Toro 48in and 52in E-Z Vac Twin Bagging System, Z Master G3 Mower User manual

Category
Air blowers/dryers
Type
User manual

Toro 48in and 52in E-Z Vac Twin Bagging System, Z Master G3 Mower is a powerful and versatile tool designed to help you keep your lawn looking its best. With its twin bagging system, this mower can collect large amounts of grass clippings and debris, making it ideal for large lawns or areas with heavy grass growth. The E-Z Vac system also features an adjustable baffle that allows you to control the amount of airflow, ensuring that your clippings are evenly distributed in the bags.

Toro 48in and 52in E-Z Vac Twin Bagging System, Z Master G3 Mower is a powerful and versatile tool designed to help you keep your lawn looking its best. With its twin bagging system, this mower can collect large amounts of grass clippings and debris, making it ideal for large lawns or areas with heavy grass growth. The E-Z Vac system also features an adjustable baffle that allows you to control the amount of airflow, ensuring that your clippings are evenly distributed in the bags.

FormNo.3438-488RevA
48inand52inE-ZVac
Twin
BaggingSystemor60inand72in
E-ZVac
TripleBaggingSystem
ZMaster
®
G3Mower
ModelNo.78555—SerialNo.400000000andUp
ModelNo.78562—SerialNo.405700000andUp
ModelNo.78563—SerialNo.405700000andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3438-488*A
ThisproductcomplieswithallrelevantEuropean
directives.Fordetails,pleaseseetheDeclarationof
Incorporation(DOI)atthebackofthispublication.
WARNING
CALIFORNIA
Proposition65Warning
Useofthisproductmaycauseexposure
tochemicalsknowntotheStateof
Californiatocausecancer,birthdefects,
orotherreproductiveharm.
Introduction
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoid
injuryandproductdamage.Youareresponsiblefor
operatingtheproductproperlyandsafely.
Visitwww.Toro.comforproductsafetyandoperation
trainingmaterials,accessoryinformation,helpnding
adealer,ortoregisteryourproduct.
Wheneveryouneedservice,genuineT oroparts,or
additionalinformation,contactanAuthorizedService
DealerorT oroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.Figure1,
Figure2andFigure3identiesthelocationofthe
modelandserialnumbersontheproduct.Writethe
numbersinthespaceprovided.
g003368
Figure1
1.Blowermodelandserialnumberlocation
ModelNo.
SerialNo.
g009306
Figure2
48-and52-inchbaggerserialnumber
1.Baggermodelandserialnumberlocation
g009416
Figure3
60-and72-inchbaggerserialnumber
1.Baggermodelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafetyalertsymbol
(Figure4),whichsignalsahazardthatmaycause
seriousinjuryordeathifyoudonotfollowthe
recommendedprecautions.
g000502
Figure4
1.Safetyalertsymbol
©2020—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA
AllRightsReserved
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Contents
Safety.......................................................................3
TowingSafety.....................................................4
SafetyandInstructionalDecals..........................4
Setup........................................................................7
1PreparingtheMachine.....................................8
2InstallingtheSideBumpers..............................8
3InstallingtheBaggerMounting
Brackets..........................................................9
4InstallingtheHoodAssemblyand
Bags................................................................9
5InstallingtheMuferDeector.........................11
6RoutingtheBlowerBeltintotheBlower
Assembly......................................................12
7InstallingtheBlowerAssembly.......................12
8InstallingtheDischargeTubes.......................14
9InstallingtheBeltCover.................................19
10InstallingtheWeights...................................19
11InstallingtheBumpers..................................21
12AdjustingtheParkingBrake.........................22
13CheckingtheTirePressure..........................22
Operation................................................................23
PositioningtheAdjustableBafe.......................23
EmptyingtheGrassBags.................................23
ClearingObstructionsfromtheBagger
System..........................................................24
RemovingtheBagger.......................................24
UsingtheGrassDeector.................................25
TransportingtheMachine.................................25
OperatingTips.................................................25
Maintenance...........................................................27
RecommendedMaintenanceSchedule(s)...........27
CleaningtheHoodScreen................................27
CleaningtheBaggerandBags.........................27
InspectingtheBlowerBelt................................27
ReplacingtheBlowerBeltfor60-and72-inch
Machines......................................................27
ReplacingtheBlowerBeltfor48-and52-inch
Machines......................................................28
CheckingandAdjustingtheBlower
Latch.............................................................29
GreasingtheIdlerArm......................................29
InspectingtheBagger.......................................30
InspectingtheMowerBlades............................30
InstallingtheMowerBlades..............................30
ReplacingtheGrassDeector..........................30
Storage...................................................................31
Troubleshooting......................................................32
Safety
Becomefamiliarwiththesafeoperationofthe
equipment,withtheoperatorcontrols,andsafety
signs.
Useextracarewithgrasscatchersorother
attachments.Thesecanchangetheoperating
characteristicsandthestabilityofthemachine.
Followthemanufacturer'srecommendations
foraddingorremovingwheelweightsor
counterweightstoimprovestability.
Donotuseagrasscatcheronsteepslopes.A
heavygrasscatchercouldcauselossofcontrol
oroverturnthemachine.
Slowdownanduseextracareonhillsides.Be
suretotravelintherecommendeddirectionon
hillsides.Turfconditionscanaffectthestabilityof
themachine.Useextremecautionwhileoperating
neardrop-offs.
Keepallmovementonslopesslowandgradual.
Donotmakesuddenchangesinspeed,direction,
orturning.
Thegrasscatchercanobstructtheviewtothe
rear.Useextracarewhenoperatinginreverse.
Usecarewhenloadingorunloadingthemachine
intoatrailerortruck.
Neveroperatewiththedischargedeectorraised,
removedoraltered,unlessusingagrasscatcher.
Keephandsandfeetawayfrommovingparts.Do
notmakeadjustmentswiththeenginerunning.
DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKposition,engagethe
parkingbrake,shutofftheengine,removethekey,
andwaitforallmovingpartstostopbeforeleaving
theoperatingposition.
Chockthewheelsbeforeemptyingthegrass
catcheroruncloggingthechute.
Ifyouremovethegrasscatcher,besuretoinstall
anydischargedeectororguardthatmighthave
beenremovedtoinstallthegrasscatcher.Donot
operatethemowerwithouteithertheentiregrass
catcherorthegrassdeectorinplace.
Shutofftheenginebeforeremovingthegrass
catcheroruncloggingthechute.
Donotleavegrassinthegrasscatcherfor
extendedperiodsoftime.
Grasscatchercomponentsaresubjecttowear,
damageanddeterioration,whichcouldexpose
youtomovingpartsorallowobjectstobethrown.
Frequentlycheckcomponentsandreplacewith
themanufacturer'srecommendedparts,when
necessary.
3
TowingSafety
Donotattachtowedequipmentexceptatthehitch
point.
Followtheattachmentmanufacturer's
recommendationforweightlimitsfortowed
equipmentandtowingonslopes.
Neverallowchildrenorothersinorontowed
equipment.
Onslopes,theweightofthetowedequipmentmay
causelossoftractionandlossofcontrol.Reduce
towedweightandslowdown.
Stoppingdistanceincreaseswiththeweightofthe
towedload.Travelslowlyandallowextradistance
tostop.
Makewideturnstokeeptheattachmentclearof
themachine.
Donottowaloadthatweighsmorethanthe
towingmachine.
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyarea
ofpotentialdanger.Replaceanydecalthatisdamagedorlost.
decal1-653558
1-653558
decal98-5954
98-5954
decal103-3508
103-3508
decal106-0871
106-0871
4
decal106-3339
106-3339
decal106-5517
106-5517
1.Warning—donottouchthehotsurface.
decal126-4659
126-4659
1.Warning—hotpulley;allowtocool.
decal126-9451
126-9451
1.Thrownobjectshazard—Donotruntheblowerwithoutthe
entirecollectionsysteminstalledandlatched.
2.Warning–ReadtheOperatorsmanualaboutcounterbalance
weightinstallation.
3.Lossoftractionandsteeringorreducedstabilityhazard–Ez
Vaccounterbalanceweight(s)installedwithouttheEzVac
maycauselossoftractionandsteeringcontrol.TheEzVac
installedwithouttheEzVaccounterbalanceweight(s)can
causereducedstability.Installweight(s)onlywhentheEz
Vacisinstalled.
decal126-9595
126-9595
1.Rotationindicator
2.Impeller/RotatingBladeshazard-Keephandsawayfrom
movingparts.Keepallsafetydevicesinplaceandworking.
Donotreachintotheblowerunlesstherotationindicator
hasstopped.DisengagethePTO,shutofftheengine,
removethekey,andwaitforallmovingpartstostop.
decal133-8061
133-8061
5
decal136-4164
136-4164
1.Warning—readtheOperator’sManual.4.Cutting/dismembermenthazard,impeller—keepawayfrom
movingparts;keepallguardsandcoversinplace.
2.Warning—hearingprotectionmustbeworn.
5.Cutting/dismembermenthazard,impeller—disengagethe
PTO,removethekey,andwaitforallmovingpartstostop.
3.Thrownobjecthazard—donotoperatetheblowerwithoutthe
entiresysteminstalledandlatched.
6.Warning;lossoftraction—donotoperatewithonly
counterbalanceweightsinstalled;donotoperatewithonly
E-ZVacinstalled;operateonlywithbothE-ZVacand
counterbalanceweightsinstalled.
6
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
Preparethemachine.
Leftbumper
1
Rightbumper1
Carriagebolt(3/8x1-1/4inches)
2
2
Flangenut(3/8inch)
6
Installthesidebumpers.
Uppermountingbracket1
Lowermountingbracket1
Carriagebolt(3/8x1-1/4inches)
4
Carriagebolt(1/2x2–1/2inches)
2
Flangenut(3/8inch)
4
3
Flangenut(1/2inch)
2
Installthebaggermountingbrackets.
Hoodassembly1
Bag(48-inchand52-inchdecks)
2
Bag(60-inchand72-inchdecks)
3
4
Pinandhairpin-cotterassembly2
Installthehoodassemblyandbags.
Muferdeector
1
Flangenut(3/8inch)
2
5
Carriagebolt(3/8x1-1/4inches)
2
Installthemuferdeector.
6
Blowerbelt(fromBlowerandDriveKit)
1
Routetheblowerbeltintotheblower
assembly.
Blowerassembly(fromtheBlowerand
DriveKit)
1
7
Spring(fromtheBlowerandDriveKit)
1
Installtheblowerassembly.
Uppertube1
Lowertube1
Bolt(#10x3/4inches)
3
Locknut(#10)
3
8
Washer(7/32inch)
3
Installthedischargetubes.
9
Beltcover(fromBlowerandDriveKit)
1Installthebeltcover.
Casterweight(ifneeded)
2
Clevispin
2
Hairpincotter2
Lockwasher(3/8inch)
6
Weight-mountbracket1
Bolt(3/8x1-1/2inches)
6
Flatwasher(3/8inch)
6
Carriagebolt(5/16x3/4inch)
3
Flangenut(5/16inch)
3
Frontweight(48-inch,52-inch,and
60-inchdecks)
3
Frontweight[72-inchdecks(serial
number406294344andbelow)]
1
10
Frontweight[72-inchdecks(serial
number406294345andabove)]
2
Installtheweights.
7
ProcedureDescription
Qty.
Use
Bumper2
Spacer
2
11
Locknut(5/16inch)
2
Installthebumpers(formachineswith
MyRide™suspensionsystem).
12
Nopartsrequired
Adjusttheparkingbrake.
13
Nopartsrequired
Checkthetirepressure.
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
PreparingtheMachine
NoPartsRequired
Procedure
Performthefollowingproceduretopreparethe
machineforattachingtheblowerandnishingkit.
1.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKEDposition,and
engagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Repairallbentordamagedareasofmachine
deckandreplaceanymissingparts.
4.Cleanthemachineofanydebrisonthemachine
deckorrearpartofthemachinetoease
installation.
2
InstallingtheSideBumpers
Partsneededforthisprocedure:
1
Leftbumper
1Rightbumper
2
Carriagebolt(3/8x1-1/4inches)
6
Flangenut(3/8inch)
Procedure
1.Removethenutsandboltsholdingtheside
bumperstothemachine(Figure5).
Note:Discardallnutsandonlythe1bolt
removedfromeachside.
2.Installthenewleftandrightsidebumperswith2
carriagebolts(3/8x1-1/4inches),4previously
removedcarriagebolts,and6angenuts(3/8
inch)asshowninFigure5.
g009214
Figure5
1.Flangenut(3/8inch)4.Leftbumper
2.Rightbumper
5.Bolt(3/8x1-1/4inches)
3.Useexistingbolts
8
3
InstallingtheBagger
MountingBrackets
Partsneededforthisprocedure:
1Uppermountingbracket
1Lowermountingbracket
4
Carriagebolt(3/8x1-1/4inches)
2
Carriagebolt(1/2x2–1/2inches)
4
Flangenut(3/8inch)
2
Flangenut(1/2inch)
Procedure
1.Installthelowermountingbrackettothe
machineframewith4carriagebolts(3/8x1-1/4
inches)and4angenuts(3/8inch)asshown
inFigure6.
2.Installtheuppermountingbrackettotheleftand
rightsidebumperswith2carriagebolts(1/2x
2-1/2inches)and2angenuts(1/2inch)as
showninFigure6.
g009215
Figure6
1.Carriagebolt(1/2x2-1/2
inches)
4.Lowermountingbracket
2.Uppermountingbracket
5.Carriagebolt(3/8x1-1/4
inches)
3.Flangenut(1/2inch)6.Flangenut(3/8inch)
4
InstallingtheHood
AssemblyandBags
Partsneededforthisprocedure:
1Hoodassembly
2
Bag(48-inchand52-inchdecks)
3
Bag(60-inchand72-inchdecks)
2Pinandhairpin-cotterassembly
Procedure
1.Positionthehoodassemblyonitsback.
2.Slidehooksontothelowermountingbracket
(Figure7).
3.Rotatethehoodassemblyuponthelower
baggermountingbracket(Figure7).
4.Aligntheholeinthebaggerwiththeupper
mountingbracket(Figure7).
5.Installthepinandsecureitwiththehairpin
cotteronbothsides(Figure7).
9
g009421
Figure7
1.Lowermountingbracket4.Hairpincotterconnected
tolanyard
2.Hook5.Pinconnectedtolanyard
3.Hoodassembly
6.Installthebagtabintothenotchinthehood
assembly(Figure8orFigure9).
Note:Dothisforallthebags.
Note:Thebagswillrestonthebaggerframe.
g003264
Figure8
Twinbaggershown
1.Hoodassembly4.Notch
2.Bag
5.Baggerframe
3.Bagtab
10
g009301
Figure9
Triplebaggershown
1.Hoodassembly4.Notch
2.Bag
5.Baggerframe
3.Bagtab
7.Lowerthebaggerhoodoverthebags(Figure
10orFigure11).
g003268
Figure10
Twinbaggershown
1.Hood3.Baggerlatch
2.Bag4.Latchhook
g003265
Figure11
Triplebaggershown
1.Hood3.Baggerlatch
2.Bag4.Latchhook
8.Positionthebaggerlatchunderthelatchhook
(Figure12).
9.Pushdownonbaggerlatchuntilitlocksinto
place(Figure12).
g003267
Figure12
1.Baggerlatch2.Latchhook
11
5
InstallingtheMufer
Deector
Partsneededforthisprocedure:
1
Muferdeector
2
Flangenut(3/8inch)
2
Carriagebolt(3/8x1-1/4inches)
Procedure
Installthemuferdeectortothesideofthebagger
frame(Figure13).
Note:Ensurethemuferdeectorispositionedover
thetailpipeofthemufer.
g009417
Figure13
1.Muferdeector3.Carriagebolt(3/8x1-1/4
inches)
2.Flangenut(3/8inch)
6
RoutingtheBlowerBelt
intotheBlowerAssembly
Partsneededforthisprocedure:
1
Blowerbelt(fromBlowerandDriveKit)
Procedure
1.For60-and72-inchmachinedecks,installthe
beltaroundtheblowerpulley(Figure14).
g003398
Figure14
Blowerfor60-and72-inchmachines
1.Idlerpulley
4.Springpeg
2.Machinedeckpulley5.Belt
3.Spring
6.Blowerpulley
2.For48-and52-inchmachines,loosenthe
belt-guidebolt(Figure15).
3.Installthebeltaroundtheblowerpulleyand
xed-idlerpulley(Figure15).
4.Tightenthebelt-guidebolt.
g003454
Figure15
1.Idlerpulley5.Belt
2.Machinedeckpulley6.Belt-guidebolt
3.Spring
7.Fixed-idlerpulley
4.Springpeg
8.Blowerpulley
12
7
InstallingtheBlower
Assembly
Partsneededforthisprocedure:
1
Blowerassembly(fromtheBlowerandDriveKit)
1
Spring(fromtheBlowerandDriveKit)
Procedure
WARNING
Anuncovereddischargeopeningcouldallow
thelawnmowertothrowobjectsatyouor
bystanders,resultinginseriousinjury.Also,
contactwiththebladecouldoccur.
Neveroperatethelawnmowerunlessyou
installacoverplate,amulchplate,ora
grasschuteandcatcher.
Makesurethatthegrassdeectoris
installedwhenthegrasschuteandcatcher
areremoved.
1.Removethesidedischargechutefromthe
mowerdeck(Figure16).
Note:Saveallthehardwareandtheside
dischargechute.Installthesidedischargechute
whenthebaggerandblowerareremoved.
g002519
Figure16
1.Bolt
5.Springinstalled
2.Spacer6.Grassdeector
3.Locknut
7.Lendofspring(place
behindthedeckedge
beforeinstallingthebolt)
4.Spring8.J–hookendofspring
2.Slidetheblower-assemblypegintothepivot
hole(Figure17orFigure18).
g009420
Figure17
48-and52-inchmowerdeckshown
1.Blowerassembly3.Pivothole
2.Mowerdeck4.Blower-assemblypeg
13
g009220
Figure18
60-and72-inchmowerdeckshown
1.Blowerassembly3.Pivothole
2.Mowerdeck4.Blower-assemblypeg
3.Closetheblowerassemblytoseeifthelatches
areadjustedcorrectly.
Note:Loosenortightentheboltsothelatches
rmlyholdtheblowerassemblyagainstthe
mowerdeck,butcanbereleasedbyhand
(Figure19).
g003400
Figure19
1.Latch3.Blowerassembly
2.Bolt
4.InstallthespringasshowninFigure20.
Note:Makesurethatthehooksareinthe
correctposition.
g003638
Figure20
1.Spring-loadedidlerpulley
3.Long-hookend
2.Short-hookend
5.Pullthespring-loadedidlerpulleybackand
routethebeltaroundthemower-deckpulley.
Note:Ensurethatthebeltisroutedaroundthe
blowerpulleyscorrectly(Figure21).
g003399
Figure21
1.Mower-deckpulley3.Blower
2.Spring-loadedidlerpulley
14
8
InstallingtheDischarge
Tubes
Partsneededforthisprocedure:
1Uppertube
1Lowertube
3
Bolt(#10x3/4inches)
3
Locknut(#10)
3
Washer(7/32inch)
Procedure
Important:Makesurethatthemowerdeckisin
thelowestheight-of-cutpositionwhileinstalling
thedischargetubes.
Note:Remembertoreplacethegrassdeectorwhen
thebaggerisremovedfromthemachine.Referto
ReplacingtheGrassDeector(page30).
1.DisengagethePTOandengagetheparking
brake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Lowerthemachinedecktothelowest
height-of-cutposition.
4.Removethebagsforviewingthetubeunder
thehood.
5.Installtheuppertubeintothebaggeropening
andpullitbackoutsothattherubbersealis
protrudingout(Figure22orFigure23).
g009304
Figure22
Twinbaggershown
1.Uppertube3.Baggerhood
2.Baggeropening
g009302
Figure23
Triplebaggershown
1.Uppertube3.Baggerhood
2.Baggeropening
6.Withthehoodinthedownposition,measurethe
distancethetubeisinsidethehood.
Measurefromthehoodplatetotheedgeofthe
tubeasshowninFigure24.
Note:Thisdistanceneedstobe19mm(3/4
inch).
15
g003388
Figure24
1.Hoodplate
4.19mm(3/4inch)
2.Uppertube
5.Edgeoftube
3.Hoodinthedownposition
7.Oncethe19mm(3/4inch)measurementhas
beenachieved,marktheuppertubeonthe
outsidewheretherubbersealprotrudesout
(Figure25).
Note:Thisismarkedtoensurethecorrect
positionfortheuppertubewhendrillingthe
holesandconnectingtheupperandlowertubes.
Note:Therubbersealmustprotrudeoutfrom
thebaggerhood.
g003393
Figure25
1.Uppertube3.Baggerhood
2.Rubbersealprotrudingout4.Markhereagainstthe
rubberseal
8.Installthelowertubeintotheuppertube(Figure
26).
g003424
Figure26
1.Lowertube2.Uppertube
9.Slidethelowertubeontothebootandlatch
themtogether(Figure27orFigure28).
Note:Thereisalatchonthetopandbottom
oftheblowerhousing.
16
g003449
Figure27
Twinbaggershown
1.Blowerassembly
3.Latch(twinbaggershown)
2.Lowertube
g003423
Figure28
Triplebaggershown
1.Blowerassembly
3.Latch(triplebagger
shown)
2.Lowertube
10.Makesurethatthemachinedeckisinthelowest
height-of-cutposition.
11.ChecktomakesurethatthemarkfromFigure
25isstillinplace.
12.Usingthe3holesorindentationsintheupper
tubeasatemplate,drill3holes(7/32inch
diameter)wheretheupperandlowertubesjoin
together(Figure29).
17
g003390
Figure29
1.Baggerhood4.Lowertube
2.Uppertube5.Blowerassembly
3.Drill7/32inchdiameter
holeshere(useuppertube
asatemplate)
13.Removethelowertubefromtheblower.
14.Jointheupperandlowertubeswith3bolts(#10
x3/4inches),3atwashers(7/32inch),and3
locknuts(#10)asshowninFigure30.
g003392
Figure30
1.Lowertube
4.Locknut(#10)
2.Uppertube
5.Bolt(#10x3/4inches)
3.Flatwasher(7/32inch)
15.Installthelowertubeontotheblowerhousing
andsecureitwiththelatches.
16.Installthebagsontothebagger.
18
9
InstallingtheBeltCover
Partsneededforthisprocedure:
1
Beltcover(fromBlowerandDriveKit)
Procedure
1.Lowerthemowerdecktothelowestheight-of-cut
position.
2.Installthenewbeltcoversothatthenotcheson
bothsidesgooverthebelt-coversupportsand
securethelatch(Figure31orFigure32).
g009305
Figure31
48-and52-inchbaggershown
1.Beltcover3.Notch
2.Belt-coversupport
g009303
Figure32
60-and72-inchbaggershown
1.Beltcover3.Notch
2.Belt-coversupport
10
InstallingtheWeights
Partsneededforthisprocedure:
2
Casterweight(ifneeded)
2
Clevispin
2Hairpincotter
6
Lockwasher(3/8inch)
1Weight-mountbracket
6
Bolt(3/8x1-1/2inches)
6
Flatwasher(3/8inch)
3
Carriagebolt(5/16x3/4inch)
3
Flangenut(5/16inch)
3
Frontweight(48-inch,52-inch,and60-inchdecks)
1
Frontweight[72-inchdecks(serialnumber406294344
andbelow)]
2
Frontweight[72-inchdecks(serialnumber406294345
andabove)]
Procedure
TocomplywithANSI/OPEIB71.4-2012Standard,add
weightstothemachine.
19
CAUTION
Thebaggeraddsalotofweighttotherear
ofthemachineandmaycauseanunstable
conditionwhichcouldresultinalossof
control.
Thefollowingtableshowswhatweightsareused
whenabaggerisinstalled.
Frontweights
used
Casterweights
used
48-inchmachine
deckwithbagger
30
52-inchmachine
deckwithbagger
30
60-inchmachine
deckwithbagger
32
72-inchmachine
deckwithbagger
(serialnumber
406294344and
below)
12
72-inchmachine
deckwithbagger
(serialnumber
406294345and
above)
22
1.Installcasterweightsonthefrontcasterswitha
clevispinandahairpincotter(Figure33).
2.Installthenutontoeachtapboltandinstallthe
tapboltsintoeachweight(Figure33).
3.Tightenthetapboltsoittouchestheframeand
thentightenthejamnutagainsttheweight.
g009224
Figure33
1.Tapbolt(3/8x1-1/2
inches)
4.Hairpincotter
2.Nut(3/8inch)5.Clevispin
3.Casterweight
6.Installthetapboltagainst
theframeandtightenthe
nut.
4.Installtheweight-mountbracketunderthe
footrestwith2carriagebolts(5/16x3/4inch)
and2angenuts(5/16inch)asshowninFigure
34).
g009226
Figure34
1.Carriagebolt(5/16x3/4
inch)
3.Flangenut(5/16inch)
2.Weight-mountbracket
5.Installthefrontweightsontopofthefootrest
(Figure35).
6.Securethefrontweightsontopofthefootrest
andtotheweight-mountbracketwith6bolts
(3/8x1inch),6lockwashers(3/8inch),3ange
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Toro 48in and 52in E-Z Vac Twin Bagging System, Z Master G3 Mower User manual

Category
Air blowers/dryers
Type
User manual

Toro 48in and 52in E-Z Vac Twin Bagging System, Z Master G3 Mower is a powerful and versatile tool designed to help you keep your lawn looking its best. With its twin bagging system, this mower can collect large amounts of grass clippings and debris, making it ideal for large lawns or areas with heavy grass growth. The E-Z Vac system also features an adjustable baffle that allows you to control the amount of airflow, ensuring that your clippings are evenly distributed in the bags.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI