Angler BB-26DSL Operating instructions

Brand
Angler
Model
BB-26DSL
Type
Operating instructions

Angler BB-26DSL is a versatile lighting tool that can be used to create a variety of lighting effects for photography and videography. With its large 26-inch octagonal shape, the BB-26DSL provides soft, even illumination that is flattering to subjects. The included diffuser can be used to further soften the light, while the optional deflector plate can be used to minimize the hot spot at the center of the box and create a more even spread of light. The BB-26DSL is also compatible with a variety of grids, which can be used to control the spread of light and create specific lighting effects.

Angler BB-26DSL is a versatile lighting tool that can be used to create a variety of lighting effects for photography and videography. With its large 26-inch octagonal shape, the BB-26DSL provides soft, even illumination that is flattering to subjects. The included diffuser can be used to further soften the light, while the optional deflector plate can be used to minimize the hot spot at the center of the box and create a more even spread of light. The BB-26DSL is also compatible with a variety of grids, which can be used to control the spread of light and create specific lighting effects.

INSTRUCTIONS
26 in. BoomBox for Flashes
BB-26DSL
2
Setting Up the BoomBox
1.
Place the stand mount onto a light stand’s
5/8-inch stud. Tighten the locking knob
until secure.
2. Press down the locking button, and swing
the mounting bracket into position until it
snaps into place.
3. Attach the BoomBox to the stand mount
by aligning the thumbscrew with one of
the mounting bracket holes. Tighten until
secure.
4. Open the BoomBox, and push the center
ring over the shaft until it’s it’s all the
way in, just like an umbrella. A slight
counterclockwise turn of the center ring
locks it into place.
5.
Optional: Attach the deflector plate
to the shaft with the thumbscrew. The
deflector plate minimizes the hot spot at
the center of the box and diuses the light
for beauty dish-style wraparound light.
Note: For a creative lighting option, the
deflector plate can also be mounted in reverse.
1
2
3
4
5
3
6. Optional: Attach the diuser by pressing
the touch-connect strips against the
inner rim of the BoomBox. The diuser
softens and spreads the light for an even
and flattering eect. It can be used with
or without the deflector plate.
7.
Loosen the tension knob, and slide your
flash’s foot into the cold shoe. Tighten the
tension knob until the flash is secure.
8.
Use the thumbscrews to adjust the height
of the BoomBox and the position of the
cold shoe.
Recommended Accessories
Angler Grid for the BB-26DSL BoomBox
• BB-G26
6
7
8
SPECIFICATIONS
Shape Octagonal
Compatibility Shoe-mount flashes
Removable Front Diffuser Yes
Accepts Grid Yes
Requires Speed Ring No, provided
Diameter 26 in. (66 cm)
Weight 2.7 lb. (1.2 kg)
One-Year Limited Warranty
This Angler product is warranted to the original purchaser to be free from defects in
materials and workmanship under normal consumer use for a period of one (1) year from
the original purchase date or thirty (30) days after replacement, whichever occurs later.
The warranty provider’s responsibility with respect to this limited warranty shall be limited
solely to repair or replacement, at the provider’s discretion, of any product that fails
during normal use of this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by the warranty provider. If the
product has been discontinued, the warranty provider reserves the right to replace it with
a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED
HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights,
and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Angler Customer Service Department to obtain
a return merchandise authorization (“RMA”) number, and return the defective product
to Angler along with the RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.anglerlights.com or call Customer
Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Angler is a registered trademark of the Gradus Group.
© 2018 Gradus Group LLC. All Rights Reserved.
ANGLER
A Gradus Group
Brand
GG1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Angler BB-26DSL Operating instructions

Brand
Angler
Model
BB-26DSL
Type
Operating instructions

Angler BB-26DSL is a versatile lighting tool that can be used to create a variety of lighting effects for photography and videography. With its large 26-inch octagonal shape, the BB-26DSL provides soft, even illumination that is flattering to subjects. The included diffuser can be used to further soften the light, while the optional deflector plate can be used to minimize the hot spot at the center of the box and create a more even spread of light. The BB-26DSL is also compatible with a variety of grids, which can be used to control the spread of light and create specific lighting effects.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents