Franklin Brass 9097SN Specification

Type
Specification
Recessed Fixtures
MATERIALS: Recessed Item - Stamping Brass, 20 Gauge
Post - Zinc Die Cast
Toilet Paper Holder - Stamping Brass
INSTALLATION: Cut a square hole in wall 5-1/4" x 5-1/4". Fasten with wood screws provided into the wood backing
or into studs.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following
fasteners are suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Recessed paper holder shall be model ____________________________
(fill in model number) by Liberty Hardware
®
Manufacturing Corporation.
RECESSED PAPER HOLDER - 9097
TECHNICAL DATA
Recessed Fixtures
MATERIALS: Recessed Item - Stamping Brass, 20 Gauge
Post - Zinc Die Cast
Bar - Brass Tube 3/4" O.D. x 20 Gauge, Seamless Drawn Tubing
Soap Holder - Injection Molded Polystyrene
INSTALLATION: Cut a square hole in wall 5-1/4" x 5-1/4". Fasten with wood screws provided into the wood backing
or into studs.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following
fasteners are suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Recessed soap holder with bar shall be model ____________________________
(fill in model number) by Liberty Hardware
®
Manufacturing Corporation.
RECESSED SOAP HOLDER w/BAR - 9098
6-9/32"
159.5 mm
6-9/32"
159.5 mm
3-29/32"
99.2 mm
3-3/4"
95.3 mm
3-7/32"
81.8 mm
4-25/32"
121.4 mm
1-1/4"
31.8 mm
6-9/32"
159.5 mm
6-9/32"
159.5 mm
3-15/16"
100 mm
3-3/4"
95.3 mm
2-1/32"
51.6 mm
Liberty Hardware
®
Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2008 LHMC, A Masco Company
  • Page 1 1

Franklin Brass 9097SN Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI