Installation Instructions
Complete Set IQ Facelift LED Taillights
v1.0 (15.07.2022)
Contents
1 Liability Exclusion 3
2 Copyright 4
3 General notes 4
4 Safety Instructions 5
5 Requirements for the intended use 5
6 How to connect a cable to another 6
7 Note Cable Inscription/Color 7
8 Assembly Instructions 8
9 Assembly Note 9
10 Disassembly covering driver’s side 10
11 Disassembly taillights (vehicle body) 12
12 Disassembly side covering trunk driver’s side 13
13 Disassembly tailgate covering 15
14 Disassembly taillights (tailgate) 17
15 Adaptation plug coding taillights 18
16 Cable routing/connection taillights (tailgate) 19
17 Cable routing/connection outer taillights 20
18 Cable routing to BCM 21
19 Connection BCM 22
20 Assembling the vehicle 23
21 Coding with Coding Interface 23
22 Coding Interface 23
23 Bus rest 24
24 Additional vehicle function 24
8 Assembly Instructions
The following illustration shows the cable routing as well as the position of the individual components.
1
3
2
1
3
3
2
2
Figure 3: Vehicle Overview
•1 Body control module (BCM)
•2 Inner taillight
•3 Outer taillight
Please be aware that this overview is only for illustration purposes. Always lay the cable set in the
most convenient and shortest way possible. For a detailed description of the cable routing,
please refer to the relevant sections of the following manual.
/
