Getting Started
Phone Programming
Within 24 hours of enabling security, you will
receive an alert notification containing your
Personal Telephone Number (PTN), Nextel
Customer Care number, Direct Connect number,
and Talkgroup lists for Group Connect calls.
1 When you receive an alert notification saying
New Browser Message - Receive
Programming Info, press A under Goto.
2 You are prompted to accept changes to your
lists. Press A under Ok.
3 You are prompted again to accept changes to
your lists. Press A under Ok.
4 A confirmation screen displays. Press A under
Ok.
5 Press e to return to the idle screen.
Finding Your Phone Number
and Direct Connect
®
Number
My Info lets you view your phone number, Direct
Connect number, and other phone information.
1 Press m to access the main menu.
2 Scroll to My Info.
3 Press O.
4 Scroll to see your information:
•Name — Enter your name.
•Line1 and Line 2 — your phone numbers for
phone lines 1 and 2. These are filled in when
you receive your alert notification after
enabling security on your phone.
•Direct Connect — Your Direct Connect
number is the number that others use to
contact you using Direct Connect
®
service. It
is filled in when you receive your alert
notification after enabling security on your
phone. To view your Direct Connect number,
scroll to Direct Connect and press O.
• Group ID — the number of the Talkgroup you
have joined.
• Carrier IP — the IP address assigned to
Nextel. It is filled in when you register for
packet data services. To view your Carrier IP
address, scroll to Carrier IP and press O.
• IP1 Address and IP2 Address — the IP
addresses assigned to you for using the
Internet with your phone. To view your IP
addresses, scroll to the IP address you want
to view and press O.
•Ckt — Your circuit data number is the number
you use if you want to use your phone to
transfer circuit data. You receive this number
from Nextel.