415-00 Information and Entertainment System - General Information 2021 Bronco
Removal and Installation Procedure revision date: 05/24/2021
Subwoofer Speaker
Removal
NOTE: Removal steps in this procedure may contain installation details.
NOTE: The 5-door subwoofer speaker is shown, the 3-door subwoofer speaker is similar.
1. Remove the DSP.
Refer to: Audio Digital Signal Processing (DSP) Module (415-00 Information and Entertainment System - General
Information, Removal and Installation).
2. Disconnect the electrical connector.
3. Remove the nuts, the bolts and the subwoofer speaker.
Torque: 62 lb.in (7 Nm)