klima C16 User guide

Brand: klima

Model: C16

Type: User guide

The klima C16 is a programmable thermostat that offers precise temperature control and energy-saving features. With its intuitive interface and various programming options, you can set customized heating schedules for different periods of the day and week. Whether you want to maintain a cozy temperature while you're home or save energy during your absence, the klima C16 provides flexible control to suit your needs.

C16 Guide For programming the Controller

The C16 will follow the Schedule below as this is the default parameters.

SECTION 1

-WAKE (PERIOD 1 START TIME): when it will switch on in the morning and what

temperature it will heat up to

-LEAVE (PERIOD 1 END TIME): When it will turn off and what temperature it

maintains at, (We recommend for it to stay a temperature that is 5 degrees lower

than the temperature set for when it is heating)

-BACK (PERIOD 2 START TIME): When it will turn back on for the afternoon

-SLEEP (PERIOD 2 END TIME): When it will turn off (We recommend for it to stay a

temperature that is 5 degrees lower than the temperature set for when it is heating)

If you want to set it so you can set Each day individually then please follow Steps A1

If you want to set it so you can program Monday – Friday as one time and then

Saturday and Sunday as different day, please follow Steps B1.

A STEPS

A1) Press and Hold the square Button for three seconds (this should appear)

A2) Press the Up arrow until in the top right it says ‘SER’

A3) Press the Square Button ONCE

A4) Press the square Button until it says “5” in the top left

A5) Make Sure in the top right it says “00” then press the square button until you’re

at the home screen.

B STEPS

B1) Follow steps A1 – A4

B2) Press the up button ONCE, in the top right it will say ’01’

B3) Press the square button until you’re at the home screen.

C STEPS -> PROGRAMMING OF CONTROLLER UNIT

BEFORE STARTING THIS PROGRAMMING SECION PLEASE REVIEW THE TOP SECTION

WHICH ATTACHED IS THE SCHEDULE. WHEN PROGRAMMING THE SCHEDULE WILL

FOLLOW THE PATTERN DISPLAYED IN SECTION 1(AT BEGINNING OF GUIDE)

C1) Press and HOLD the square button for three seconds

C2) Press the Up arrow until in the top right it says “EVE”

C3) Press the square button ONCE

C4) Press the up arrow to select the day of the week you want to program

C5) When on the day you want to program press the square button ONCE

C6) The first screen will show a House type symbol (please look at schedule in

SECTION1, the symbols shown represent the different time periods) in the bottom

left-hand corner as an example can be seen below

C7) With following the schedule at the top choose the relevant period you want to

change by pressing the UP or DOWN arrow

C8) Press the Square Button Once

C9) Press the Up arrow or Down arrow until you select the desired hour then press

the square button ONCE

C10) Press the Up or Down arrow until you select it to the correct Minutes and then

press the square button ONCE

C11) Press the Up or Down arrow until you select the temperature you want to heat

it up to

C12) Repeat steps C7 – C11 for the rest of the different periods and this will follow

the schedule shown in SECTION 1

C13) When you have completed setting the times, then press the UP arrow until END

is highlighted and flashing and press the square button ONCE.

C14) This will now implement and will follow the programmed times

klima C16 User guide

klima C16 User guide

Other documents