Delta 73846-SS Dimensions Guide

Type
Dimensions Guide

This manual is also suitable for

Lahara
MATERIALS: Base Plate, Posts - Zinc Die Cast
Roller - Brass
Wall Plate - Steel, Zinc Plated
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied
fasteners. Slip product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is
not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted toilet paper holder shall be model ____________________________
(fill in model number) by Liberty Hardware
Manufacturing Corporation.
TOILET PAPER HOLDER
TECHNICAL DATA
3-23/32"
94.3 mm
Lahara
MATERIALS: Base Plate, Post - Zinc Die Cast
Ring - Brass Tube
Wall Plate - Steel, Zinc Plated
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied
fasteners. Slip product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not
available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted towel ring shall be model__________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
TOWEL RING
2"
50.8 mm
8-1/4"
209 mm
2-1/4"
57 mm
7-1/2"
190.5 mm
8-1/2"
215 mm
6-1/2"
165 mm
1/2"
12.7 mm
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com ©2009 LHMC, A Masco Company
  • Page 1 1

Delta 73846-SS Dimensions Guide

Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI