2. CareCo
  3. EragoPro
EragoPro

CareCo EragoPro User manual

  • Hello! I've reviewed the user manual for the Seat belt. This document provides step-by-step instructions on how to attach the seat belt, including the use of a hex wrench, securing the Velcro loop, and adjusting the length of the belt. I'm ready to answer any questions you might have about installing the seat belt, or anything else within the manual.
  • What tool is required for attaching the seat belt?
    What is the first step in attaching the seat belt?
    Where is the seat belt inserted?
CareCo (UK) Limited, 1 Turing Court, Great Notley, Braintree, CM77 7AT, England
Seat belt
• Remove the side panel rear
Velcro (1).
• Use a hex wrench to remove the
lower backrest canvas retaining
bolts (2).
• Insert the seat belt between
the backrest canvas and the
frame (3).
• Secure the seatbelt Velcro loop.
• Reinstall the lower backrest
canvas retaining bolts using a
hex wrench (4).
• Reattach the side panel rear
Velcro (5).
• Repeat on the other side.
• Adjust the user seatbelt to the
desired length (6).
REQUIRED:
1x Hex Wrench
Attaching the seat belt 1 2
3
5 6
4
/