2. Ken A Vision
  3. SC12BH

Ken A Vision SC12BH, SC12CBH, SC12CMH, SC12DH, SC12MH User manual

  • Hello! I am an AI chatbot trained to assist you with the Ken A Vision SC12BH User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MMiiccrroossccooppee RReeppllaacceemmeenntt
HHeeaaddss
Instruction Manual
SC12MH
SC12DH
SC12BH
SC12CMH
SC12CBH
Place your 5/64 (1.98MM) Allen wrench
in the Allen set screw located on the right
side of the microscope. Figure (1)
Loosen screw carefully remove the existing
head. Figure (2)
Locate your new replacement head. Be
sure to remove plastic cap located on the
base of the head.
Figure (3)
Carefully place the replacement head in
the cavity, align and tighten allen set
screw.
Figure (4)
Figure 1
Figure 4
Figure 3
Figure 2
www.ken-a-vision.com
INS-SCHEAD
/