KUFATEC Complete Set Sensor User manual

Type
User manual
Installation Instructions
Complete Set Sensor-Operated Electrical Tailgate Opening
v1.0 (17.08.2022)
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 1
Contents
1 Liability Exclusion 3
2 Copyright 4
3 General notes 4
4 Safety Instructions 5
5 Requirements for the intended use 5
6 How to connect a cable to another 6
7 Note Cable Inscription/Color 7
8 Assembly Instructions 8
9 Assembly Note 9
10 Disassembly coverings front driver’s side 10
11 Disassembly taillights 11
12 Disassembly rear bumper 13
13 Cable routing from the rear to the front 15
14 Connection control unit for entry and start authorization/ground 16
15 Exchange control unit for entry/start authorization 17
16 Assembly foot gesture control unit 18
17 Assembly rear bumper 19
18 Assembling the vehicle 20
19 Coding with Coding Interface 20
20 Coding Interface 20
21 Bus rest 21
22 Additional vehicle function 21
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 2
8 Assembly Instructions
The following illustration shows the cable routing as well as the position of the individual components.
2
13,4,5
3
5
4
2
1
Figure 3: Vehicle overview
1 Entry/start authorization control unit
2 Ground pin
3 Foot gesture control unit
4 Black sensor cable
5 Red sensor cable
Please be aware that this overview is only for illustration purposes. Always lay the cable set in the
most convenient and shortest way possible. For a detailed description of the cable routing,
please refer to the relevant sections of the following manual.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 8
  • Page 1 1
  • Page 2 2
  • Page 3 3

KUFATEC Complete Set Sensor User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI