes you've made will not be saved)

D-4. Scene

Go to the “Smart” screen (default view is “Scene” screen)

There are four pre-set scenes, you can choose to either edit or delete each of them

a. Tap the “+” icon to add

a scene

b. Add a scene

b-1 Edit name

b-2 Select an icon

b-3 Add/remove from favorites

b-4 Edit behavior (You must

have at least one ac on device,

or you cannot set a behavior)

b-5 Tap to save the se ngs

b-1

b-2

b-5

b-3

b-4

1. Tap “ ” bu on to run the scene

2. Tap “ ” bu on to edit the scene

. Swipe le o edit or to delete the 3scene

c. Click to edit the scene

Swipe Le

D-5. Third-Party Services

Go to Se ngs > Third-Party Services and select the applicable service

Tap “ ” in the upper le corner to go to My ProĮle

With third-party services connected to your YoLink account, your f o b c a n t r i g g e r

automa ons, rou nes and applets with smart home/IoT devices and services from

third-party (non-YoLink) brands

Follow the instruc ons, to authorize and add the connec on to your YoLink account

D-5-1. IFTTT

The YoLink Fob bu ons can be used as a trigger for custom

applets. Visit www.i .com for more informa on and

pricing

D-5-2. Alexa

The Alexa integra on is under development as of the date this manual

was produced

Refer to the associated app or website for addi onal informa on

speciĮc to the third-party service. Addi onal informa on may also

be found on our website at www.yosmart.com/support-and-service

or by contac ng Customer Support (refer to page 28 for contact

informa on)

E. About Garage Door Control With Fobs (Physical Bu on

Control, Only)

Pair your YoLink Fob with the YS4906-UC Garage Door Controller or YS4908-UC YoLink

Finger. When you press the associated bu on, the YoLink Finger will operate (it will open

or close, depending on the current status of the door)

E-1-1. Pairing

C h o o s e t h e fo b b u on you will use for

control of the Garage Door Controller.

Hold this bu on for 5-10 seconds un l

the LED quickly blinks green. Then,

release the bu on

E-1. Pair YoLink Fob with YS4906-UC Garage Door Controller

a. Any of the four

bu ons

(5-10 seconds)

Yo u can a ssi gn a sce ne o r a utoma on assigned to any of the four bu ons in the app, but you can not

add the garage controller as an ac on. This is for safety reasons, to prevent accidental opera on of

the door

b. SET bu on

(5-10 seconds)

Press and hold the SET bu on on the

YoLink Finger for 5-10 seconds un l

the LED quickly blinks green. Then,

release the bu on

Upon pairing, the LED will stop

blinking (this may happen a er only

b l i n k i n g t w o o r t h r e e mes)

Holding the bu on longer than 10 seconds will ABORT the pairing opera on

When you press the associated bu on, the Garage Door Controller will operate

(it will open or close, depending on the current status of the door)

E-1-2. Opera on

To avoid injury or damage, only press the bu on when the garage door area is clear of people and

objects

E-1-3. Unpairing

Press and hold the associated bu on

on the YoLink Fob that you paired with

the garage door controller for 10-15

seconds un l the LED quickly blinks

green, then red, release the bu on

Press and hold the SET bu on on the

paired Garage Door Controller for 10-15

seconds un l the LED quickly blinks

green, then red, release the bu on

b. SET bu on

(10-15 seconds)

Upon up-pairing, the LED will stop

blinking (this may happen a er only

b l i n k i n g t w o o r t h r e e mes)

a. Any of the four

bu ons

(10-15seconds)

The Garage Door Controller will no

longer open or close the garage door

when you press the associated bu on

Holding the bu on longer than 15 seconds will ABORT the unpairing opera on

E-2-1. Pairing

C h o o s e t h e fo b b u on you will use for

control of the Finger. Hold this bu on

for 5-10 seconds un l the LED quickly

blinks green. Then, release the bu on

E-2. Pair YoLink Fob with YS4908-UC YoLink Finger (Garage Controller)

Press and hold the SET bu on on the

YoLink Finger for 5-10 seconds un l

the LED quickly blinks green. Then,

release the bu on

a. Any of the four

bu ons

(5-10 seconds)

Upon pairing, the LED will stop

blinking (this may happen a er only

blinking two or three mes)

SET

DOWN

b. SET bu on

(5-10 seconds)

Holding the bu on longer than 10 seconds

will ABORT the pairing opera on

Page is loading ...

YoLink YS3604-UC User manual

YoLink YS3604-UC User manual

YoLink YS3604-UC User manual

Related papers

Other documents