StarTech.com IDE2CF Owner's manual

Category
Interface cards/adapters
Type
Owner's manual

StarTech.com IDE2CF is a device that enables the user to connect a CompactFlash (CF) card to a computer system with an available 40 or 44-pin IDE channel. This allows the user to use a CF card as a storage device for their computer, providing them with additional storage capacity or the ability to transfer files between different devices.

The IDE2CF adapter supports both CF Type I and II cards, as well as Micro-Drive cards. It features multiple LED indicators to provide the user with information about the power status, card detection, and read/write activity. The adapter also includes jumper settings that allow the user to configure the power source and voltage for the CF card, as well as the mode of operation (Master/Single or Slave).

StarTech.com IDE2CF is a device that enables the user to connect a CompactFlash (CF) card to a computer system with an available 40 or 44-pin IDE channel. This allows the user to use a CF card as a storage device for their computer, providing them with additional storage capacity or the ability to transfer files between different devices.

The IDE2CF adapter supports both CF Type I and II cards, as well as Micro-Drive cards. It features multiple LED indicators to provide the user with information about the power status, card detection, and read/write activity. The adapter also includes jumper settings that allow the user to configure the power source and voltage for the CF card, as well as the mode of operation (Master/Single or Slave).

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 11/29/2011
For the most up-to-date information, please visit: www.startech.com
IDE2CF
40/44 Pin IDE to Compact Flash SSD Adapter
*actual product may vary from photos
Packaging Contents
• IDE2CFadapter
• InstallationGuide
System Requirements
• Computersystemwithavailable40or44-pinIDEchannel
Installation
1. InserttheCompactFlashcardintotheCN2slotontheadapter.
2. Changethejumpersettingstomatchyourconguration.
3. Mounttheadapterinsideyourcomputercase.
4. Connecteitherthe40or44-pinIDEribboncablefromyourIDE
controllertotheappropriateconnectorontheadapter.
5. Connecttheoppypowerconnector(SP4)fromyourpower
supplytotheCN5connectorontheadapter.
• CN2–CompactFlashsocket(Master/Singlemode)
• CN3–40-pin(2.54mmpitch)IDEconnector
• CN4–44-pin(2.0mmpitch)SFFIDEconnector
• CN5–Floppydiskdrivepowerconnector
• LED1–CompactFlashcard-detectindicator
• LED2–Read/Writeactivityindicator
• LED3–Power-onindicator
Jumper Settings
JP1–CompactFlashpowersourceselection:
1-2 * Externalpower(CN5)or44-pinSFFIDEconnector(CN4)
2-3
Pin20of40-pinstandardIDEconnector(CN3),forVIA
EPIAseriesmotherboards
JP2–CompactFlashvoltageselection:
1-2 * +5.0V
2-3 +3.3V
JP3–CompactFlashmodeselection:
1-2 * Master/Single
2-3 Slave
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com.WheretheyoccurthesereferencesareforillustrativepurposesonlyanddonotrepresentanendorsementofaproductorservicebyStarTech.com,oranendorsementoftheproduct(s)
towhichthismanualappliesbythethird-partycompanyinquestion.Regardlessofanydirectacknowledgementelsewhereinthebodyofthisdocument,StarTech.comherebyacknowledgesthatall
trademarks,registeredtrademarks,servicemarks,andotherprotectednamesand/orsymbolscontainedinthismanualandrelateddocumentsarethepropertyoftheirrespectiveholders.
Technical Support
StarTech.com’slifetimetechnicalsupportisanintegralpartofourcommitmenttoprovideindustry-leadingsolutions.Ifyoueverneedhelpwithyourproduct,visitwww.startech.com/supportandaccess
ourcomprehensiveselectionofonlinetools,documentation,anddownloads.
Forthelatestdrivers/software,pleasevisitwww.startech.com/downloads
Warranty Information
Thisproductisbackedbyatwoyearwarranty.
Inaddition,StarTech.comwarrantsitsproductsagainstdefectsinmaterialsandworkmanshipfortheperiodsnoted,followingtheinitialdateofpurchase.Duringthisperiod,theproductsmaybereturned
forrepair,orreplacementwithequivalentproductsatourdiscretion.Thewarrantycoverspartsandlaborcostsonly.StarTech.comdoesnotwarrantitsproductsfromdefectsordamagesarisingfrom
misuse,abuse,alteration,ornormalwearandtear.
Limitation of Liability
InnoeventshalltheliabilityofStarTech.comLtd.andStarTech.comUSALLP(ortheirocers,directors,employeesoragents)foranydamages(whetherdirectorindirect,special,punitive,incidental,
consequential,orotherwise),lossofprots,lossofbusiness,oranypecuniaryloss,arisingoutoforrelatedtotheuseoftheproductexceedtheactualpricepaidfortheproduct.Somestatesdonotallow
theexclusionorlimitationofincidentalorconsequentialdamages.Ifsuchlawsapply,thelimitationsorexclusionscontainedinthisstatementmaynotapplytoyou.
Specications
Bus Interface ATA
Connectors
40-pinIDE,
44-pinIDE,
SP4oppypower,
CFcardslot
LED Indicators
Power,
CardDetect,
Activity
CompactFlash
Compatibility
CFTypeIandII,Micro-Drive
  • Page 1 1
  • Page 2 2

StarTech.com IDE2CF Owner's manual

Category
Interface cards/adapters
Type
Owner's manual

StarTech.com IDE2CF is a device that enables the user to connect a CompactFlash (CF) card to a computer system with an available 40 or 44-pin IDE channel. This allows the user to use a CF card as a storage device for their computer, providing them with additional storage capacity or the ability to transfer files between different devices.

The IDE2CF adapter supports both CF Type I and II cards, as well as Micro-Drive cards. It features multiple LED indicators to provide the user with information about the power status, card detection, and read/write activity. The adapter also includes jumper settings that allow the user to configure the power source and voltage for the CF card, as well as the mode of operation (Master/Single or Slave).

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI