Rear Park Pilot

KUFATEC Rear Park Pilot User manual

  • Hello! I have reviewed the Installation Instructions for the Rear Park Pilot system. This document provides detailed instructions regarding cable routing, component placement, sensor assembly, and vehicle disassembly, including specific connection points. I am ready to answer your questions about the installation process or any other part of the document.
  • What is the purpose of the park pilot control unit?
    Where are the rear sensors placed?
    What does the installation involve?
Installation Instructions
Rear Park Pilot
v1.0 (15.07.2022)
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 1
Contents
1 Liability Exclusion 3
2 Copyright 4
3 General notes 4
4 Safety Instructions 5
5 Requirements for the intended use 5
6 How to connect a cable to another 6
7 Note Cable Inscription/Color 7
8 Assembly Instructions 8
9 Assembly Note 9
10 Disassembly coverings front driver’s side 10
11 Disassembly back seat 12
12 Disassembly trunk side covering driver’s side 14
13 Disassembly taillights 16
14 Disassembly rear bumper 17
15 Assembly holder/control unit 18
16 Cable routing to the rear 19
17 Assembly sensors 21
18 Assembly sensor holders with adhesive pads 22
19 Assembly rear bumper 23
20 Assembly/Connection warning buzzer 24
21 Connection driver’s footwell 25
22 Assembling the vehicle 26
23 Coding with Coding Interface 26
24 Coding Interface 26
25 Bus rest 27
26 Additional vehicle function 27
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 2
8 Assembly Instructions
The following illustration shows the cable routing as well as the position of the individual components.
1,2
3
4
5
5
5
5
5
4
3
2
1
Figure 3: Vehicle Overview
1 Park Pilot control unit, fuse box, CAN gateway
2 Body control module (BCM)
3 Ground pin
4 Warning buzzer
5 Rear sensors
Please be aware that this overview is only for illustration purposes. Always lay the cable set in the
most convenient and shortest way possible. For a detailed description of the cable routing,
please refer to the relevant sections of the following manual.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 8
/