TALA LP-WHT-BP-01-EU is a stylish linear pendant lighting fixture with three Tala pendants, ideal for adding a touch of modern design to your home. It is suitable for indoor use only and requires a 220-240V mains voltage. The pendants can be adjusted to your desired length, and the fixture comes with all the necessary mounting hardware for easy installation.
TALA LP-WHT-BP-01-EU is a stylish linear pendant lighting fixture with three Tala pendants, ideal for adding a touch of modern design to your home. It is suitable for indoor use only and requires a 220-240V mains voltage. The pendants can be adjusted to your desired length, and the fixture comes with all the necessary mounting hardware for easy installation.
EU/UK
Thoughul lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
BEFORE STARTING
We recommend the installation of this light fitting is
peormed by a qualified electrician. Please read the
instructions before commencing work, and keep them
for future reference. Take extreme care when carrying
out these instructions.
IMPORTANT
This light fitting must be connected to the supply earth.
If your lighting circuit does not have an earth, ask a
qualified electrician to provide an earth facility. This light
fitting is suitable for indoor use only. This fitting operates
on 220-240V mains voltage. Please visit our website to
see our recommended dimmers.
WARNING
Always switch o electricity supply at the mains during
installation and maintenance. We recommend that the
fuse is withdrawn or the circuit breaker is switched o
whilst work is in progress. Do not just turn o at the wall
switch. All fittings must be installed in accordance with
current Building Regulations and IEE Wiring Regulations.
RECOMMENDED EQUIPMENT
- Small flat head screwdriver
- Wire strippers
- Insulation tape
- 17mm spanner or adjustable spanner
Further equipment may be required for fixing to your ceiling.
Installation Guide
LINEAR TRIPLE PENDANT
IP20 220 240V
SKU LPWHTBP01EU
Scan me for more
technical help
Linear Triple Pendants - Provided Components
A
B
C
D
x2 M10, Internal tooth washer
x1 Linear Canopy pre-wired with
three Tala Pendants
x2 Nut
x1 Ceiling Bracket
A
B
C
D
E
EScrews and Rawl Plugs
(Always use screws and plugs
that are appropriate to the
ceiling)
STEP 1
Attach to the ceiling using
screws and plugs. Always choose
screws and plugs that are
appropriate for the ceiling.
A
STEP 2
Using the carabiner clips, attach
to and allow the canopy to
hang on the suspension cables.
A
B
A
B
STEP 3
Pull pendant cables through cord
grips to your desired length. Using
a flat head screwdriver, tighten set
screws to secure them.
B1
B2
B3
B2 B3
B1
Pendants
Blue or
Black (N)
Pendant 1
Pendant 2
Pendant 3
Mains Supply
240V IN
Earth tag from
Ceiling Plate
Mains
Blue or
Black (N)
Pendants
Brown or Red
(L)
Mains
Brown or Red
(L)
Household Earth
Earth tag from
Ceiling Bracket
Tidy the excess cable into the Linear Canopy.
STEP 4
If necessary, cut o excess cable and
strip wires to expose the metal core.
Then, re-wire pendants into the Ceiling
plate. Maintain all double insulation.
Connect the Ceiling Bracket to the
Mains Electricity as shown
A
STEP 5
Move up onto and secure
using the and as shown.
A
B
C D
B
A
C
D
STEP 6
Screw in bulbs clockwise
into the pendants.
PENDANT DISPLAY GUIDE
MINIMUM CORD LENGTH
For all bulbs shortest recommended
cord length is 300mm
A
PENDANTS RECOMMENDED CABLE LENGTHS
A
SCENARIO 1
Above a kitchen island or bar,
or where height is required
for standing tasks
Minimum Distance
800mm
SCENARIO 2
Above a coffee or dining table,
or where height is required for
seated tasks
Minimum Distance
700mm
Minimum Distance
2.2m (7 Ft)
SCENARIO 3
Above a stairwell or walkway,
or where height is required
for walking underneath
Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala Studios, 25B Vyner Street, London E2 9DG | +44 20 3026 3246 | [email protected].uk
Tala Europe B.V, Bertus Aafjeshove 40, Nieuwegein 3437JN, Netherlands
This symbol indicates that electrical and electronic equipment (WEEE) should
not be mixed with general household waste. For recovery and recycling, please
take this product to a designated collection point where it will be accepted free
of charge. Many retailers oer this in-store.
Disposing of this product correctly will help save valuable resources and prevent
any potential negative eects on human health and the environment.
CARE AND CLEANING
We recommend cleaning with a so dry cloth. Do not use abrasive
materials as these will damage the finish of the product. Do not use
alcohol or other solvents.
WARRANTY AND AFTERCARE
This product has a two-year warranty. Within this time
we will replace any parts that have functional defects.
Please report any faults by emailing:
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
TALA LP-WHT-BP-01-EU is a stylish linear pendant lighting fixture with three Tala pendants, ideal for adding a touch of modern design to your home. It is suitable for indoor use only and requires a 220-240V mains voltage. The pendants can be adjusted to your desired length, and the fixture comes with all the necessary mounting hardware for easy installation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
TALA Basalt Installation guide
-
TALA Linear Installation guide
-
TALA BSALT-I-SET-TRI-PD-01-EU Installation guide
-
TALA CP-WHT-SML-WP-01-US Installation guide
-
TALA BASALT TRIPLE Pendant Installation guide
-
TALA BSALT-I-SET-TRI-PD-01-US Installation guide
-
TALA Nine Installation guide
-
TALA Basalt Single Pendant in Brass Operating instructions
-
TALA Walnut Nine Pendant User guide
-
TALA BRAS-PAP-01-EU Installation guide
Other documents
-
Golden Lighting 606SFMPRBZTEA Operating instructions
-
-
Hay Pao Steel Pendant User manual
-
Golden Lighting 1094-S BLK-SHG Installation guide
-
-
-
-
-
Hay PC Pendant User manual
-