Barco SLite rental structure Installation guide

Type
Installation guide

This manual is also suitable for

SLite re n tal display
Installation manual
R5976644/06
09/07/2004
Barco nv Events
Noordl
aan 5, B-8520 Kuurne
Phone: +32 56.36.89.70
Fax: +32 56.36.88.24
E-mail:
Visit us at the web: www.barco.com
PrintedinBelgium
Copyright ©
All rights reserved. No part of this document may be copied, reproduced o r translated. It shall not otherwise be recorded, transmitted or
stored in a retrieval system without the prior written consent of Barco.
Changes
Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied w ar-
ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the
program(s) described in this publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this
publication; these changes are incorporated in new e ditions of this publication.
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarant ee. On rece
ipt, the purchaser
must immediately inspect all delivered good s for damage incurred during transport, as well a s for material and manufacturing faults Barco
must be informed immediately in writing of any complaints.
The period of guarantee begins on the dat e of transfer of risks, in the case of special systems and softwa re on the date of commissioning,
at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can repair the fault or pro vide a replacement
at its own discretion within an appropriate pe riod. If this mea sure proves to be impossible or unsuccessful, t he purchaser can demand a
reduction in the purcha se price or cancellation of the contract. All other claims, in particular those relating to compensation for direct or
indirectdamage, and alsodamageattributedtotheoperationofsoftware as well as to other services provided by Barco, beinga component
ofthe system or independent service, will be deemed invalid provided the d amage is not proven to be attributed to the absence of properties
guaranteed in writing or due to the intent or gross negligence or part of Barco.
If the purchaser or a third party carries out modifications or repairs on goo
ds delivered by Ba rco, or if the goods are handled incorrectly,
in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not
agreed upon in the contract, all guarantee claims of the purch ase r will be rendered invalid. No t included in th e guarantee coverage are
system failures which are attributed to programs or special electroni
c circuitry provided by the purchaser, e.g. interfaces. Normal wear as
well as normal maintenance are not subject to the guarantee provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations specified in the this manual must be complied with by
the customer.
Trademarks
Brand and product names mentioned in this manual may be trade
marks, registered trade m arks or copyrights of their respective holders.
All bra nd and product names mentioned in this manual serve as comments or examples and are not to b e understood as advertising for
the products or their m an ufactures.
Federal Communications Commission (FCC Statement)
This equipment has been tested and fou nd to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may
cause harmful interference, in which case the user w ill be responsible for correcting any interference.
Table of contents
TABLE OF CONTENTS
1. Safety..................................................................................................................3
1.1 Safetyguidelines ...................................................................................................................... 3
1.2 Important Safety Instructions......................................................................................................... 4
1.3 Important Warnings ................................................................................................................... 5
2. Systemoverview ....................................................................................................7
2.1 Introduction............................................................................................................................ 7
2.2 SLitedisplay tiles...................................................................................................................... 7
2.3 SLiterental structure .................................................................................................................11
2.4 SLiterental flight case ...............................................................................................................12
2.5 SLiterental setup accessories.......................................................................................................14
2.6 CablesforSLiteDisplays............................................................................................................ 15
2.6.1 Power cables .................................................................................................................. 15
2.6.2 Data cables .................................................................................................................... 17
2.7 Rentalpowerbox.....................................................................................................................18
2.8 Digitizer............................................................................................................................... 18
2.9 Controlsoftware...................................................................................................................... 18
3. SetupacompleteSLiterentaldisplaysystem ...............................................................19
3.1 Set upa floormountSLite rental display............................................................................................ 19
3.2 Set up a hanging SLite rental display ............................................................................................... 19
4. Basicsetup procedures..........................................................................................21
4.1 Locating SLite rental structureparts.................................................................................................21
4.2 HandleSLite rental frames........................................................................................................... 21
4.3 HandleSLite rental flightcases......................................................................................................23
4.4 AssembleSLite tile into rental structure.............................................................................................25
4.5 AttachandsecureSLite rental structures ontopofeachother.....................................................................25
4.6 AttachSLite rental structuresnext toeachother.................................................................................... 26
4.7 Attach SLite rental truss beam with a SLite rental structure........................................................................ 27
4.8 Securing a SLite rental truss beam..................................................................................................28
4.9 Attacha SLiterentalstructureon a SLite rental foot................................................................................29
4.10 Installing SLite rental feet............................................................................................................ 30
4.11 Installingtheadjustable foot ......................................................................................................... 31
4.12 Installing aSLite stacker.............................................................................................................32
4.13 Buildup afloor mounted SLite rentaldisplay ....................................................................................... 34
4.14 Build up a hang ing SL ite rental display with truss beams .......................................................................... 35
5. Cabling of the SLiterentaldisplay..............................................................................39
5.1 SLite tile input/output ports........................................................................................................... 39
5.2 Connections with arental power box................................................................................................ 40
5.3 Datacabling .......................................................................................................................... 41
6. Maintenance.........................................................................................................45
6.1 Cleaning SLite tiles...................................................................................................................45
Index......................................................................................................................47
R5976644 SLITE RENTAL DISPLAY 09/07/2004 1
Table of contents
2 R5976644 SLITE RENTAL DISPLAY 09/07/2004
1. Safety
1. SAFETY
1.1 Safety guidelines
Personal protection
Image 1-1
Warning
Image 1-2
Suspended loads
Image 1-3
Hard hat
Image 1-4
Mind your fingers
Be aw are of suspende
d loads, w ear a hard hat to reduce the risk of personal in jury. Mind your fingers while working with heavy
loads.
Installation personnel
This installation must be performed by authorized an d qualified technical personnel only.
Accredited safety officers must ensure the safety of the site, constructio n, assembly, connection, use, dismantling, transport etc. of
such safety cri
tical system s.
Caution
Installation should be performed only after you are thoroughly familiar with all of the proper safety checks and installation instructions.
To do otherwise increa ses the risk of hazards and injury to the user.
Assembly parts are designed for intended use only in conjunction with Barco LED walls.
Do not m odify and/or replicate any component. Barco uses specific materials and manufacturing processes in order to achieve part
strength. Consult Barco for assistance with custom applications.
Always follow Barco installation instructions. Contact Barco if you should ha ve any question regarding the safety of an application.
The manufacturer assumes no liability for incorrect, inadequate, irresponsible or unsafe assembly of systems.
Product care
Structural & mounting components should be kept dry, clean, lubricated (only if recommended), coated p ro perly, and otherwise
maintaine
d in a manner consistent with part design. Barco products must be used in a manner consistent with their de sign and
inspected on a routine basis forsecurity, wear, deformation, corrosion and anyother circumstances that may affect the loadhandling
capability of the part.
Barco recommends inspections at regular intervals for all installations and increasing in frequen cy for more critical installations. If
a part is found to have damage, which may cause a decrease in load capability, the part must be removed for service or replaced
immediately.
Under no circumstances are Barco parts repairable by anyone other than Barco.
R5976644 SLITE RENTAL DISPLAY 09/07/2004
3
1. Safety
1.2 Important Safety Instructions
Instructions:
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
IMPORTA N T, plug holder clamps must be locked firmly on a ll display tile units and power boxes to prevent the possible ingress
of fluids or solid particles. Replace damaged clamps or seals immediately.
Do NOT submerge fully or partly in water or other liquids.
Clean only with m aterials or chemicals that are inert, nonabrasive, noncorrosive and non-marking. Consult the manufacturer
for further advice should any doubts exist regarding any cleaning procedure.
Do not block ventilation openings. Install in accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding type plugs/sockets. If the provided sockets / plugs are damaged
then replaceme nt of the defective parts must be undertaken immediately.
Protect the power/data cords from being walked on or pinched particularly at plugs, c onvenience receptacles, and the point
where they exit from the apparatus. Replace damaged pow er/dat a cords immediately.
Only use attachments/accessories specified by the manufacturer.
Disconnect the power to this a ppara tus during lightning storms or provide suitable additional lightning protection. Unplug this
apparatus when unused for long period of time.
Refer all servicing to qualified service technicians/personnel. Servicing is required when the apparatus has been damaged in
any way, such as po wer-su pply cord or plug is damaged, the apparatus does not operate normally, or has been dropped.
Useonly with systems or peripherals specified bythe manufacturer, or so ld with the apparatus. Usecaut
ion during lifting/moving
or transporting to avoid damage by possible tipping.
Do not make use of the SLite tiles, the SLite rental structures or the SLite stacker to climb on the SLite disp lay.
Do not place a ladder against the SLite display to access the SLite tiles or for other purposes
.
4
R5976644 SLITE RENTAL DISPLAY 09/07/2004
1. Safety
1.3 Important Warnings
Important Warnings:
Risk of electric shock:
Image 1-5
Risk of electrical shock
Risk of electric shock. D o not open. To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable
parts inside. Refer servicing to qualified service personnel.
The lightning flash with a n arrowhead within a triangle is intende
d to tell the user that parts inside this product may cause a risk
of electrical shock to persons.
The exclamation point within a triangle is i ntende d t o te ll the user that important operating and/or servicing instructions are
included in the technical documentation for this equipm
ent.
Maximum ambient temperature:
The maximum recommended ambient tempera ture for the LED wall is 40 °C, the minimum tempe rature is -20 °C.
High leakage current:
The combination of multiple tiles in an installation re sults in increased levels of leakage current. In order to avoid risk of electric
shock due to high leakage curre nt, proper grounding of the installation is required.
Risk of personnel injury:
Secure all tiles in the r ack. As a supplementary safeguard, and in order to protect against the risk of personnel injury, each tile
should be attached to the rack by a safety cable.
Flammable materials:
Keep f lammable materials away from the installation (such as curtains). A lot of e nergy is transferred into heat. The installation
should be such that the amount of air flow required for safe operation of the equipment is not compromised. Proper ventilation
must be provided.
Risk of electric shock / Risk of fire:
Power cables and connectors have bee n designed w ith special properties for outdoor use, and re sist ance a g ainst ingress o f
water. Use only the factory recommended power cables and connectors. Using other cables and connectors may result in risk
of electric shock and risk of fire.
To protect against risk of fire by overloading of power cables, MAXIMUM 3 SLite TILES in one column may be connecte d
electrical in parallel. Each source cable supplying a column of MAXIMUM 3 SLite TILES should be protected by a circuit breaker
or fuses rated 16 A / 250 V.
Disconnect device:
When the appliance inlets of the individual t
iles are not accessible , the socket outlets supplying the rack shall be installed near
the equipment a nd be easily accessible, or a readily accessible gen eral disconnect device shall be incorporated in the fixe d
wiring.
This equipment MUST be earthed:
In order to protect against risk of electric shock, the installation should be properly groun ded. Defeating the purpose of the
grounding type plug will expose you to the risk of electric shock.
Power system:
It is recommended to use a TN-S power distribution system (a power distribution system with a separate neutral and grounding
conductor) in order to avoid large ground currents loops due to voltage differences in the neutral conductor. The total electrical
installation should be protected by an a
ppropriate rated disconnect switch, circuit breakers and Ground Fault Current Inter-
rupters. The installation shall be done according to the local electrical installation codes. In Europe special attention should be
given to EN 60 364, the standard for electrical installation of buildings. In Germany VD E 0100 should be adhered to.
R5976644 SLITE RENTAL DISPLAY 09/07/2004
5
1. Safety
Mains cords:
The power cords delivered with thissystem h ave special properties for safe ty. They are not u ser serviceable. If the power cords
are damaged, replace only with new ones. Never try to repair a power cord.
Data cables:
The data cables provided with this system have special properties for safety. They are not user serviceable. If the data cables
are damaged, replace only with new ones. Never try to repair a data cable. Per requirements of the National Electrical Code®
in the USA , the length o f a data cable must not exceed 42 m (140 f eet) . Avoid exposure of data cables to accidental contact
with lightning or power conductors.
6
R5976644 SLITE RENTAL DISPLAY 09/07/2004
2. System overview
2. SYSTEM OVERVIEW
2.1 Introduction
The fundamental elements of a SLite rental display system are:
SLite display tiles.
SLite rental structure.
SLite rental foot, foot beams and stacker or SLite rental truss beams
Rental power box.
Digitizer.
Control software.
Block diagram SLite rental display system:
Sources Digitizer
Control
PC
Power
box
RS232
Tile 1
SLite Display
Tile 2
Tile 3
Image 2-1
2.2 SLite display tiles
Introduction
The SLite series is designed for ultra-large outdoor LED display installations. The SLite can overlay video an d data sources in their
native quality. A unique video processing feature enables the crea tion of a visual resolution quasi double the physical resolution
defined by the cluster of LED’s sp
read on the surface of the display. The SLite is an IP65 rating rugged module and can be hot
swapped which enables service of a display panel and its components while the rest of the display continues playing.
R5976644 SLITE RENTAL DISPLAY 09/07/2004
7
2. System overview
Image 2-2
Order info SLite tiles
Article No. Description
R9004200
SLite10 tile (S10)
R9004300
SLite14 tile (S14)
R9004400
SLite22 tile (S22)
Specification SLite 10
Name Value
Visual resolut
ion
9,3 mm
Physical reso
lution
18,6 mm
Brightness 6500 NIT
5000 NIT (calibrated @ 6500 ºK)
LED configuration 2R, 2G, 1B
Pixel density (visual) 11449 / (1064 / ft²)
6912 / Tile
Horizontal viewin
g angle
140 º
Ve rtical viewing angle
60 º
Lifetime
Typical : 100.000 hours
Full white (half brightness) : 50.000 hours
Power consumption
Maximum 720 W / Tile
Average 180 W / Tile
Weight/Tile ± 34 Kg / 75 lbs (excluding s tructure )
Processing color : 14 bit
grey-scale : 10 bit / color
Colors
4,4 trilion
Refresh rate 800 Hz minimum (PAL / NTSC)
8 R5976644 SLITE RENTAL DISPLAY 09/07/2004
2. System overview
Name Value
Ruggedness
IP65 (only if all connection ports are used correctly with Barco’s outdoor cables or
dummy plugs for LED-walls)
Temperature range
operating : -20 <> 40 ºC ( -4 <> 104 ºF)
storage : -20 <> 60 ºC (-4 <> 140 ºF)
Humidity
operating : 10 99%
storage : 10 99%
Source compat ibility S-Video, Composite, YUV, RGB, SDI, HDSDI, Data DVI up to UXGA.
Regulation co mpliance
UL—CE—TUV—FCCClassA
Tile dimensions
width : 896 mm (35,3”)
height : 672 mm (26,5 ”)
depth:249mm(9,8)
Specification SLite 14
Name Value
Visual resolution 14 mm
Physical resolution 28,0 mm
Brightness 6500 NIT
5000 NIT (calibrated @ 6500 ºK)
LED configuration 2R, 2G, 1B
Pixel density (visual) 5098 / (474 / ft²)
3072 / Tile
Horizontal viewing angle
140 º
Ve rtical viewing angle
60 º
Lifetime
Typical : 100.000 hours
Full white (half brightness) : 50.000 hours
Power consumption
Maximum 720 W / Tile
Average 180 W / Tile
Weight/Tile ± 34 Kg / 75 lbs (excluding s tructure )
Processing color : 14 bit
grey-scale : 10 bit / color
Colors
4,4 trilion
Refresh rate 800 Hz minimum (PAL / NTSC)
Ruggedness
IP65 (only if all connection ports are used correctly with Barco’s outdoor cables or
dummy plugs for LED-walls)
Temperature range
operating : -20 <> 40 ºC ( -4 <> 104 ºF)
storage : -20 <> 60 ºC (-4 <> 140 ºF)
Humidity
operating : 10 99%
storage : 10 99%
Source compat ibility S-Video, Composite, YUV, RGB, SDI, HDSDI, Data DVI up to UXGA.
R5976644 SLITE RENTAL DISPLAY 09/07/2004 9
2. System overview
Name Value
Regulation co mpliance
UL—CE—TUV—FCCClassA
Tile dimensions
width : 896 mm (35,3”)
height : 672 mm (26,5 ”)
depth:249mm(9,8)
Specification SLite 22
Name Value
Visual resolution 22,4 mm
Physical resolution 22,4 mm
Brightness 6500 NIT
5000 NIT (calibrated @ 6500 ºK)
LED configuration 1R, 1G, 1B
Pixel density (visual) 1991 / (185 / ft²)
1200 / Tile
Horizontal viewing angle
140 º
Ve rtical viewing angle
60 º
Lifetime
Typical : 100.000 hours
Full white (half brightness) : 50.000 hours
Power consumption
Maximum 720 W / Tile
Average 180 W / Tile
Weight/Tile ± 34 Kg / 75 lbs (excluding s tructure )
Processing color : 14 bit
grey-scale : 10 bit / color
Colors
4,4 trilion
Refresh rate 800 Hz minimum (PAL / NTSC)
Ruggedness
IP65 (only if all connection ports are used correctly with Barco’s outdoor cables or
dummy plugs for LED-walls)
Temperature range
operating : -20 <> 40 ºC ( -4 <> 104 ºF)
storage : -20 <> 60 ºC (-4 <> 140 ºF)
Humidity
operating : 10 99%
storage : 10 99%
Source compat ibility S-Video, Composite, YUV, RGB, SDI, HDSDI, Data DVI up to UXGA.
Regulation co mpliance
UL—CE—TUV—FCCClassA
Tile dimensions
width : 896 mm (35,3”)
height : 672 mm (26,5 ”)
depth:249mm(9,8)
10 R5976644 SLITE RENTAL DISPLAY 09/07/2004
2. System overview
SLite tile dimensions
896
6
7
2
5
6
0
189,6
253
,
7
710
Image 2-3
Dimensions given in millimeters.
2.3 SLite rental structure
Introduction
The SLite rental structure provides the flexibility to build SLite based LED display configurations in the format of your choice. The
single tile structure holds one SLite tile (either S10 or S14) and locks together both vertically and horizontally to other structures. In
addition to the rental structure itself, there are specifically designed truss beams for hanging the display and foot assemblies to floor
mount. W hen trussed, a display of 8 tiles high ca n be build; the maximum high when floor mounted with a stacker is 9 tiles.
Order info SLite rental structure
Article No. Description
R9851750
SLite rental structure
Specification SLite rental structure
Name Value
Weight
±14,5 kg (without SLite tile)
Maximum height on base stand
9 SLite rental structures
Maximum height with truss beam
8 SLite rental structures
Dimensions without SLite tile (mm) 896 x 242 x 705,5 (W x D x H)
Dimensions with SLite tile (mm) 896 x 290,6 x 705,5 (W x D x H)
Maximum wind loads
Compliance DIN 1055
Certificates
TUV
R5976644 SLITE RENTAL DISPLAY 09/07/2004 11
2. System overview
Dimensions
229
,
4
206
242
896
6
7
2
7
0
5
,
5
Image 2-4
Dimensions SLite rental structure without SLite tile (Dimensions g
iven in mm).
278
254,6
290,6
896
672
705,5
Image 2-5
Dimensions SLite rental struc
ture with SLite tile (Dimensions given in mm).
2.4 SLite rental flight case
Introduction
The SLite rental flight case holds up to 4 rental structures with tiles mounted inside and is specifically designed to enable fast build
up directly from flight case to display.
12
R5976644 SLITE RENTAL DISPLAY 09/07/2004
2. System overview
Image 2-6
Order info
Article No. Description
R9851814
SLite rental flight case for four SLite rental structures with tiles.
Dimensions
1384
1440
979,5
880
960
Image 2-7
Dimension given in mm.
R5976644 SLITE RENTAL DISPLAY 09/07/2004 13
2. System overview
2.5 SLite rental setup accessories
Base stand setup accessories
CB A
D
H
I
G
F
E
Image 2-8
A. SLite foot beam 4 meter.
B. SLite foot beam 2,4 meter.
C. SLite foot beam 1,2 meter.
D. SLite rental foot.
E. SLite stacker foot.
F. SLite stacker locking key.
G. SLite stacker profile.
H. SLite stacker bridge.
I. SLite adjustable foot.
Truss setup accessories
AB
Image 2-9
A. SLite single truss beam.
B. SLite dual truss beam.
Order info
Article No. Description
R9851915
2 SLite foot beams 4 meter.
R9850176
2 SLite foot beams 2,4 meter.
R9850177
2 SLite foot beams 1,2 meter.
R9851812
1 SLite rental foot.
R9851905
1 SLite stacker foot.
14 R5976644 SLITE RENTAL DISPLAY 09/07/2004
2. System overview
Article No. Description
R9851900
SLite stacker profile assembly:
1 SLite stacker profile.
1 SLite stacker bridge.
3 SLite stacker locking keys.
6 spring co tters.
R9851815
SLite sta cker kit:
1 SLite stacker foot.
4 SLite s tacke r profile assemblies.
R9851810
SLite single truss beam.
R9851811
SLite dual truss beam.
R9851890
SLite 4 meter foot assembly.
2 SLite foot beams of 4 meter.
1 SLite rental foot.
R9851895
SLite 2,4 meter foot assembly.
2 SLite foot beams of 2,4 meter.
1 SLite rental foot.
R9851470
Four adjustable feet.
2.6 Cables for SLite Displays
2.6.1 Power cables
General
Depending on the size and configuration of the SLite display several sizes and types of power cables are neede d.
Order info
Article No. Description Image
R9851760
Waterproof power linking cable (C20 waterproof / C19 waterproof)
0,8 meter.
Used to distribute power vertical from SLite tile to SLite tile.
image 2-10
R9850241
Waterproof power linking cable (C20 waterproof / C19 waterproof)
1,5 meter.
Used to distribute power horizontal from SLite tile to SLite tile.
image 2-11
R9850250
Waterproof power source cable (C20 waterproof / C19 waterproof)
4,5 meter.
Used to distribute power from SLit
e tile to AEC or between Fiberlink
Receiver and SLite tile.
image 2-12
R9850260
Waterproof powe r source cable (C20 waterproof / C19 waterproof) 9
meter.
Used to distribute power from SLite tile to AEC or between Fiberlink
Receiver and SLite tile.
image 2-13
R9851260
Multi p ower cable of 10 m eter.
Used to distribute power betwee
n Custom Power Box and Spider
connector.
R5976644 SLITE RENTAL DISPLAY 09/07/2004 15
2. System overview
Article No. Description Image
R9851261
Multi p ower cable of 20 m eter.
Used to distribute power betwee n Custom Power Box and Spider
connector.
R9851262
Multi p ower cable of 30 m eter.
Used to distribute power betwee n Custom Power Box and Spider
connector.
R9851263
Multi p ower cable of 50 m eter.
Used to distribute power betwee n Custom Power Box and Spider
connector.
R9851264 Multi power cable with custom length.
Used to distribute power betwee n Custom Power Box and Spider
connector.
image 2-17
R9851660
Waterproof Spider connector with 6 power outputs (C 19) with
different lengths. Spider support bracket included.
Used to distribute power from a multi power cable to the SLite tiles.
Maximum 3 SLite tiles per Spider output cable.
image 2-1 4image 2-16
R9851661
Waterproof Spider connector with 6 power outputs (C19) with same
lengths. Spider support bracket included.
Used to distribute power from a multi power cable to the SLite tiles.
Maximum 3 SLite tiles per Spider output cable.
image 2-15 and image 2-16
R9851662
Waterproof Spider connector with 6 power outputs (C19) with custom
lengths. Spider support bracket included.
Used to distribute power from a multi power cable to the SLite tiles.
Maximum 3 SLite tiles per Spider output cable.
R9850280
Package with five d ummy power plugs.
image 2-18
Image 2-10 Image 2-11 Image 2-12
Image 2-13 Image 2-14 Image 2-15
16 R5976644 SLITE RENTAL DISPLAY 09/07/2004
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51

Barco SLite rental structure Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI