Kichler Lighting 52214PN User manual

Type
User manual

Kichler Lighting 52214PN is a versatile light fixture that offers multiple mounting options and supports various bulb types, making it suitable for a wide range of indoor lighting applications. With its adjustable mounting plate, you can easily install it on different outlet boxes, and the fixture can be mounted with the glass facing up or down to suit your preference. It features decorative rods and candle covers for an elegant look, and the included discs can be used to further customize the appearance.

Kichler Lighting 52214PN is a versatile light fixture that offers multiple mounting options and supports various bulb types, making it suitable for a wide range of indoor lighting applications. With its adjustable mounting plate, you can easily install it on different outlet boxes, and the fixture can be mounted with the glass facing up or down to suit your preference. It features decorative rods and candle covers for an elegant look, and the included discs can be used to further customize the appearance.

IS-52214-US
Were here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
CLEANING:
• Always be certain that electric current is turned o before
cleaning.
• Only a so damp cloth should be used. Harsh cleaning
products may damage the nish.
[A] Mounting
Plate
[B] Outlet Box
[C] Mounting
Screws
[D] Canopy
[E] Plate
Mounting
Screws
[F] Decorative
Rods
[G] Candle
Covers
[H] Discs
1) Aach mounng plate[A] to outlet box[B] using the
plate mounng screws[E]. Mounng plate can be
adjusted to suit posion of xture.
2) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng plate is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, and thread into
mounng plate.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
3) Make wire connecons. Reference chart below for
correct connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
4) Push xture to wall carefully aligning holes in mounng
plate with holes in canopy[D].
NOTE: Fixture can be mounted with glass in the up or
down posion. Make sure all wires are inside canopy and
do not get pinched between canopy and wall.
5) Screw in four (4) mounng screws[C]: two on the le
side of canopy and two on the right side of canopy[D].
6) Screw decorave rods[F] onto threads protruding from
top of center arms.
7) Carefully lower candle covers[G] down over sockets.
8) Carefully slide discs[H] down over candle covers.
9) Insert recommended bulbs (not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Installaon Instrucons
B
A
C
E
F
H
G
D
H
F
C
C
D
G
FRONT VIEW
TOP VIEW
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kichler Lighting 52214PN User manual

Type
User manual

Kichler Lighting 52214PN is a versatile light fixture that offers multiple mounting options and supports various bulb types, making it suitable for a wide range of indoor lighting applications. With its adjustable mounting plate, you can easily install it on different outlet boxes, and the fixture can be mounted with the glass facing up or down to suit your preference. It features decorative rods and candle covers for an elegant look, and the included discs can be used to further customize the appearance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI