StarTech.com PATA2SATA3 User manual

Brand: StarTech.com

Model: PATA2SATA3

Category: Cable interface/gender adapters

Type: User manual

StarTech.com PATA2SATA3 is a versatile adapter that enables seamless data transfer and storage expansion between modern SATA and legacy IDE devices. With its dual functionality, it serves as both an IDE to SATA and SATA to IDE bridge, providing flexible connectivity options for various storage needs.

Bi-Directional SATA/IDE Adapter Converter

PATA2SATA3

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l’utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l’uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Packaging Contents

• 1 x SATA/ IDE converter adapter

• 1 x SATA cable

• 1 x SP4 to dual LP4 power Y-adapter cable

• 1 x Instruction Manual

Installation

IDE controller to SATA hard drive

1. Set the DIP switches on the adapter to either Master or Slave mode (see

DIP Switch Settings diagram).

2. Plug the 40-pin female IDE connector on the adapter directly into the

male 40-pin IDE connector on your motherboard or IDE/EIDE controller

card.

3. Connect a 7-pin SATA cable from the black “To Drive” connector to the

connector on the SATA hard drive.

4. Connect the SATA power from the computer power supply to the SATA

hard drive.

5. Connect an SP4 oppy power connector from the computer power

supply to the SP4 connector on the adapter. If one is not available use

the included LP4 to SP4 adapter cable to connect one of the LP4 molex

connectors from the power supply.

Instruction Manual

7-pin SATA

(To Drive)

7-pin SATA

(To Computer)

40-pin IDE

connector

4-pin SP4 oppy

power connector

SATA controller to IDE hard drive

1. The DIP switches do not matter in this mode.

2. Plug the 40-pin female IDE connector on the adapter, directly into the

40-pin male connector on the IDE/EIDE hard drive.

3. Connect a 7-pin SATA cable from the orange “To Computer” connector to

the 7-pin SATA connector on the motherboard or SATA controller card.

4. Connect an LP4 molex power connector from the computer power

supply to the hard drive.

5. Connect an SP4 oppy power connector from the computer power

supply to the SP4 connector on the adapter. If an SP4 connector is not

available, use the included LP4 to SP4 adapter cable to connect on of the

LP4 molex connectors from the power supply.

*actual product may vary from photos

System Requirements

• 40-pin IDE/EIDE or 7-pin SATA enabled computer system

• 3.5” IDE/EIDE or SATA hard drive

Manual Revision: 01/27/2012

For the most up-to-date information, please visit: www.startech.com

Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names & Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of

third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an

endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body

of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and

other protected names and/or symbols contained in this manual and related documents are the property of their

respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions.

If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of

online tools, documentation, and downloads.

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted,

following the initial date of purchase. During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant

its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees

or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise),

loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential

damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Specications

Connectors

1 x 40-pin IDE Female

1 x 7-pin SATA Male (orange)

1 x 7-pin SATA Male (black)

1 x 4-pin SP4 Floppy Power Male

Chipset Sunplus SPIF223A

Operating Temperature 0°C ~ 70°C (32°F ~ 158°F)

Storage Temperature -40°C ~ 150°C (-40°F ~ 302°F)

Humidity 90% RH

Dimensions 61.0mm x 50.0mm x 11.0mm

Maximum Data Transfer

Rates

SATA: 1.5Gb/s

IDE: 133 Mb/s

StarTech.com PATA2SATA3 User manual

Brand: StarTech.com

Model: PATA2SATA3

Category: Cable interface/gender adapters

Type: User manual

Download PDF

report

StarTech.com PATA2SATA3 User manual

StarTech.com PATA2SATA3 User manual

Related papers

Other documents