INSTRUCTIONS
CatchLight Reflector
CL-24
2
Thank you for choosing Angler.
The Angler CatchLight is a unique, curved reflector that minimizes or
eliminates harsh shadows for a stunning, glowing eect that’s favored by
portrait, fashion, and beauty photographers. Placed beneath the chin level of
a subject, the reflected beam from a key light creates a seamless catchlight
that’s the same shape and contour of the subject’s iris. It also delivers a
clamshell lighting eect that accentuates beautiful skin tones and textures.
Precautions
Please read and follow these instructions, and keep this manual in a
safe place.
Keep this unit away from water and any flammable gases or liquids.
Clean the unit with only a soft, dry cloth.
Make sure this item is intact and that no parts are missing.
All images are for illustrative purposes only.
3
Tubes
Attachment
knobs
Silver
reflector
Rods
Tilt/swivel
bracket
Carrying
case
4
Assembling the CatchLight
1.
Loosen the locking knob on the
bracket, and place it on your light
stand’s 5/8-inch stud. Tighten the
locking knob until secure.
2.
Assemble the two tubes by fitting
the pieces together. Make sure the
locking buttons fit through the holes,
so the pieces are locked together.
3.
Thread the tubes through the
sleeves on the top and bottom of the
reflector.
4.
Place the assembly on the bracket
by aligning the holes at the center of
each tube with the mounting screws,
and securing them with the knobs.
5. Thread the rods through the sleeves,
and fit the ends of the rods through
the mounting holes of the tubes.
Secure the rods with the knobs.
1
2
3
4
5
5
6.
Adjust the swivel bracket to the
desired angle.
Note: Once the CatchLight is
assembled, the reflector should be taut.
Pro Tips
Clamshell Lighting Eect with the CatchLight
Clamshell lighting minimizes or eliminates harsh shadows and is often used
by professional fashion and beauty photographers for a glowing eect that
delivers glamorous portraits.
1.
Position your light approximately 2.5 to 3 feet from the subject, pointing
down at a 45°.
2. Place the center of the CatchLight the same distance from the subject,
and aim it so the subject has a curved catchlight that follows the curve
of their iris.
6
1 2
6
Specifications
Material
Reflective silver fabric
Aluminum tubes
metal rods and bracket
Dimensions (H × W × D)
24 × 58.5 × 13.5 in.
(61 × 148.6 × 34.3 cm)
Weight
5.5 lb. (2.5 kg)
7
One-Year Limited Warranty
This Angler product is warranted to the original purchaser to be free from defects in
materials and workmanship under normal consumer use for a period of one (1) year from
the original purchase date or thirty (30) days after replacement, whichever occurs later.
The warranty provider’s responsibility with respect to this limited warranty shall be limited
solely to repair or replacement, at the provider’s discretion, of any product that fails
during normal use of this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by the warranty provider. If the
product has been discontinued, the warranty provider reserves the right to replace it with
a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED
HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights,
and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Angler Customer Service Department to obtain
a return merchandise authorization (“RMA”) number, and return the defective product
to Angler along with the RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.anglerlights.com or call Customer
Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Angler is a registered trademark of the Gradus Group.
© 2018 Gradus Group LLC. All Rights Reserved.
ANGLER
A Gradus Group
Brand
GG1
/
