2. Toro
  3. CE Bagger Compliance Kit, 48in Z Master G3 Mower
CE Bagger Compliance Kit, 48in Z Master G3 Mower

Toro CE Bagger Compliance Kit, 48in Z Master G3 Mower, CE Bagger Compliance Kit, 52in Z Master G3 Mower, CE Bagger Compliance Kit, 60in Z Master G3 Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro CE Bagger Compliance Kit, 48in Z Master G3 Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3394-377RevA
CEBaggerComplianceKit
for48in,52in,or60inZMaster
®
G3Mower
ModelNo.127-0336
ModelNo.127-0337
ModelNo.127-0338
InstallationInstructions
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
Note:Thiskitneedstobeinstalledonmodel78551,78552,78553,78562,78563,78566,or78567BlowerandDrive
KittocreateaCEbagger.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemower.
Warningdecal1
2
Covermissingdecal
1
Installthedecals.
Blowercover1
Bolt(1/4x3/4inch)
1
Washer(1/4inch)
1
Washer(5/16inch)
1
Plasticplug1
3
Pushnut(1/4inch)
1
Installthecovers.
Leftguard
1
Backguard1
Frontguard1
Lowerguard1
Bolt(5/16x3/4inch)
1
4
Flangenut(5/16inch)
1
Installtheguards.
5
Supportrod
1Installthesupportrod.
6
Muferguard
1
Installthemuferguard.
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3394-377*A
1
PreparingtheMower
NoPartsRequired
Procedure
1.Thoroughlycleanmowerdeck.Alldebrismustbe
removedtoensurethekitwilltproperly.
2.Repairallbentordamagedareasandreplaceany
missingparts.
2
InstallingtheDecals
Partsneededforthisprocedure:
1Warningdecal
1
Covermissingdecal
Procedure
1.Removetheexistingblowercover(Figure3).Savethe
hardware.
2.Cleantheareawherethedecalswillgo(Figure1).
3.InstallthedecalsasshowninFigure1.
g013161
Figure1
1.Covermissingdecal
2.Warningdecal
3
InstallingtheCovers
Partsneededforthisprocedure:
1Blowercover
1
Bolt(1/4x3/4inch)
1
Washer(1/4inch)
1
Washer(5/16inch)
1Plasticplug
1
Pushnut(1/4inch)
Procedure
1.Loosenandremovethebottomboltofthemower-deck
curtaintoreleasethecurtain(Figure2).Retainthebolt.
Figure2
1.Bolt
2.Curtain
2.Removetheexistingbeltcoverretainingknoband
discard.
3.Removetheexistingbeltcover(Figure3orFigure4).
4.Attachthebolt(1/4x3/4inch)andaatwasher(5/16
inch)tothebeltcoverwithaatwasher(1/4inch)and
pushnut(1/4inch)(Figure3orFigure4).
5.Installthebeltcoverandtightenthebolt(1/4x3/4
inch)(Figure3orFigure4).
6.Installthenewblowercoverusingtheexisting
hardwarepreviouslyremoved(Figure3orFigure4).
7.Installtheplasticplugintheexistingbeltcover(Figure
3orFigure4).
2
g013159
7
8
Figure3
Formodel78551,78552,78562,and78566(48-inch(122
cm)or52-inch(132cm))
1.Existinghardware5.Plasticplug
2.Newblowercover6.Existingbeltcover
3.Bolt(1/4x3/4inch)7.Washer(1/4inch)
4.Washer(5/16inch)8.Pushnut(1/4inch)
g013160
4
7
Figure4
Formodel78553,78563,and78567(60inch(152cm))
1.Existinghardware5.Plasticplug
2.Newblowercover6.Existingbeltcover
3.Bolt(1/4x3/4inch)7.Pushnut(1/4inch)
4.Washer(5/16inch)
4
InstallingtheGuards
Partsneededforthisprocedure:
1
Leftguard
1Backguard
1Frontguard
1Lowerguard
1
Bolt(5/16x3/4inch)
1
Flangenut(5/16inch)
Procedure
1.Removetheexistinghardwarearoundtheblowerfor
theleftguard,lowerguardandbackguard(Figure5or
Figure6).Saveallexistinghardware
2.Installtheleftguardwithexistinghardware(Figure5
orFigure6).
3.Installthebackguardwithexistinghardware(Figure
5orFigure6).
4.Installthelowerguardwithexistinghardware(Figure
5orFigure6).
5.Installthefrontguardwithabolt(5/16x3/4inch)
andaangenut(5/16inch)(Figure5orFigure6).
3
g016066
1
9
Figure5
Formodel78551,78552,78562,and78566(48-inch(122
cm)or52-inch(132cm))
1.Existinghardware6.Frontguard
2.Leftguard
7.Lowerguard
3.Backguard,52inch
(132cm)
8.Existingnuts
4.Flangenut(5/16inch)
9.Backguard,48inch
(122cm)
5.Bolt(5/16x3/4inch)
Figure6
Formodel78553,78563,and78567(60inch(152cm))
1.Existinghardware
5.Bolt(5/16x3/4inch)
2.Leftguard
6.Frontguard
3.Backguard7.Lowerguard
4.Flangenut(5/16inch)
4
5
InstallingtheSupportRod
Partsneededforthisprocedure:
1
Supportrod
Procedure
1.Slidetheexistingsupportrodoutofthemower-deck
curtain(Figure7);retaintherodforfutureuseofthe
machinewithoutthebagger.
Figure7
1.Curtain2.Supportrod
2.Insertthenewsupportrodintothecurtain(Figure8).
Figure8
1.Curtain2.Supportrod
3.Securethesupportrodandmower-deckcurtainwith
theboltyouremovedin3InstallingtheCovers(page
2)(Figure2).
6
InstallingtheMuferGuard
Partsneededforthisprocedure:
1
Muferguard
Procedure
1.Removetheexistingmuferguardandsavethe
hardware.Savetheexistingmuferguardforusewhen
thebaggerisremoved.
2.Installthenewmuferguardwiththepreviously
removedhardware(Figure9).
Figure9
1.Carriagebolt3.Newmuferguard
2.Flangenut
5
Notes:
6
Notes:
7
/