LS-3100-16TP-EI-H3-A-O

H3C LS-3100-16TP-EI-H3-A-O Installation guide

  • Hello! I am an AI chatbot trained to assist you with the H3C LS-3100-16TP-EI-H3-A-O Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
H3C S3100 Series Ethernet Switches
Installation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: 20080115-C-1.04
Copyright © 2007-2008, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H
3
Care,
, TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V
2
G, V
n
G, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www. h3c.com
Technical Support
customer_service@h3c.com
http://www. h3c.com
About This Manual
Related Documentation
In addition to this manual, each H3C S3100 Series Ethernet Switches documentation
set includes the following:
Manual Description
H3C S3100 Series Ethernet Switches
Operation Manual
It is used for assisting the users in data
configurations and typical applications.
H3C S3100 Series Ethernet Switches
Command Manual
It is used for assisting the users in using
various commands.
Organization
H3C S3100 Series Ethernet Switches Installation Manual is organized as follows:
Chapter Contents
1 Product Introduction
Introduces the characteristics and
technical specifications of S3100 Series
Ethernet Switches.
2 Installation Preparation
Introduces the installation preparation
and precaution of S3100 Series
Ethernet Switches.
3 Installation
Introduces the procedures to install an
S3100 Series Ethernet Switch, including
the setup of the mainframe, cards and
cables.
4 First Power-on
Introduces the booting process of an
S3100 Series Ethernet Switch, including
the power-on booting of the switch and
the system initialization.
5 Boot ROM and Host Software Loading
Introduces how to load Boot ROM and
host software for an S3100 Series
Ethernet Switch.
6 Maintenance and Troubleshooting
Introduces the problems that might
occur during the installation and the
booting of an S3100 Series Ethernet
Switch and the related solution.
Chapter Contents
7 Appendix Lightning Protection of the
Switch
Introduces lightning protection of S3100
Series Ethernet Switches.
Conventions
The manual uses the following conventions:
I. GUI conventions
Convention Description
< >
Button names are inside angle brackets. For example, click
<OK>.
[ ]
Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
/
Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].
II. Symbols
Convention Description
Warning
Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution
Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.
Environmental Protection
This product has been designed to comply with the requirements on environmental
protection. For the proper storage, use and disposal of this product, national laws and
regulations must be observed.
Installation Manual
H3C S3100 Series Ethernet Switches Table of Contents
i
Table of Contents
Chapter 1 Product Introduction...................................................................................................1-1
1.1 Overview............................................................................................................................1-1
1.1.1 S3100-SI Series Ethernet Switches........................................................................1-1
1.1.2 S3100-EI Series Ethernet Switches........................................................................1-2
1.2 Introduction to S3100-SI Series Ethernet Switches...........................................................1-3
1.2.1 S3100-26T-SI..........................................................................................................1-3
1.2.2 S3100-16T-SI..........................................................................................................1-4
1.2.3 S3100-8T-SI............................................................................................................1-5
1.2.4 S3100-26C-SI..........................................................................................................1-7
1.2.5 S3100-16C-SI..........................................................................................................1-8
1.2.6 S3100-8C-SI..........................................................................................................1-10
1.3 Introduction to S3100-EI Series Ethernet Switches.........................................................1-11
1.3.1 S3100-26TP-EI......................................................................................................1-11
1.3.2 S3100-16TP-EI......................................................................................................1-13
1.3.3 S3100-8TP-EI........................................................................................................1-14
1.3.4 S3100-26TP-PWR-EI............................................................................................1-16
1.3.5 S3100-16TP-PWR-EI............................................................................................1-18
1.3.6 S3100-8TP-PWR-EI..............................................................................................1-20
1.3.7 S3100-26C-EPON-EI............................................................................................1-21
1.3.8 S3100-16C-EPON-EI............................................................................................1-23
1.3.9 S3100-8C-EPON-EI..............................................................................................1-24
1.4 Introduction to Front Panel LEDs.....................................................................................1-25
1.4.1 Front Panel LEDs of the S3100-SI/S3100-TP-PWR-EI/S3100-C-EPON-EI Series1-25
1.4.2 Front Panel LEDs of the S3100-TP-EI Series.......................................................1-27
1.5 Technical Specifications ..................................................................................................1-28
1.5.1 S3100-SI Series Ethernet Switch..........................................................................1-28
1.5.2 S3100-EI Series Ethernet Switch..........................................................................1-31
1.6 SFP Modules Supported by S3100-EI Ethernet Switches ..............................................1-34
1.7 ONU Modules ..................................................................................................................1-34
Chapter 2 Installation Preparation...............................................................................................2-1
2.1 Precautions........................................................................................................................2-1
2.2 Requirements on Environment..........................................................................................2-1
2.2.1 Temperature/Humidity Requirements.....................................................................2-1
2.2.2 Cleanness Requirements........................................................................................ 2-2
2.2.3 Anti-interference Requirements ..............................................................................2-3
2.2.4 Laser Usage Security..............................................................................................2-3
2.3 Installation Tools................................................................................................................2-3
Installation Manual
H3C S3100 Series Ethernet Switches Table of Contents
ii
Chapter 3 Installation....................................................................................................................3-1
3.1 Installing a Switch..............................................................................................................3-1
3.1.1 Cabinet Mounting....................................................................................................3-1
3.1.2 Desk Mounting ......................................................................................................3-11
3.1.3 Wall Mounting........................................................................................................3-11
3.1.4 Magnet Mounting...................................................................................................3-13
3.2 Installing an Expansion Interface Module........................................................................3-15
3.3 Connection of Power Cable and Grounding Cable..........................................................3-16
3.3.1 Connecting AC Power Cable ................................................................................3-16
3.3.2 Connecting DC Power Cable................................................................................3-18
3.3.3 Connecting Grounding Cable................................................................................3-21
3.4 Connecting Optical Fiber.................................................................................................3-23
3.5 Connection of Console Cable..........................................................................................3-23
3.5.1 Console Cable.......................................................................................................3-23
3.5.2 Connecting Console Cable ...................................................................................3-24
3.6 Installation Verification.....................................................................................................3-25
Chapter 4 First Power-on..............................................................................................................4-1
4.1 Establishing Configuration Environment............................................................................4-1
4.2 Connecting the Console Cable..........................................................................................4-1
4.3 Setting Terminal Parameters.............................................................................................4-1
4.4 Booting Switch...................................................................................................................4-4
4.4.1 Checking Before Powering on the Switch...............................................................4-4
4.4.2 Powering on the Switch...........................................................................................4-4
4.4.3 Changing the Startup Mode....................................................................................4-6
Chapter 5 Boot ROM and Host Software Loading ..................................................................... 5-1
5.1 Introduction to Loading Approaches..................................................................................5-1
5.2 Local Software Loading.....................................................................................................5-1
5.2.1 Boot Menu...............................................................................................................5-2
5.2.2 Loading Software Using XModem Through Console Port......................................5-3
5.2.3 Loading Software Using TFTP Through Ethernet Port...........................................5-8
5.2.4 Loading Software Using FTP Through Ethernet Port............................................. 5-9
5.3 Remote Software Loading...............................................................................................5-11
5.3.1 Remote Loading Using FTP..................................................................................5-11
5.3.2 Remote Loading Using TFTP................................................................................5-13
Chapter 6 Maintenance and Troubleshooting............................................................................ 6-1
6.1 Software Loading Failure...................................................................................................6-1
6.2 Missing Password..............................................................................................................6-1
6.2.1 Missing user password............................................................................................6-1
6.2.2 Missing Boot ROM Password .................................................................................6-2
6.3 Power System Failure........................................................................................................6-2
6.4 Configuration System Failure ............................................................................................6-2
Installation Manual
H3C S3100 Series Ethernet Switches Table of Contents
iii
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-1
Chapter 1 Product Introduction
1.1 Overview
The H3C S3100 Series Ethernet Switches are high-performance, high-density,
easy-to-install, NMS-manageable intelligent Ethernet switches which support
wire-speed Layer 2 switching.
Table 1-1 lists the models of the H3C S3100 Series Ethernet Switches.
Table 1-1 Models of the H3C S3100 Series Ethernet Switches
Name Subseries Model
S3100-C-SI
z S3100-8C-SI
z S3100-16C-SI
z S3100-26C-SI
S3100-SI
S3100-T-SI
z S3100-8T-SI
z S3100-16T-SI
z S3100-26T-SI
S3100-TP-EI
z S3100-8TP-EI
z S3100-16TP-EI
z S3100-26TP-EI
S3100-TP-PWR-EI
z S3100-8TP-PWR-EI
z S3100-16TP-PWR-EI
z S3100-26TP-PWR-EI
H3C S3100
Series
Ethernet
Switches
S3100-EI
S3100-C-EPON-EI
z S3100-8C-EPON-EI
z S3100-16C-EPON-EI
z S3100-26C-EPON-EI
1.1.1 S3100-SI Series Ethernet Switches
Currently, the S3100-SI Series Ethernet Switches include the S3100-T-SI and the
S3100-C-SI, as listed in
Table 1-2 and Table 1-3.
Table 1-2 H3C S3100-T-SI Series Ethernet Switches
Model
Power
input
Number of
10/100 Mbps
electrical ports
Number of
gigabit uplink
ports
Number of
console
ports
S3100-26T-SI 24 Two Ethernet ports
S3100-16T-SI 16
S3100-8T-SI
AC
8
One Ethernet port
1
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-2
Table 1-3 H3C S3100-C-SI Series Ethernet Switches
Model Power input
Number of
10/100 Mbps
electrical ports
Number of
expansion
slots
Number of
console
ports
S3100-26C-SI 24 2
S3100-16C-SI 16 2
S3100-8C-SI
AC input for
AC-powered
switches.
DC input for
DC-powered
switches
8 1
1
1.1.2 S3100-EI Series Ethernet Switches
Currently, the H3C S3100-EI Series Ethernet Switches include the S3100-TP-EI, the
S3100-TP-PWR-EI and the S3100-C-EPON-EI, as listed in
Table 1-4 and Table 1-5.
Table 1-4 Models of the H3C S3100-TP-EI and S3100-TP-PWR-EI Series Ethernet
Switches
Model Power input
Number of
10/100 Mbps
electrical
ports
Number of 1000
Mbps uplink
ports
Number of
console
ports
S3100-26TP-
EI
24
Two Combo
ports
1
S3100-16TP-
EI
16
Two Combo
ports
1
S3100-8TP-EI
AC input for
AC-powered
switches
DC input for
DC-powered
switches
8 One Combo port 1
S3100-26TP-
PWR-EI
AC or RPS DC
input
24
Two Combo
ports
1
S3100-16TP-
PWR-EI
16
Two Combo
ports
1
S3100-8TP-P
WR-EI
AC input
8 One Combo port 1
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-3
Table 1-5 Models of the H3C S3100-C-EPON-EI Series Ethernet Switches
Model
Power
input
Number
of 10/100
Mbps
electrical
ports
Number of
1000 Mbps
uplink
PON ports
Number of
expansion
slots
Number
of
console
ports
S3100-26C-EPON-EI 24 1 1
S3100-16C-EPON-EI 16 1 Disabled
S3100-8C-EPON-EI
AC
input
8 1
1
1.2 Introduction to S3100-SI Series Ethernet Switches
1.2.1 S3100-26T-SI
I. Front panel
S3100-26T-SI Ethernet switches each provide twenty-four auto-sensing
10/100Base-TX Ethernet ports, two 10/100/1000Base-T Ethernet ports, and one
console port.
Figure 1-1 shows the front panel of an S3100-26T-SI Ethernet switch.
(1) Power LED (2) A/L LED
(3) D/S LED (4) Port status LED, left (yellow)
(5) Port status LED, right (green) (6) 10/100 Base-TX port
(7) 10/100/1000 Base-T port (8) Console port
(9) LINK LED (green) (10) ACT LED (yellow)
(11) Mode button
Figure 1-1 Front panel of an S3100-26T-SI Ethernet switch
Note:
For details about LEDs on the front panel, refer to section 1.4.1 “Front Panel LEDs of
the S3100-SI/S3100-TP-PWR-EI/S3100-C-EPON-EI Series”.
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-4
II. Rear panel
Figure 1-2 shows the rear panel of an S3100-26T-SI Ethernet switch.
(1) AC power socket (2) Grounding screw
Figure 1-2 Rear panel of an S3100-26T-SI Ethernet switch
III. Power system
S3100-26T-SI Ethernet switches support AC input.
z Rated voltage range: 100 VAC to 240 VAC, 50 Hz/60 Hz
z Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 Hz
IV. Cooling system
The S3100-26T-SI cools off naturally.
1.2.2 S3100-16T-SI
I. Front panel
S3100-16T-SI Ethernet switches each provide sixteen auto-sensing 10/100Base-TX
Ethernet ports, one 10/100/1000Base-T Ethernet port, and one console port.
Figure 1-3 shows the front panel of an S3100-16T-SI Ethernet switch.
(1) Power LED (2) A/L LED
(3) D/S LED (4) Port status LED, left (yellow)
(5) Port status LED, right (green) (6) 10/100 Base-TX port
(7) 10/100/1000 Base-T port (8) Console port
(9) LINK LED (green) (10) ACT LED (yellow)
(11) Mode button
Figure 1-3 Front panel of an S3100-16T-SI Ethernet switch
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-5
Note:
For details about LEDs on the front panel, refer to section 1.4.1 “Front Panel LEDs of
the S3100-SI/S3100-TP-PWR-EI/S3100-C-EPON-EI Series”.
II. Rear panel
Figure 1-4 shows the rear panel of an S3100-16T-SI Ethernet switch.
(1) AC power socket (2) Grounding screw
Figure 1-4 Rear panel of an S3100-16T-SI Ethernet switch
III. Power system
S3100-16T-SI Ethernet switches support AC input.
z Rated voltage range: 100 VAC to 240 VAC, 50 Hz/60 Hz
z Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 Hz
IV. Cooling system
The S3100-16T-SI cools off naturally.
1.2.3 S3100-8T-SI
I. Front panel
S3100-8T-SI Ethernet switches each provide eight auto-sensing 10/100Base-TX
Ethernet ports, one 10/100/1000Base-T Ethernet port, and one console port.
Figure 1-5 shows the front panel of an S3100-8T-SI Ethernet switch.
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-6
(1) Power LED (2) A/L LED
(3) D/S LED (4) Port status LED, left (yellow)
(5) Port status LED, right (green) (6) 10/100 Base-TX port
(7) 10/100/1000 Base-T port (8) Console port
(9) LINK LED (green) (10) ACT LED (yellow)
(11) Mode button
Figure 1-5 Front panel of an S3100-8T-SI Ethernet switch
Note:
For details about LEDs on the front panel, refer to section 1.4.1 “Front Panel LEDs of
the S3100-SI/S3100-TP-PWR-EI/S3100-C-EPON-EI Series”.
II. Rear panel
Figure 1-6 shows the rear panel of an S3100-8T-SI Ethernet switch.
(1) AC power socket (2) Grounding screw
Figure 1-6 Rear panel of an S3100-8T-SI Ethernet switch
III. Power system
S3100-8T-SI Ethernet switches support AC input.
z Rated voltage range: 100 VAC to 240 VAC, 50 Hz/60 Hz
z Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 Hz
IV. Cooling system
The S3100-8T-SI cools off naturally.
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-7
1.2.4 S3100-26C-SI
Both AC-powered switches and DC-powered switches are available to this model.
I. Front panel
S3100-26C-SI Ethernet switches each provide twenty-four auto-sensing
10/100Base-TX Ethernet ports, two expansion slots, and one console port.
S3100-26C-SI Ethernet switches have the same front panel, as shown in
Figure 1-7.
(1) Power LED (2) A/L LED
(3) D/S LED (4) Port status LED, left (yellow)
(5) Port status LED, right (green) (6) 10/100Base- TX port
(7) Expansion slot (8) Console port
(9) Mode button
Figure 1-7 Front panel of an S3100-26C-SI Ethernet switch
Note:
z With a PoE card inserted in one expansion slot, an S3100-26C-SI Ethernet switch
will be a powered device (PD). In this case, the other expansion slot becomes
unavailable.
z For details about LEDs on the front panel, refer to section 1.4.1 “Front Panel LEDs
of the S3100-SI/S3100-TP-PWR-EI/S3100-C-EPON-EI Series”.
II. Rear panel
Figure 1-8 shows the rear panel of an S3100-26C-SI AC-powered Ethernet switch.
(1) AC power socket (2) Grounding screw
Figure 1-8 Rear panel of an S3100-26C-SI AC-powered Ethernet switch
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-8
Figure 1-9 shows the rear panel of an S3100-26C-SI DC-powered Ethernet switch.
(1) DC input terminal block (2) Grounding screw
Figure 1-9 Rear panel of an S3100-26C-SI DC-powered Ethernet switch
III. Power system
1) S3100-26C-SI AC-powered Ethernet switches:
z Rated voltage range: 100 VAC to 240 VAC, 50 Hz/60 Hz
z Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 Hz
2) S3100-26C-SI DC-powered Ethernet switches:
z Rated voltage range: –48 VDC to –60 VDC
z Input voltage range: –36 VDC to –72 VDC
IV. Cooling system
The S3100-26C-SI cools off naturally.
1.2.5 S3100-16C-SI
Both AC-powered switches and DC-powered switches are available to this model.
I. Front panel
S3100-16C-SI Ethernet switches each provide sixteen auto-sensing 10/100Base-TX
Ethernet ports, two expansion slots, and one console port.
S3100-16C-SI Ethernet switches have the same front panel, as shown in
Figure 1-10.
(1) Power LED (2) A/L LED
(3) D/S LED (4) Port status LED, left (yellow)
(5) Port status LED, right (green) (6) 10/100Base- TX port
(7) Expansion slot (8) Console port
(9) Mode button
Figure 1-10 Front panel of an S3100-16C-SI Ethernet switch
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-9
Note:
z With a PoE card inserted in one expansion slot, an S3100-16C-SI Ethernet switch
will be a powered device (PD). In this case, the other expansion slot becomes
unavailable.
z For details about LEDs on the front panel, refer to section 1.4.1 “Front Panel LEDs
of the S3100-SI/S3100-TP-PWR-EI/S3100-C-EPON-EI Series”.
II. Rear panel
Figure 1-11 shows the rear panel of an S3100-16C-SI AC-powered Ethernet switch.
(1) AC power socket (2) Grounding screw
Figure 1-11 Rear panel of an S3100-16C-SI AC-powered Ethernet switch
Figure 1-12 shows the rear panel of an S3100-16C-SI DC-powered Ethernet switch.
(1) DC input terminal block (2) Grounding screw
Figure 1-12 Rear panel of an S3100-16C-SI DC-powered Ethernet switch
III. Power system
1) S3100-16C-SI AC-powered Ethernet switches:
z Rated voltage range: 100 VAC to 240 VAC, 50 Hz/60 Hz
z Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 Hz
2) S3100-16C-SI DC-powered Ethernet switches:
z Rated voltage range: –48 VDC to –60 VDC
z Input voltage range: –36 VDC to –72 VDC
IV. Cooling system
The S3100-16C-SI cools off naturally.
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-10
1.2.6 S3100-8C-SI
Both AC-powered switches and DC-powered switches are available to this model.
I. Front panel
S3100-8C-SI Ethernet switches each provide eight auto-sensing 10/100Base-TX
Ethernet ports, one expansion slot, and one console port.
S3100-8C-SI Ethernet switches have the same front panel, as shown in
Figure 1-13.
(1) Power LED (2) A/L LED
(3) D/S LED (4) Port status LED, left (yellow)
(5) Port status LED, right (green) (6) 10/100Base- TX port
(7) Expansion slot (8) Console port
(9) Mode button
Figure 1-13 Front panel of an S3100-8C-SI Ethernet switch
Note:
For details about LEDs on the front panel, refer to section 1.4.1 “Front Panel LEDs of
the S3100-SI/S3100-TP-PWR-EI/S3100-C-EPON-EI Series”.
II. Rear panel
Figure 1-14 shows the rear panel of an S3100-8C-SI AC-powered Ethernet switch.
(1) AC power socket (2) Grounding screw
Figure 1-14 Rear panel of an S3100-8C-SI AC-powered Ethernet switch
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-11
Figure 1-15 shows the rear panel of an S3100-8C-SI DC-powered Ethernet switch.
(1) DC input terminal block (2) Grounding screw
Figure 1-15 Rear panel of an S3100-8C-SI DC-powered Ethernet switch
III. Power system
1) S3100-8C-SI AC-powered Ethernet switches:
z Rated voltage range: 100 VAC to 240 VAC, 50 Hz/60 Hz
z Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 Hz
2) S3100-8C-SI DC-powered Ethernet switches:
z Rated voltage range: –48 VDC to –60 VDC
z Input voltage range: –36 VDC to –72 VDC
IV. Cooling system
The S3100-8C-SI cools off naturally.
1.3 Introduction to S3100-EI Series Ethernet Switches
1.3.1 S3100-26TP-EI
Both AC-powered switches and DC-powered switches are available to this model.
I. Front panel
S3100-26TP-EI Ethernet switches each provide twenty-four auto-sensing
10/100Base-TX Ethernet ports, two auto-sensing 10/100/1000Base-T Ethernet ports,
two 100/1000Base-X SFP ports, and one console port. Each SFP port and the
corresponding auto-sensing 10/100/1000Base- T Ethernet port form a Combo port. For
each Combo port, either the SFP port or the corresponding 10/100/1000Base- T
Ethernet port can be used at a time.
S3100-26TP-EI Ethernet switches have the same front panel, as shown in
Figure 1-16.
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-12
(1) (
2
) (4)
(5)
(6)
(7)(8)
(3)
(7)
(1) Auto-sensing 10/100Base-TX port Speed LED (green)
(2) Auto-sensing 10/100Base-TX port (3) Combo port Speed LED (green)
(4) Auto-sensing 10/100/1000Base-T port (5) Console port
(6) 100/1000Base-X SFP port (7) LINK/ACT LED (green)
(8) Power LED (PWR)
Figure 1-16 Front panel of an S3100-26TP-EI Ethernet switch
Note:
For details about LEDs on the front panel, refer to section 1.4.2 Front Panel LEDs of
the S3100-TP-EI Series .
II. Rear panel
Figure 1-17 shows the rear panel of an S3100-26TP-EI AC-powered Ethernet switch.
(1) (2)
(1) Grounding screw (2) AC input terminal block
Figure 1-17 Rear panel of an S3100-26TP-EI AC-powered Ethernet switch
Figure 1-18 shows the rear panel of an S3100-26TP-EI DC-powered Ethernet switch.
(1) (2)
(1) Grounding screw (2) DC input terminal block
Figure 1-18 Rear panel of an S3100-26TP-EI DC-powered Ethernet switch
III. Power system
1) S3100-26TP-EI AC-powered Ethernet switches:
Installation Manual
H3C S3100 Series Ethernet Switches Chapter 1 Product Introduction
1-13
z Rated voltage range: 100 VAC to 240 VAC, 50 Hz/60 Hz
z Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 Hz
2) S3100-26TP-EI DC-powered Ethernet switches:
z Rated voltage range: –48 VDC to –60 VDC
z Input voltage range: –36 VDC to –72 VDC
IV. Cooling system
The S3100-26TP-EI cools off naturally.
1.3.2 S3100-16TP-EI
Both AC-powered switches and DC-powered switches are available to this model.
I. Front panel
S3100-16TP-EI Ethernet switches each provide sixteen auto-sensing 10/100Base-TX
Ethernet ports, two auto-sensing 10/100/1000Base-T Ethernet ports, two
100/1000Base-X SFP ports, and one console port. Each SFP port and the
corresponding auto-sensing 10/100/1000Base- T Ethernet port form a Combo port. For
each Combo port, either the SFP port or the corresponding 10/100/1000Base- T
Ethernet port can be used at a time.
S3100-16TP-EI Ethernet switches have the same front panel, as shown in
Figure 1-19.
(
1
)
(
2
)
(4)
(5)
(6)
(7)
(8)
(3)
(7)
(1) Auto-sensing 10/100Base-TX port Speed LED (green)
(2) Auto-sensing 10/100Base-TX port (3) Combo port Speed LED (green)
(4) Auto-sensing 10/100/1000Base-T port (5) Console port
(6) 100/1000Base-X SFP port (7) LINK/ACT LED (green)
(8) Power LED (PWR)
Figure 1-19 Front panel of an S3100-16TP-EI Ethernet switch
Note:
For details about LEDs on the front panel, refer to section 1.4.2 Front Panel LEDs of
the S3100-TP-EI Series
/