Altronix T2MK3F4 Installation guide

Brand: Altronix

Model: T2MK3F4

Category: Security device components

Type: Installation guide

Altronix T2MK3F4 is a fully assembled 4-door access control kit that integrates seamlessly with Mercury security systems. Designed for versatile use, it combines a Trove2 enclosure, TM2 Altronix/Mercury backplane, eFlow6NB power supply/charger, ACM4 fused access power controller, VR6 voltage regulator, and PDS8 dual input power distribution module. With its 24VDC power output, the kit provides ample power for various access control devices. The included components are UL Listed sub-assemblies, ensuring reliability and compliance with safety standards.

4 Door Kits:

T2MK3F4

Fully assembled kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) eFlow6NB - Power Supply/Charger

- (1) ACM4 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

T2MK3F4Q

Fully assembled kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) eFlow6NB - Power Supply/Charger

- (1) LINQ2 - Network Communications Module

- (1) ACM4 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

8 Door Kits:

T2MK3F8

Fully assembled kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) eFlow6NB - Power Supply/Charger

- (1) ACM8 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

T2MK3F8Q

Fully assembled kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) eFlow6NB - Power Supply/Charger

- (1) LINQ2 - Network Communications Module

- (1) ACM8 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

T2MK7F8

Fully assembled kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) eFlow104NB - Power Supply/Charger

- (1) ACM8 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

T2MK7F8Q

Fully assembled kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) eFlow104NB - Power Supply/Charger

- (1) LINQ2 - Network Communications Module

- (1) ACM8 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

16 Door Kits:

T2MK75F16

Fully assembled kit includes:

- Trove2 enclosure with TM2 Altronix/Mercury

backplane and TMV2 door backplane

- (1) eFlow104NB and (1) eFlow102NB -

Power Supply/Chargers

- (2) ACM8 - Fused Access Power Controllers

- (1) PD16W - Power Distribution Module

T2MK75F16Q

Fully assembled kit includes:

- Trove2 enclosure with TM2 Altronix/Mercury

backplane and TMV2 door backplane

- (1) eFlow104NB and (1) eFlow102NB -

Power Supply/Chargers

- (1) LINQ2 - Network Communications Module

- (2) ACM8 - Fused Access Power Controllers

- (1) PD16W - Power Distribution Module

T2MK77F16

Fully assembled kit includes:

- Trove2 enclosure with TM2 Altronix/Mercury

backplane and TMV2 door backplane

- (2) eFlow104NB - Power Supply/Chargers

- (2) ACM8 - Fused Access Power Controllers

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

T2MK77F16Q

Fully assembled kit includes:

- Trove2 enclosure with TM2 Altronix/Mercury

backplane and TMV2 door backplane

- (2) eFlow104NB - Power Supply/Chargers

- (1) LINQ2 - Network Communications Module

- (2) ACM8 - Fused Access Power Controllers

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Power Distribution Module

Rev. TMK051217

Installing Company: _________________________ Service Rep. Name: __________________________________________

Address: _________________________________________________________ Phone #: _________________________

All registered trademarks are property of their respective owners. More than just power.™

Installation Guide

Access & Power Integration

Altronix Trove2/Mercury Kits with Fused Outputs

All components of these Trove kits are UL Listed sub-assemblies.

Please refer to the included corresponding Sub-Assembly Installation Guides for further information.

- 2 - Trove2/Mercury Fused Kits Installation Guide

Overview:

Altronix Trove Mercury kits are pre-assembled and consist of Trove2M2 enclosure/backplane with factory installed Altronix power supply/charger(s) and sub-

assemblies. These kits also accommodate various combinations of Mercury boards for up to sixteen (16) doors in a single enclosure.

Configuration Chart:

Altronix

Model Number

Networkable

120VAC 60Hz

Input Current (A)

Power Supply Board

Input Fuse Rating

Power Supply Board

Battery Fuse Rating

Nominal DC Output Voltage

Maximum Supply

Current for Main and

Aux. Outputs on Power

Supply board and

ACM4/ACM8 Access

Power Controller’s

outputs

Fail-Safe/Fail-Secure or

Dry Form “C” Outputs

Current Per

ACM4/ACM8 Output (A)

ACM4/ACM8 Board

Input Fuse Rating

ACM4/ACM8 Board

Output Fuse Rating

PDS8 Board

Input Fuse Rating

PDS8 Board

Output Fuse Rating

PD8UL/PD16W Board

Output Fuse Rating

Power Supply

[DC] [Aux] [DC] [Aux]

Output Range

(VDC)

Output Range

(VDC)

Output Range

(VDC)

Output Range

(VDC)

T2MK3F4 – 3.5 5A/

250V

10A/

32V

20.19-

26.4

20.19-

26.4 – – 24VDC @ 5.8A 4 2.5 10A/

250V

3A/

250V

10A/

250V

3A/

250V –

T2MK3F4Q P3.5 5A/

250V

10A/

32V

20.19-

26.4

20.19-

26.4 – – 24VDC @ 5.8A 4 2.5 10A/

250V

3A/

250V

10A/

250V

3A/

250V –

T2MK3F8 – 3.5 5A/

250V

10A/

32V

20.19-

26.4

20.19-

26.4 – – 24VDC @ 5.8A 8 2.5 10A/

250V

2.5A/

250V

10A/

250V

3A/

250V –

T2MK3F8Q P3.5 5A/

250V

10A/

32V

20.19-

26.4

20.19-

26.4 – – 24VDC @ 5.8A 8 2.5 10A/

250V

2.5A/

250V

10A/

250V

3A/

250V –

T2MK7F8 – 4.5 6.3A/

250V

15A/

32V

20.17-

26.4

20.28-

26.4 – – 24VDC @ 9.2A 8 2.5 10A/

250V

2.5A/

250V

10A/

250V

3A/

250V –

T2MK7F8Q P4.5 6.3A/

250V

15A/

32V

20.17-

26.4

20.28-

26.4 – – 24VDC @ 9.2A 8 2.5 10A/

250V

2.5A/

250V

10A/

250V

3A/

250V –

T2MK75F16 – 8

6.3A/

250V 15A/

32V

20.17-

26.4

20.28-

26.4

9.7-

13.2

10.03-

13.2

12VDC @ 9.3A

24VDC @ 9.2A 16 2.5 10A/

250V

2.5A/

250V – – 3.5A/

250V

5A/

250V

T2MK75F16Q P8

6.3A/

250V 15A/

32V

20.17-

26.4

20.28-

26.4

9.7-

13.2

10.03-

13.2

12VDC @ 9.3A

24VDC @ 9.2A 16 2.5 10A/

250V

2.5A/

250V – – 3.5A/

250V

5A/

250V

T2MK77F16 – 9 6.3A/

250V

15A/

32V

20.17-

26.4

20.28-

26.4

20.17-

26.4

20.28-

26.4 24VDC @ 9.2A 16 2.5 10A/

250V

2.5A/

250V

10A/

250V

3A/

250V –

T2MK77F16Q P96.3A/

250V

15A/

32V

20.17-

26.4

20.28-

26.4

20.17-

26.4

20.28-

26.4 24VDC @ 9.2A 16 2.5 10A/

250V

2.5A/

250V

10A/

250V

3A/

250V –

Installation Instructions:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction.

Product is intended for indoor use only.

1. Remove backplane(s) from enclosure. Do not discard hardware.

2. Mark and predrill holes in the wall to line up with the top three keyholes in the enclosure. Install three upper fasteners

and screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the three upper

screws, level and secure. Mark the position of the lower three holes. Remove the enclosure. Drill the lower holes

and install the three fasteners. Place the enclosure’s upper keyholes over the three upper screws. Install the three

lower screws and make sure to tighten all screws.

3. Mount included UL Listed tamper switch (Altronix Model TS112 or equivalent) in desired location, opposite

hinge. Slide the tamper switch bracket onto the edge of the enclosure approximately 2” from the right side

(Fig. 1, pg. 2). Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed

reporting device. To activate alarm signal open the door of the enclosure.

4. Refer to the eFlow Power Supply/Charger Installation Guide for eFlow6NB, eFlow102NB, eFlow104NB and

Sub-Assembly Installation Guide for the following models: ACM4, ACM8, LINQ2, PDS8, VR6 for further

installation instructions.

5. Fasten snap on spacers onto metal pems configuration of backplane depending on the Mercury access controller

(Fig. 2-5, pg. 3-6).

6. Position Mercury access controller module over corresponding spacers and depress onto snap on spacers (Fig. 2-5, pg. 3-6).

7. Mount backplane to enclosure with hardware.

Fig. 1

Tamper Switch

(included)

To Access Control Panel or

UL Listed Reporting Device

Edge of

Enclosure

Trove2/Mercury Fused Kits Installation Guide - 3 -

T2MK3F4, T2MK3F4Q, T2MK3F8, T2MK3F8Q: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 2, pg. 3).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 2a, pg. 3).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 2

Altronix LINQ2 Module (T2MK3F4Q, T2MK3F8Q)

NC C NO NC C NO

AC FAIL BAT FAIL

TRIGGER

AC DCAC1

EOLNOGND

SUPERVISED RESET

+AUX-

- BAT +- DC +

L G N

OFF - 24V

ON - 12V

Altronix - eFlow6NB

Altronix ACM4

(T2MK3F4, T2MK3F4Q)

+ INP1 --

PWR1 +

OFF

IN1

IN2

Out1

<1 off 2>

PWR2 +PWR2 +

COM ---

+ INP2 --

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

3333 33

Out2

<1 off 2>

Out3

<1 off 2>

Out4

<1 off 2>

Out5

<1 off 2>

Out6

<1 off 2>

Out7

<1 off 2>

Out8

<1 off 2>

Altronix - PDS8

Altronix VR6 is mounted under PDS8

TRG

TRIGGER

INPUT

ACM4

ACCESS POWER

CONTROLLER

LED1 LED2 LED3 LED4

MAIN

OUTPUT 1

NC C NO COM NC C NO COM NC C NO COM NC C NO COM

OUTPUT 2 OUTPUT 3

IN GND

OUTPUT 4

-- +

CONTROL

-- +

POWER

+INP- T +RET-

INTERFACE

NO C NC

FACP

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix ACM8

(T2MK3F8, T2MK3F8Q)

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 2a

- 4 - Trove2/Mercury Fused Kits Installation Guide

T2MK7F8, T2MK7F8Q: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 3, pg. 4).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 3a, pg. 4).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 3

Altronix LINQ2 Module (T2MK3F8Q)

NC C NO NC C NO

AC FAIL BAT FAIL

TRIGGER

AC DCAC1

EOLNOGND

SUPERVISED RESET

+AUX-

- BAT +- DC +

L G N

OFF - 24V

ON - 12V

Altronix - eFlow104NB

+ INP1 --

PWR1 +

OFF

IN1

IN2

Out1

<1 off 2>

PWR2 +PWR2 +

COM ---

+ INP2 --

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

3333 33

Out2

<1 off 2>

Out3

<1 off 2>

Out4

<1 off 2>

Out5

<1 off 2>

Out6

<1 off 2>

Out7

<1 off 2>

Out8

<1 off 2>

Altronix - PDS8

Altronix VR6 is mounted under PDS8

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix - ACM8

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 3a

Trove2/Mercury Fused Kits Installation Guide - 5 -

T2MK75F16, T2MK75F16Q: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 4, pg. 5).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 4a, pg. 5).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 4

B A

Altronix LINQ2 Module (T2MK75F16Q, T2MK75F16DQ)

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix - ACM8

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix - ACM8

Altronix - eFlow104NB

– DC +– BAT +

L G N

NC C NO NC C NO

AC FAIL BAT FAIL

TRIGGER EOL

SUPERVISED

AC DCAC1 NO GND

RESET + AUX -

--- BAT +

Altronix - eFlow102NB

L G N

1 min enable

2 hr disable

--- DC +

Altronix - PD16W

XFMR INPUT SP

P N

1 2 3 4 5 6 7 89 10 11 12 13 14 15 16

PROTECTED

OUTPUTS

COMMON

OUTPUTS

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 4a

- 6 - Trove2/Mercury Fused Kits Installation Guide

T2MK77F16, T2MK77F16Q: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 5, pg. 6).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 5a, pg. 6).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 5

B A

Altronix LINQ2 Module (T2MK77F16Q, T2MK77F16DQ)

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix - ACM8

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix - ACM8

Altronix - eFlow104NB

– DC +– BAT +

L G N

Altronix - eFlow104NB

– DC +– BAT +

L G N

+ INP1 --

PWR1 +

OFF

IN1

IN2

Out1

<1 off 2>

PWR2 +PWR2 +

COM ---

+ INP2 --

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

3333 33

Out2

<1 off 2>

Out3

<1 off 2>

Out4

<1 off 2>

Out5

<1 off 2>

Out6

<1 off 2>

Out7

<1 off 2>

Out8

<1 off 2>

Altronix - PDS8

Altronix VR6 is mounted under PDS8

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 5a

Trove2/Mercury Fused Kits Installation Guide - 7 -

Snap on

Spacer

Nylon

Spacer

Sub-Assembly

Backplane

Pem

TMV2 (T2MK75F16, T2MK75F16Q, T2MK77F16, and T2MK77F16Q):

TMV2 accommodates a variety of Mercury boards with or without Altronix sub-assemblies for access systems.

Configuration of Mercury and/or Altronix Boards

Mercury Access Controllers:

1. Fasten spacers onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 6, pg. 7).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 6a, pg. 7).

3. Mount backplane to enclosure with hardware.

Altronix Sub-Assemblies and/or Adapters:

1. Fasten spacers to pems which match the hole pattern (C) for Altronix Sub-Assemblies (Fig. 6, 6a, pg. 7).

2. Mount boards to spacers utilizing pan head screws provided with the product (Fig. 6, pg. 7).

Access Controller Position Chart for the Following Models:

Mercury

Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

Altronix

Sub-Assembly or Adapter Pem Mounting

ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6, GB1 (Genetec Synergis Cloud Link adapter plate) C

Fig. 6

Fig. 6a

- 8 - Trove2/Mercury Fused Kits Installation Guide

Enclosure Dimensions (H x W x D approximate):

27.25” x 21.5” x 6.5” (692.2mm x 552.5mm x 165.1mm)

6.75” (171.5mm)8.25” (209.5mm)

8.00” (203.2mm)

2.00” (50.8mm)

1.25” (31.8mm)

5.25” (133.4mm) 5.25” (133.4mm)7.00” (177.8mm)

1.25” (31.8mm)

6.25” (158.8mm) 19.80” (502.9mm)

1.00” (25.4mm)

27” (685.8mm)

1.5”

(38.1mm)

2.00” (50.8mm) 2.00” (50.8mm)

3.5”(88.9mm) 3.5”(88.9mm)

21.50” (546.1mm)

5.25” (133.35mm) 5.25” (133.35mm)

6.25” (158.8mm)

1.25”

(31.8mm)

0.85” (21.6mm)

0.5625” (14.3mm)

2.415” (61.3mm)

0.685” (17.4mm)

1.77”

(45mm)

0.885” (22.5mm)

1.125” (28.3mm)

Knockouts

2.00” (50.8mm) 2.00” (50.8mm)

Altronix is not responsible for any typographical errors.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

web site: www.altronix.com | e-mail: [email protected] | Lifetime Warranty

IITrove2/Mercury Fused Kits I30U

MEMBER