ON-THE-GO
PERSONAL BLENDER
Instruction Manual
MODEL:
PLA1340
Due to ongoing product improvements, specifications and accessories may
change without notice. Actual product may differ slightly to that depicted.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 1
CONTENTS
02 Welcome
03 Package Contents
03 Technical Specifications
04 Important Safety instructions
07 Assembly and parts
08 Instructions
09 Cleaning and Maintenance
10 Recipes
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 2
WELCOME
Congratulations on choosing to buy a Sheffield product.
All products brought to you by Sheffield are manufactured
to the highest standards of performance and safety, and, as
part of our philosophy of customer service and satisfaction,
are backed by our comprehensive 12 Month warranty.
We hope you will enjoy using your purchase for many years
to come.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 3
PACKAGE CONTENTS
1 x On-The-Go Blender Motor Base
2 x 600ml Bottles
2 x Leak Proof Sipper Lid
1 x Stainless Steel Blade Assembly
1 x Instruction Manual
1 x Warranty Card
Confirm all parts before disposing of carton. Safely dispose
of all plastic bags and other packaging components. They
may be potentially dangerous to children.
TECHNICAL SPECIFICATION
Model: PLA1340
Rated voltage: 220-240V~50-60Hz
Power: 350W
Protection class: II
Max Cont. Use: 1 Minute
Rest Time: 1 Minute
RPM: 21000
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 4
IMPORTANT SAFEGUARDS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Carefully read this manual before using this appliance.
Ensure that you know how the appliance functions and how to operate it.
Maintain the appliance in accordance with the instructions to ensure that it
functions properly.
Keep this manual with the appliance. If the appliance is to be used by a third
party, this instruction manual must be supplied with it.
The safety instructions do not by themselves eliminate any danger completely and
proper accident prevention measures must always be used.
No liability can be accepted for any damage caused by non-compliance with these
instructions or any other improper use or mishandling.
Do not use this appliance if it has been dropped or damaged in any way, or if the
supply cord is damaged.
Intended Use
Intended Purpose: Do not use the appliance for anything other than its intended
purpose, and only use it as described in this manual
Indoor domestic use only: this appliance is intended for indoor domestic use only.
Do not use it outdoors. Do not use in moving vehicles or boats.
This appliance is designed exclusively for private, domestic use in processing non-
heated liquids and foods for human consumption; it is not suitable for commercial
or industrial use.
Only use the appliance on a stable, level surface.
Accessories: Do not use any accessories with the appliance that are not supplied
or specifically recommended.
When using electric appliances always observe safety regulations where applicable to
reduce the risk of fire, electric shock and personal injury.
Always check that the power supply corresponds to the voltage on the rating plate.
Supply Cord and Plug
Always unplug from mains supply when not in use. Do not abuse or damage the power
cord. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard. Do not let the
supply cord touch hot surfaces.
When cleaning or putting the appliance away, switch off the appliance and always pull
out the plug from the socket (pull on the plug, not the cable)
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 5
Double Insulation Safety
This appliance is double insulated for your protection. Do not attempt to repair a
double insulated appliance
Use and Environment
Do not leave unattended while in use.
Do not use outdoors.
Place the Base on a flat, level, stable surface.
Do not let the cord hang over the edge of any table or bench top. Do not leave in
direct sunlight as this may damage the plastic.
Do not continuously operate the blender for more than 1 Minute. After 1 Minute of
continuous use, switch off and allow the appliance to cool for at least 1 minute.
If the blades get stuck, unplug the appliance before you remove the ingredients
that block the blades.
Do not exceed the quantities and processing times indicated in the instruction
manual.
Do not attempt to place the Cup on the Base or remove the Cup from the Base
while the motor is running.
CAUTION: This appliance is not intended to be operated by means of an external
timer or separate remote-control system.
The motor has a thermal circuit breaker that will shut off the electric motor if it
overheats. If the motor shuts off on its own, immediately unplug the Power Cord
and let the motor cool down for at least an hour. When the power cord is
unplugged and the product cools, it will reset and be ready to use again.
Do not use this appliance for any purpose other than those stated in this manual.
NOTE: Do not move the appliance whilst it is in use.
NOTE: When crushing Ice with your blender a small amount of liquid, i.e. Milk, Water
or Juice needs to be added to reduce friction build-up.
Injury Precaution
WARNING: Potential injury from misuse! Avoid contact with all moving parts. Switch
off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use. Care shall be taken when handling the sharp
cutting blades, emptying the bowl and during cleaning. Always disconnect the blender
from the supply if it is left unattended and before assembling, disassembling or
cleaning.
To reduce the risk of injury, never place cutter-assembly blades on base without the
bottle properly attached.
Be careful if hot liquid is poured into the blender as it can be ejected out of the
appliance due to a sudden steaming.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 6
Supervision
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
Damaged or Dropped
Always inspect your appliance before use. Check parts are correctly attached. Do not
use this appliance if it has been damaged, dropped, left outdoors or dropped in water.
Return it to an authorised service dealer for examination and repair.
Water
Do not immerse the appliance or its supply cord in water. Do not use with wet hands
or use in damp situations.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 7
ASSEMBLY AND PARTS
1. Sipper Lid with Carabiner
4. Power Button
2. 600ml Bottle
5. Blade Assembly
3. Motor Base
Before First Use
1. Remove all packaging materials.
2. Remove any stickers or labels from the appliance. (Except the rating label!)
3. Thoroughly clean the bottles, sipper lids and blade assembly with hot water, some
washing-up liquid and a non-abrasive sponge.
4. Wipe the outside of the appliance with a moist cloth. NOTE: Do not immerse the
Power Base or cord in water or other liquids. Do not use abrasive cleaners to
clean any of the parts.
5. CAUTION: Do not plug the product into an electrical outlet until it is fully
assembled.
Note: The first time this appliance is used there may be a small amount of smoke and
odour. This is normal and is due to the protective coating placed on the motor at
manufacture to protect it during shipping.
1
2
4
3
5
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 8
INSTRUCTIONS
NOTICE:
Do not fill the Cups past the MAX mark.
Do not mash or grind heavy foods (e.g., potatoes, meat) or stir thick mixtures
(e.g., dough) in this product.
Do not operate the product empty.
Using Your On-The-Go Blender
1. Place the Motor Base on a flat, level, stable surface. Ensure the power cord is
unplugged.
2. Cut all firm fruits and vegetables into pieces no larger than 2-3cm and place into
the bottle, and then pour in any liquid ingredients. Be sure not to fill the
ingredients past the 600ml level.
3. Ensure the Gasket is seated properly in the Blade Assembly base, and then tighten
the Blade Assembly clockwise onto the top of the Cup.
4. Turn the bottle upside down, line up arrows on the blade assembly to the arrows
on the base, and place the bottle in the base. To lock the bottle, simply turn the
bottle clockwise in the base.
5. Plug in the power cord and press the Power button to operate.
NOTE: Product will not operate unless BOTH the bottle and Blade assembly are
attached and tight and properly attached to the base.
NOTE: When Blending DO NOT operate the product’s motor for more than 1 min
at a time. Allow the motor to cool for 1 minute after each operation.
NOTE: If the Blade assembly is not operating smoothly, stop the product and add
some liquid, or reduce the solid content in the Cup.
6. After the ingredients are fully blended, release the Power button, and unplug from
the power supply.
7. Turn the bottle counter-clockwise and remove from the base.
8. Turn the bottle over and place on a flat surface, carefully remove the blade
assembly replace with the sipper lid for On-The-Go drinking.
NOTE: Do not overload the bottle. If the motor stalls, turn the blender off
immediately, unplug the unit and let it cool for at least 10 minutes.
NOTE: When crushing Ice with your blender a small amount of liquid, i.e. Milk,
Water or Juice needs to be added to reduce friction build-up.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 9
CLEANING and MAINTENANCE
This appliance requires little maintenance. It contains no user-serviceable parts. Any
servicing requiring disassembly other than cleaning must be performed by a qualified
appliance repair technician.
Before Cleaning
When not in use or before cleaning, always disconnect the appliance from the
mains supply.
Never immerse the motor unit in water or any other fluid, not rinse it under the
tap. Use only a moist cloth to clean the motor unit.
Care should be taken when handling the sharp cutting blades, emptying the bowl
and during cleaning.
Care and Cleaning
CAUTION: Never immerse the motor base, plug or cord in water or any other liquid.
Whenever possible, rinse parts immediately after processing to make clean-up
easier.
Always handle blades using the blade collar.
CAUTION: Use extreme care when handling blades. Do not touch the blades with
your fingers. The blades are very sharp and can cause injury if touched.
If necessary, use any small nylon bristle brush (Not included) to remove processed
food from the blade and the blade area.
If some leftover particles dry onto the inside of the bottle or blade assembly, fill
the bottle about ⅔ full with warm soapy water and attach the Blade Assembly.
Place the cup and Blade assembly onto the Motor Base and press the Power
Button. Let the Blade spin for about 20-30 seconds to help loosen the stuck
ingredients.
After use wash all lids in warm soapy water. Rinse and dry thoroughly.
The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
Regularly clean the outside of the appliance with a soft damp cloth and dry it with
a dry towel. Do not immerse in water.
NOTICE: Never use rough scouring pads or abrasive cleansers on any plastic or metal
parts as the surface may be damaged.
Store in a Safe Place
When not in use store your appliance and all its accessories and instruction manual in
a safe and dry place
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 10
RECIPES
We have included a handful of recipes to help you get started with the On-The-Go
Blender. Once you have mastered these you can experiment with your own recipes for
new and exciting meal or snack options!
Please NOTE: The recipes found in this Guide are provided as suggestions only, we
cannot guarantee that favourable results will be obtained from their use and,
therefore, recommend that you conduct appropriate tests under your own operating
conditions prior to adoption.
The recipes are intended for use by persons having appropriate technical skill, at their
own discretion and risk. We assume no obligation or liability, and make no warranties,
with respect to these recipes.
Rise ’N’ Shine Shake
Makes 1 (500ml) serving
Ingredients:
1 cup milk
1 cup strawberries, hulled and halved
1 kiwi, peeled and quartered
1/2 cup strawberry frozen yogurt
1 tablespoon sugar
Directions:
1. Add strawberries, kiwi, frozen yogurt and sugar. Pour milk into the bottle.
2. Fasten the blade assembly on the open end. Turn the bottle upside down the
place it in the base, lining up the arrows on the blade assembly with the arrows on
the base.
3. Press the bottle clockwise to lock it and press the Power button.
4. Blend 20 to 30 seconds or until smooth.
5. Turn the bottle over and place on a flat surface.
6. Replace the blade assembly with the sipping lid.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 11
Raspberry- Lemon Smoothie
Makes 1 (500ml) serving
Ingredients:
1 cup milk
1 teaspoon vanilla
1½ cups frozen raspberries
1 container (175ml) lemon yogurt
Directions:
1. Add raspberries and yogurt, pour milk and vanilla into the bottle.
2. Fasten the blade assembly on the open end. Turn the bottle upside down the
place it in the base, lining up the arrows on the blade assembly with the arrows on
the base.
3. Press the bottle clockwise to lock it and press the Power button.
4. Blend 20 to 30 seconds or until smooth.
5. Turn the bottle over and place on a flat surface.
6. Replace the blade assembly with the sipping lid.
Frozen Hot Chocolate
Makes 1 (500ml) serving
Ingredients:
1 cup milk
2 tablespoons hot cocoa mix
1 cup ice cubes
½ cup chocolate ice cream
1 container (175ml) vanilla yogurt
Directions:
1. Add hot cocoa mix, ice cubes, ice cream and yogurt, pour milk into the bottle.
2. Fasten the blade assembly on the open end. Turn the bottle upside down the
place it in the base, lining up the arrows on the blade assembly with the arrows on
the base.
3. Press the bottle clockwise to lock it and press the Power button.
4. Blend 30 to 45 seconds or until smooth.
5. Turn the bottle over and place on a flat surface.
6. Replace the blade assembly with the sipping lid.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 12
Protein Energy Shake
Makes 1 (500ml) serving
Ingredients:
1 cup plain soymilk
2 tablespoons honey
¼ cup walnuts
¼ to ½ teaspoon ground cinnamon
1¼ cups vanilla soy yogurt
Directions:
1. Add walnuts, cinnamon and yogurt, pour milk and honey into the bottle.
2. Fasten the blade assembly on the open end. Turn the bottle upside down the
place it in the base, lining up the arrows on the blade assembly with the arrows on
the base.
3. Press the bottle clockwise to lock it and press the Power button.
4. Blend 20 to 30 seconds or until smooth.
5. Turn the bottle over and place on a flat surface.
6. Replace the blade assembly with the sipping lid.
Berry Morning Medley
Makes 1 (500ml) serving
Ingredients:
1 cup milk
¼ teaspoon vanilla
¼ cup old-fashioned oats
1 cup frozen mixed berries
1 container (175) plain yogurt
1 tablespoon sugar
Directions:
1. Add the oats, berries, yogurt and sugar; pour milk and vanilla into the bottle.
2. Fasten the blade assembly on the open end. Turn the bottle upside down the
place it in the base, lining up the arrows on the blade assembly with the arrows on
the base.
3. Press the bottle clockwise to lock it and press the Power button.
4. Blend 20 to 30 seconds or until smooth.
5. Turn the bottle over and place on a flat surface.
6. Replace the blade assembly with the sipping lid.
/
