2. Belmont
  3. B50 Standard J-Box

Belmont B50 Standard J-Box Template

  • Hello! I've reviewed the Utility Center Floor Template document, which provides detailed instructions for installing utilities for models BDS-2500, BDS-2505, BDS-2510, BDS-2515, BDS-2520, BDS-2570, BDS-2575, BDS-0020, and BDS-0050. This document outlines precise dimensions for placement of electrical, telecommunications, drain, vacuum, water, and air connections, and I'm here to assist with any questions you may have about the installation process or specifications.
  • What kind of professionals are required to install utilities?
    What should be considered while installing the plumbing?
    How should gravity drain be installed?
2-1/4”
5”
5-3/4”
6-1/4”
14-1/2”
2-3/4”
6-3/4”
7-1/4”
1-1/2”
6”
Electrical Conduit
for Quad Box
(1/2” O.D.)
Electrical Conduit
for Quad Box
(1/2” O.D.)
Finished Floor
Telecommunications
(1-1/2” Nominal Pipe)
Transformer Space
Telecommunications
(1-1/2” Nominal Pipe)
Gravity Drain
(1-1/2” Nominal Pipe)
Gravity Drain (1-1/2” Nominal Pipe)
Central Vacuum
(5/8” O.D. Tube)
Central Vacuum (5/8” O.D. Tube)
Water
(1/2” Threaded Pipe)
Water (1/2” Threaded Pipe)
Air
(1/2” Threaded Pipe)
Air (1/2” Threaded Pipe)
3-1/4”
5-3/4”
9-3/4”
12”
14-1/2”
7-1/4”
6-1/2”
Umbilical Connection
Bracket
Utility Center
Frame
1”
Notes :
(1) Local regulations provide that licensed plumbers+ electricians shall install utilities.
(2) Make sure all plumbing conforms to prevailing local codes.
(3) Plumbing central vacuum to the utility center should be specified by the central vacuum sup-
plier and terminated in utility center with 5/8" O.D. tube perpendicular to the floor.
(4) Gravity drain has 1-1/2" nominal pipe protruding 1" from finished floor.
Note : Contractor to supply and place trap in line to conform with local codes.
(5) Electrical contractor to supply quad electrical outlet box.
X-Calibur Delivery System
Model : BDS-2500/2505/2510/2515/2520/
2570/2575/0020/0050
Utility Center Floor Template
1-800-223-1192 TEMPL020 Rev 083010
/