TALA CP-WHT-SML-WP-01-US Installation guide

Brand
TALA
Model
CP-WHT-SML-WP-01-US
Type
Installation guide

TALA CP-WHT-SML-WP-01-US is a pendant lighting fixture designed to enhance indoor spaces. It features three pendants, each with adjustable cord lengths, allowing for customized placement and height. The fixture is suitable for use above coffee or dining tables, side tables, kitchen islands, bars, stairwells, and walkways. It operates on 120V mains voltage and requires professional installation by a qualified electrician. TALA CP-WHT-SML-WP-01-US comes with a two-year warranty and is part of the Tala family of thoughtfully designed lighting solutions.

TALA CP-WHT-SML-WP-01-US is a pendant lighting fixture designed to enhance indoor spaces. It features three pendants, each with adjustable cord lengths, allowing for customized placement and height. The fixture is suitable for use above coffee or dining tables, side tables, kitchen islands, bars, stairwells, and walkways. It operates on 120V mains voltage and requires professional installation by a qualified electrician. TALA CP-WHT-SML-WP-01-US comes with a two-year warranty and is part of the Tala family of thoughtfully designed lighting solutions.

Scan me for more
technical help
Thoughul lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at us.tala.co.uk
US
BEFORE STARTING
We advise the fitting of our canopy and pendants to be
peormed by a qualified electrician. Please read through
these instructions before commencing work, and keep them
for future reference. Please take extreme care when carrying
out these instructions.
IMPORTANT
This light fitting must be connected to the supply earth.
If your lighting circuit does not have an earth, ask a
qualified electrician to provide an earth facility. This light
fitting is suitable for indoor use only. This fitting operates
on 120V mains voltage. Please visit our website to see our
recommended dimmers.
WARNING
Always switch o electricity supply at the mains during
installation and maintenance. We recommend that the fuse
is withdrawn or the circuit breaker is switched o whilst
work is in progress. Do not just turn o at the wall switch. All
fittings must be installed in accordance with current NFPA 70,
National Electrical Code (NEC).
RECOMMENDED EQUIPMENT
- Small flat head screwdriver
- Wire strippers
- Insulation tape
- M10 (17mm) (5/8IN) wrench or Adjustable wrench
Further equipment may be required for fixing to your ceiling.
IP20 110120V
FOR INDOOR USE ONLY
Installation Guide
TRIPLE PENDANT
SKU  CPWHTSMLGP01US
SKU  CPWHTSMLOP01US
SKU  CPWHTSMLBP01US
SKU  CPWHTSMLWP01US SKU  CPBLKSMLGP01US
SKU  CPBLKSMLOP01US
SKU  CPBLKSMLBP01US
SKU  CPBLKSMLWP01US
Triple Pendant - Provided Components
x1 Ceiling plate
A
A
C
B
B
x1 Ceiling bracket
D
E
x1 M10,
Internal tooth washer
C
x1 Nut
D
x3 Tala Pendants
Oak, Walnut, Brass or
Graphite
or
E
B
STEP 2
Thread all three pendant cables
through ceiling plate cord grips .
E
B
STEP 1
Attach to the ceiling using
screws and plug. Always choose
screws and plugs that are
appropriate for the ceiling.
A
A
Mains supply
Earth
120V IN
Fixings not included
E
STEP 4
Cut o excess cable and strip wires to
expose the copper core. Maintain all
double insulation.
B
Earth
B1
E
STEP 3
Pull pendant cables through cord
grips to your desired length.
Using a flat head screwdriver, tighten
set screws to secure them.
E
B
B1
Mains supply
Earth tag from
ceiling bracket
Brown or Red (L)
White (N)
Pendants
Pendants
Black or Red (L)
Pendants
Blue or
Black (N)
Junction boxes
not included
Household Earth
Earth tag from
ceiling plate
120V IN
120V
B
A
STEP 5
Connect the pendants, plate and
mains wiring as shown.
A
C
D
B
STEP 6
Move up onto . Use toothed
washer and nut to secure it
in place.
Secure by carefully tightening with
the correct sized spanner.
B A
C D
STEP 7
Screw bulbs into pendants
clockwise.
E
E
E
ADJUSTING THE CORD
To adjust the cord to your desired length, using a flat
head screw driver, loosen the grub/set screw and
push the cable up into the ceiling plate.
Secure the cable in place by re-tightening
the grub screw.
Maintain all double insulation.
1
1
A
B
A
B
PENDANT DISPLAY GUIDE
MINIMUM CORD LENGTH
For all bulbs shortest
recommended cord length is 14 in
DISTANCE BETWEEN PENDANTS
Recommended minimum distance
between pendant, dependant on
bulb style, are as follows:
Voronoi I - 6 in
Voronoi II - 8 in
Voronoi III - 1 in
Sphere IV - 6 in
All other bulbs - 4 in
PENDANTS  RECOMMENDED CABLE LENGTHS
SCENARIO 1
Above a coffee or dining table,
or where height is required for
seated tasks
SCENARIO 2
Above side tables, or where
height is required for storage
Minimum Distance
28 in
Minimum Distance
19 in
SCENARIO 3
Above a kitchen island or bar,
or where height is required for
standing tasks
SCENARIO 4
Above a stairwell or walkway,
or where height is required for
walking underneath.
Minimum Distance
32 in
Minimum Distance
7 Ft
WARRANTY AND AFTERCARE
This product has a two-year warranty. If there appears to be
a functional defect with the product during this time, please
contact our team at [email protected].uk.
Please note, the flexible cable attached to this luminaire cannot
be replaced; if the cable is damaged, recycle the luminaire and
seek a replacement.
Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala Energy Ltd. 25B Vyner Street, London, E2 9DG | hello@tala.co.uk
Tala North America, Inc. 2 Research Place, Suite 300, Rockville, MD 20850
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

TALA CP-WHT-SML-WP-01-US Installation guide

Brand
TALA
Model
CP-WHT-SML-WP-01-US
Type
Installation guide

TALA CP-WHT-SML-WP-01-US is a pendant lighting fixture designed to enhance indoor spaces. It features three pendants, each with adjustable cord lengths, allowing for customized placement and height. The fixture is suitable for use above coffee or dining tables, side tables, kitchen islands, bars, stairwells, and walkways. It operates on 120V mains voltage and requires professional installation by a qualified electrician. TALA CP-WHT-SML-WP-01-US comes with a two-year warranty and is part of the Tala family of thoughtfully designed lighting solutions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents