KUFATEC Complete Set Rear User manual

Brand: KUFATEC

Model: Complete Set Rear

Type: User manual

Installation Instructions

Complete Set Rear View Camera

v1.0 (16.08.2022)

Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 1

Contents

1 Liability Exclusion 3

2 Copyright 4

3 General notes 4

4 Safety Instructions 5

5 Requirements for the intended use 5

6 How to connect a cable to another 6

7 Note Cable Inscription/Color 7

8 Assembly Instructions 8

9 Assembly Note 9

10 Disassembly main unit 10

11 Disassembly sill trim front passenger’s side 11

12 Disassembly fuse box 12

13 Disassembly sill trim rear passenger’s side 13

14 Disassembly side covering trunk passenger’s side 14

15 Disassembly tailgate covering 15

16 Disassembly tailgate button 16

17 Assembly rear view camera 17

18 Connection rear view camera 18

19 Cable routing to the front 19

20 Connection fuse box/CAN distributor/ground pin/main unit 20

21 Assembling the vehicle 21

22 Coding Interface 21

23 Using the dongle during the calibration drive 22

24 Bus rest 23

25 Additional vehicle function 23

Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 2

8 Assembly Instructions

The following illustration shows the cable routing as well as the position of the individual components.

1

2

3

1

3

2

Figure 3: Vehicle overview

•1 Rear view camera

•2 Fuse box/ground pin/CAN distributor

•3 Main unit

Please be aware that this overview is only for illustration purposes. Always lay the cable set in the

most convenient and shortest way possible. For a detailed description of the cable routing,

please refer to the relevant sections of the following manual.

Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 8

1
2
3

KUFATEC Complete Set Rear User manual

Brand: KUFATEC

Model: Complete Set Rear

Type: User manual

Related papers

Other documents