ZPE -DOOR-U01 Flange Mount Proximity Sensor and Actuator Installation guide

-DOOR-U01 Flange Mount Proximity Sensor and Actuator
Brand
ZPE
Model
-DOOR-U01 Flange Mount Proximity Sensor and Actuator
Category
Rack accessories
Type
Installation guide

This manual is also suitable for

Quick Install Guide
ZPESYSTEMS.COM
Flange Mount Proximity Sensor & Actuator (USB)
ZPE-DOOR-U01
COMPATIBLE WITH
ALL NODEGRID DEVICES
HARDWARE
Requirements ZPE-IO8-U01
SOLD SEPARATELY
Must be installed to the Nodegrid environment
prior to setting up sensor(s) & actuator(s)
Supply Voltage 12V via USB
Switching up to 265Vac/300Vdc at 10VA
Operating Temperature -40º to 150° C (104º to 302º F)
Cable Attached. 4 meters (13 feet)
DESCRIPTION
Ensure rack doors are in the proper position using this proximity sensor.
You don’t need standby power, and can simply install using adhesives or
hardware. This hermetically sealed, magnetically operated sensor works
through wood, plastic, and other non-ferrous materials, with contacts that
function even after optical and other technologies fail due to contamination.
Read door status using CLI, Web, SNMP or Restful APIs.
All rights reserved. September 8, 2022
ASSEMBLED IN THE USA
ZPESYSTEMS.COM +1.844.4ZPESYS
Product Specifications ZPE-DOOR-U01
Quick Install Guide ZPE-DOOR-U01
All rights reserved. September 8, 2022
Let’s set up Flange Mount Proximity Sensor & Actuator
Make sure that the GPIO is on hand and set up properly to a Nodegrid device before connecting the pieces as shown.
Refer to the GPIO Module Quick Install Guide for details.
1
8-Channel GPIO Module ZPE-I08-U01
Not included Must be already installed to a Nodegrid hardware
Flange Mount Proximity Sensor
Cable: 4 meters
FRONT DOOR
REAR DOOR
Actuator Sensor
Mount sensor(s) & actuator(s) on a surface where wires can run through
and won’t block the door when opened. You may screw it on or
use mounting tape.
2
We suggest placing the product here *Rack cage may be a different model or size
Aux
RR M/Lock
RR E/LockRR E/Lock
FR M/Lock
FR E/Lock
Smoke
USB GPIO 8
GPIO
GNO 7 6 5 4 3 2 1 0
USB
FR Door
RR Door
Screws not included
If mounting, use four self-tapping screws.
3Ensure minimum Nodegrid OS version meets sensor requirements.
Upgrade Nodegrid OS to minimum version 5.4.1
OPTIONAL: To configure data collection in ZPE Data Lake, refer to
Appendix C in the latest ZPE Cloud Manual at:
zpesystems.com/user-manuals/
5
For more information, visit the "Sensor Quick Install Guide" section at:
zpesystems.com/user-manuals/
4
FR Door
RR Door
  • Page 1 1
  • Page 2 2

ZPE -DOOR-U01 Flange Mount Proximity Sensor and Actuator Installation guide

-DOOR-U01 Flange Mount Proximity Sensor and Actuator
Brand
ZPE
Model
-DOOR-U01 Flange Mount Proximity Sensor and Actuator
Category
Rack accessories
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents