Aleratec 350132 Quick start guide

Aleratec
Brand
Aleratec
Model
350132
Category
HDD/SSD enclosures
Type
Quick start guide

This manual is also suitable for

Aleratec 350132 is a high-speed HDD copy cruiser that can duplicate or sanitize up to 16 IDE or SATA hard disk drives simultaneously. It features copy rates of up to 120 MB/s and supports 3.5" IDE HDDs and 3.5"/2.5" SATA HDDs.

With its third-party certified 7-Pass wipe sanitization function, Secure Erase, 1-Pass or 3-Pass with Verify, you can securely erase data from your hard drives, ensuring that your sensitive data is protected against unauthorized access.

The intuitive LED indicators on each HDD bay provide visual confirmation of successful completion for each hard drive, making it easy to monitor the progress of your duplication or sanitization tasks.

Aleratec 350132 is a high-speed HDD copy cruiser that can duplicate or sanitize up to 16 IDE or SATA hard disk drives simultaneously. It features copy rates of up to 120 MB/s and supports 3.5" IDE HDDs and 3.5"/2.5" SATA HDDs.

With its third-party certified 7-Pass wipe sanitization function, Secure Erase, 1-Pass or 3-Pass with Verify, you can securely erase data from your hard drives, ensuring that your sensitive data is protected against unauthorized access.

The intuitive LED indicators on each HDD bay provide visual confirmation of successful completion for each hard drive, making it easy to monitor the progress of your duplication or sanitization tasks.

Quick Start Guide
Welcome!
Congratulations on your purchase of an Aleratec
HDD Copy Cruiser IDE/SATA High-Speed,
considered by industry experts to be one of
the nest Hard Drive duplicators and sanitizers
available.
The entire Aleratec team is committed to providing
you with courteous service. Our knowledgeable
staff will strive to make owning and operating your
new Aleratec HDD Copy Cruiser IDE/SATA High-
Speed a pleasant experience.
This Quick Start Guide will lead you step-by step
through the basic operation procedures of your
HDD Copy Cruiser IDE/SATA High-Speed.
For more detailed information on conguring the
HDD Copy Cruiser IDE/SATA High-Speed and
applying it’s various capabilities, please refer to the
User Guide on the CD included.
We at Aleratec appreciate your selection of
our product, and wish you great success and
enjoyment of your new HDD Copy Cruiser IDE/
SATA High-Speed.
Product Features
• Modelstoduplicateupto24orsanitize25IDEor
SATAharddiskdrivesatonce
• Upto120MB/scopyrates
• Third-partycertified7-Passwipesanitization
function;SecureErase,1-Passor3-Passwith
Verify
• LEDindicatorsoneachHDDbaythatvisually
confirmsuccessfulcompletionfortheharddrive
• Supports3.5”IDEHDDsand3.5”/2.5”SATAHDDs
• Supports2.5”IDEHDDswithoptionalAleratec
adapters(P/N350116),notincluded
Key Items on the HDD Cruiser IDE/SATA High-Speed
1:5 HDD Copy Cruiser IDE/SATA High-Speed
™
Part Number: 350130
1:11 HDD Copy Cruiser IDE/SATA High-Speed
™
Part Number: 350131
1:16 HDD Copy Cruiser IDE/SATA High-Speed
™
Part Number: 350132
1:24 HDD Copy Cruiser IDE/SATA High-Speed
™
Part Number: 350133
Controller:
LCD Display
OK is used to execute a
function, or enter a menu
ESC is used to cancel a
function, or exit a menu
UP arrow is used to scroll
backward through functions
or menus
DOWN arrow is used to
scroll forward through
functions or menus
Controller
Drive LEDs
Display
Panel
Drive Bay
Handle/Tab
Target
Drives
Warning: This product has a manually switchable
power supply. Make sure that the power supply
is set to the proper voltage for your region.
Source
Drive
Included Items
•HDDCopyCruiserIDE/SATAHigh-Speed™
•QuickStartGuide(thisdocument)
•IDEHardDriveTrays
•SATAHardDriveTrays
•PowerCord
•UserGuideCD
•RegistrationCard
•StandComponents(350131only)-6pieceswithscrews
See instructions on page 6 of the User Guide.
(1:11 HDD Copy Cruiser IDE/SATA High-Speed shown.)
© 2013 Aleratec, Inc. 9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A. Document Number: 350130-350133_ENG_QSG_Rev_A
Specifications subject to change without notice.
Technical Support Addresses and Phone Numbers
• Bye-mail:[email protected] – Skype:support.aleratec.com
• ByTelephone:1-818-678-0484 – FAXat:1-818-678-0483
• TechnicalSupportGroupcanbereached8:00AMto5:00PM,PacificTime,MondaythroughFriday,excludingU.S.holidays.
Pleasetrytocallfromaphonenearyourcomputersystem.
Accessisavailable24hoursaday,365daysayear,viaTheWorldWideWebat:www.aleratec.com
Getting Started
Loading the Hard Drives
1. Openthedrivetraydoorsbyliftingthetabontheleftsideofeachdrivebayyouwishtouse.
2. TaketheHardDiscDrive(HDD)andalignthedrive’sIDEplugtothelowerrighthandsideofthedrivebay.
3. SlidetheHDDintothedrivebayuntilitstops.Thedrivewillstillbeabout1inchoutsideofthebay.Whenthedoorisclosedit
willpushandplugtheHDDintotheduplicator.
4. Swingthedrivebaydoorclosedandpresstheleftsideofthedooruntilthetablatches.Whenitlatches,aclickcanbefeltand
heard.
Note:Ifyouareduplicating,thesourceharddiskdrivegoesinthetopbay.
Copy HDD
The“Copy”functionperformsacopyfromasourceHDDtooneormoretargetHDDs.ThetargetHDDsmustbeatleastaslarge
asthesource.TheHDDCopyCruiserIDE/SATAHigh-SpeedwillcopyeveryblockofcapacityonthesourceHDD.
1. LoadthesourceHDDandthetargetHDDsintotheHDDCopy
CruiserIDE/SATAHigh-Speed.Thesystemwillauto-detectthe
harddrives.Afterthedriveshavebeendetected,ascreen
similartotheonetotherightwillbedisplayed.
Note:BeforecopyingbesurethatthecapacityofthetargetHDDisequaltoorlargerthanthesourceharddrive.
2. PressOKtostartcopying.Thesystemwillauto-detecttheharddrives.Thefollowinginformationwillbedisplayed.
3. DuringthecopyprocesstheHDDCopyCruiserIDE/SATA
High-Speedwilldisplayprogressinformation.
Note: Thecopyingspeed,capacityanddurationmayvary
fromoneharddrivetoanother.
4. Onceduplicationiscomplete,ajobstatusscreenwillbe
displayed.

Please refer to the User Guide found on
the disc for more detailed information.
ESC
OK
Aleratec
1. Copy
ESC
OK
Detect Drives
Please wait...
ESC
OK
Searching Source
ESC
OK
Analyzing Source
ESC
OK
Copy 50.9 G
1 Target Ready
ESC
OK
Copy 16 50.9 G
7:35 26% 13.5 G
ESC
OK
Pass: 1 Fail: 0
Time: 20:18
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Aleratec 350132 Quick start guide

Aleratec
Brand
Aleratec
Model
350132
Category
HDD/SSD enclosures
Type
Quick start guide
This manual is also suitable for

Aleratec 350132 is a high-speed HDD copy cruiser that can duplicate or sanitize up to 16 IDE or SATA hard disk drives simultaneously. It features copy rates of up to 120 MB/s and supports 3.5" IDE HDDs and 3.5"/2.5" SATA HDDs.

With its third-party certified 7-Pass wipe sanitization function, Secure Erase, 1-Pass or 3-Pass with Verify, you can securely erase data from your hard drives, ensuring that your sensitive data is protected against unauthorized access.

The intuitive LED indicators on each HDD bay provide visual confirmation of successful completion for each hard drive, making it easy to monitor the progress of your duplication or sanitization tasks.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents