Basco CLCH05A6057XPSV, CLCH05A6057XPBN, CLCH05A6057XPOR Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Basco CLCH05A6057XPSV Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Semi-
Framless
Bypass
Tub &
Shower
Door
CLCH05A
the CLASSIC BYPASS
BECAUSE THE SHOWER IS EVERYTHING
www.BascoShowerDoor.com | 800.45.BASCO
QCI5019
Lysol
Although safety tempered glass is very resistant to breakage, the
glass can still break if unequal pressure is placed on it during
installation. Use caution. In addition, the sharp corners of the
panels can damage tile and floor surfaces, so it is best to handle
the glass panels carefully and protect the edges.
Two primary materials are used to manufacture your new enclosure: tempered glass and
anodized aluminum. To assure a long lasting finish on the enclosure, wipe it down with a towel after each use.
Never use a scouring agent to clean the aluminum.
To install your bath enclosure, you will need the following:
QCI5019 Rev 0 Page 2 Certified 06/21/2016
**If installing on a fiberglass unit you may need to
snip outside corner to match corners on wall jambs
and tub tracks to match radius on fiberglass unit**
J. 2 Towel Bar Trim Rings
S. 1 Nylon Bottom Guide
T. 2 #6 x 3/8” Pan Head Screws
U. 4 Stainless Steel Bumper Inserts
v
U
QCI5019 Rev 0 Page 3 Certified 06/21/2016
Certified 12/13/06
)
3/16”
3/16”
QCI5019 Rev 0 Page 4 Certified 06/21/2016
QCI5019 Rev 0 Page 5 Certified 06/21/2016
QCI5019 Rev 0 Page 6 Certified 06/21/2016
QCI5019 Rev 0 Page 7 Certified 06/21/2016
QCI5019 Rev 0 Page 8 Certified 06/21/2016
/