Insignia NS-DUBR1S Quick setup guide

Brand: Insignia

Model: NS-DUBR1S

Type: Quick setup guide

6' 3-Section

Light Stand

NS-DLS75SBK (NOT INCLUDED)

Quick Start Guide

NS-DUBR1S

Umbrella Bracket with Flash Mount

Before using your new product, please read these instructions to prevent any damage.

PACKAGE CONTENTS

• Umbrella Bracket with ash mount

• Dual-threaded 1/4" and 3/8" stud

• Quick Start Guide

FEATURES

• Tilt and swivel action adjusts to your lighting needs

• Adjustable locking clamp ts most hot-shoe mount ashes

• Umbrella receptacle with locking knob holds equipment

securely

• Durable metal construction for a rm hold

PRODUCT OVERVIEW

# ITEM

1 Cold Shoe Flash

Mount

2 Screw Lock

3 Umbrella Socket

4 Locking screw

5 Thumb Screw Lock

6 Tension screw

7 Adapter stud

DESCRIPTION

To mount a ash on the

bracket.

Tighten to secure the

umbrella shaft to the

bracket.

Hole for an umbrella

shaft.

Tighten to secure the

bracket to the tripod or

stand.

Tighten to secure a ash

to the bracket.

Loosen to tilt the

bracket. Tighten to

secure in place.

For 3/8” and 1/4-20”

thread mounting on a

tripod or stand.

• Reversible 1/4“ and 3/8” threaded female stud for tripod or

light stand attachment

• Umbrella Bracket works well with:

Dual Layer

Convertible Umbrella

NS-DU33DL (NOT INCLUDED)

Final size (W×H): 304.8 × 76.2 mm

Fold size (W×H): 101.6 × 76.2 mm

NS-DUBR1S_15-0323_QSG_V1_EN_Final.ai 1 4/8/2015 3:19:36 PMNS-DUBR1S_15-0323_QSG_V1_EN_Final.ai 1 4/8/2015 3:19:36 PM

Locking screw

V1 English 15-0323

USING YOUR UMBRELLA

BRACKET WITH FLASH MOUNT

1 Loosen the locking screw.

2 Install the bracket on the top of your

Light Stand

Install the adapter stud on your

tripod or stand and install the

bracket on the adapter stud as

shown (required on most stands or

tripods).

3 Tighten the locking screw to secure

the bracket.

Adapter stud

4 Place your photo ash in the cold shoe ash mount on the top

of the bracket. Tighten the thumb screw lock to secure it.

5 Insert the base of your umbrella into the umbrella socket, then

tighten the screw lock to secure it. Point the ash at the center

of the umbrella.

6 Loosen the tension screw, adjust the tilt, then tighten the

screw to secure the bracket. Then aim for best lighting.

SPECIFICATIONS

• Warranty: 12 months parts & labor

• Dimensions (L x W x H): 3.3 x 1.1 x 4.1 in. (8.3 x 2.7 x 10.5 cm)

• Net weight: .37 lbs (0.17 kg)

CONTACT INSIGNIA:

For customer service, call 1-877-467-4289 (U.S. and Canada) or

01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated companies.

Registered in some countries.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

Made in China

Cold Shoe Flash Mount

Thumb Screw Lock

Screw Lock

NS-DUBR1S_15-0323_QSG_V1_EN_Final.ai 2 4/8/2015 3:19:36 PMNS-DUBR1S_15-0323_QSG_V1_EN_Final.ai 2 4/8/2015 3:19:36 PM

Insignia NS-DUBR1S Quick setup guide

Insignia NS-DUBR1S Quick setup guide

Insignia NS-DUBR1S Quick setup guide

Related papers

Other documents