Smart Garden 75101-BZ Operating instructions

Type
Operating instructions
www.smartlivinghg.com
Place each Foot Base on the floor. Place the base so that
connector tube which is parallel to the floor faces inwards and
both are facing each other. This will allow you to connect the
support beam across the floor.
Place Support Beam between the Foot Bases and connect.
Connect the End Cap Arms to each Foot Base
Insert the S-Hooks into the hole at the top of each End Cap
Arm .
  • Page 1 1

Smart Garden 75101-BZ Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI