B07F2R74G9, B07F2R72G9, B07F2F65WW
High-Pressure Shower Head - 3-Inch
Cabezal de Ducha de Alta Presión - 7,62 cm (3Pulgadas)
Pomme de Douche Haute Pression - 7,62 cm (3 po)
English ..................................... 3
Español .................................... 6
Français ................................... 9
3
Welcome Guide
•
English
Contents:
Before getting started, ensure the package contains the following components:
Hand Shower x1
Recommended Tools:
• Safety Goggles
• Blanket or Tarp
• Adjustable wrench
• Pliers
• Rags
• Plumber’s tape
Before First Use
• Check for transport damage.
Risk of suffocation! Keep any packaging materials away from children – these
materials are a potential source of danger, e.g. suffocation.
Installation
Step 1:
Shut Off Water Supply
• Make sure the water (knobs or handle) are completely turned off. This will prevent any water
from leaking out as you work to replace the shower head.
• Lay a blanket or tarp down in the tub or on the shower floor to prevent any shower head bits
from possibly falling down the shower drain, and to protect the tub or shower floor surface from
falling tools or materials.
DANGER
4
Installation
Step 2:
Removing old Shower Head or Rain Shower Head
•
Wrap a cloth around the base of the shower arm, use a pair of pliers and grip onto the cloth.
Using an adjustable wrench, loosen and remove the shower head by turning it counter clockwise.
Step 3:
Installing new Shower Head or Rain Shower Head
• Use a clean rag to wipe off the screw threads of the shower arm. You could also use an old
toothbrush to get in between the threads and clean out any built-up grime and rust. Remove
any old plumber’s tape from the shower arm’s threads.
• Apply about 2-3 turns of plumber’s tape to the threads of the shower arm, wrapping the tape
tightly in a clockwise direction and making sure that it is embedding in the threads properly. Be
sure to press the tape into the grooves of the threads.
• Place the new shower head onto the shower arm and twist it clockwise by hand to secure it
into place. Once the shower head is secure, wrap the base of the shower head with a cloth and
wrap the base of the shower arm with a cloth. Use the pliers to grip onto the cloth and hold
the shower arm base in place. Use the adjustable wrench to clamp onto the cloth and turn the
shower head clockwise as far as it will go.
Step 4:
Check for leaks
• Turn the water back on and turn on the shower and check for leaks.
•
If you find any leaks, try tightening the shower head a little more (Step 3) and check again for leaks.
• If you still see a leak, remove the shower head (Step 2) and remove and reapply any old
plumber’s tape and follow Step 3.
Cleaning and Maintenance
• Avoid using abrasive chemicals when cleaning, read the cleaner product label prior to use.
5
Warranty Information
To obtain a copy of the warranty for this product:
Visit amazon.com/AmazonBasics/Warranty
— or —
Contact Customer Service at 1-866-216-1072
Feedback
Love it? Hate it?
Let us know with a customer review.
AmazonBasics is committed to delivering customer-driven products that live up to your high
standards. We encourage you to write a review sharing your experiences with the product.
Please visit: amazon.com/review/review-your-purchases#
For further services:
Visit amazon.com/gp/help/customer/contact-us
— or —
Contact Customer Service at 1-866-216-1072
MADE IN CHINA
amazon.com/AmazonBasics
/
