Impact MBM-1000 Magnetic Background Mount Operating instructions

Impact
Brand
Impact
Model
MBM-1000 Magnetic Background Mount
Type
Operating instructions

Impact MBM-1000 Magnetic Background Mount

The Impact MBM-1000 Magnetic Background Mount securely holds your backgrounds to the mounted wall plates with strong rare-earth magnets. You can use multiple background sizes on a configurable mount setup and switch between different colors, scenes, or sizes by just pulling the magnets off. The eight included metal plates can be configured on the wall to accommodate various sized backgrounds during your shoot.

Impact MBM-1000 Magnetic Background Mount

The Impact MBM-1000 Magnetic Background Mount securely holds your backgrounds to the mounted wall plates with strong rare-earth magnets. You can use multiple background sizes on a configurable mount setup and switch between different colors, scenes, or sizes by just pulling the magnets off. The eight included metal plates can be configured on the wall to accommodate various sized backgrounds during your shoot.

MBM-1000
Magnetic
Background Mount
INSTRUCTIONS
2
Introduction
Thank you for choosing Impact.
The Magnetic Background Mount system lets you use multiple
background sizes on a congurable mount setup. Strong rare-
earth magnets securely hold your backgrounds to the mounted
wall plates. When you need to change your background to
a different color, scene, or size, just pull the magnets off and
switch. Congure the eight included metal plates on the wall so
you can accommodate various sized backgrounds during your
shoot.
3
Precautions ⚠
Specications
• Securely mount the plate to the
wall before use.
• Make sure that this product
is intact and that there are no
missing parts.
• All images are for illustrative
purposes only.
Plate Dimensions 5.9 × 5.9 in.
(150 × 150 mm)
Weight Magnet: 3.7 oz. (104 g)
Plate: 12.2 oz. (346 g)
4
Overview
1. Mounting Plate (×8)
2. Magnet (×4)
3. Phillips Screw (×32)
4. Wall Anchors (×32)
Tools Needed
• Phillips Screwdriver
• Hammer
• Power Drill
• Wood Drill Bit
4
1
2 3
10 ft.
9 ft.
5 ft.
7 ft.
9 ft.
5
Setup
Positioning the Wall Plates
Congure the wall plates so you can easily switch between various background
widths like 5, 7, and 9 ft., all on the same wall. The image below is an example of
a conguration, but you should set up the wall plates to best t your needs.
6
Attaching the Wall Plates
1. Use the wall plate to mark the
position of the mounting holes on
the wall.
2. Drill holes in the marked locations.
Make appropriately sized holes for
the wall anchors. Tap the anchors
into the holes.
3. Put the plate against the wall,
and insert the screws through the
holes. Screw them in until they’re fully tightened, and the plate is secured.
Note: When screwing the plate
directly into a wall stud, make sure
at least two screws are attached
to the stud.
4. Repeat for the other plates.
7
Hanging the Background
Use the magnets to attach your background to the wall plates. Use one magnet
per plate.
One-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from defects in materials
and workmanship under normal consumer use for a period of one (1) year from the original
purchase date or thirty (30) days after replacement, whichever occurs later. The warranty
provider’s responsibility with respect to this limited warranty shall be limited solely to repair
or replacement, at the provider’s discretion, of any product that fails during normal use of this
product in its intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specic legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain
a return merchandise authorization (“RMA”) number, and return the defective product to
Impact along with the RMA number and proof of purchase. Shipment of the defective product
is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call
Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Impact is a registered trademark of the Gradus Group.
© 2022 Gradus Group LLC. All Rights Reserved.
GG1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Impact MBM-1000 Magnetic Background Mount Operating instructions

Impact
Brand
Impact
Model
MBM-1000 Magnetic Background Mount
Type
Operating instructions

Impact MBM-1000 Magnetic Background Mount

The Impact MBM-1000 Magnetic Background Mount securely holds your backgrounds to the mounted wall plates with strong rare-earth magnets. You can use multiple background sizes on a configurable mount setup and switch between different colors, scenes, or sizes by just pulling the magnets off. The eight included metal plates can be configured on the wall to accommodate various sized backgrounds during your shoot.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents