iRobot 550 User manual

500/600 Series Owner's Manual

P.S. Don’t miss out on your exclusive beneﬁts! Register your

Roomba online right now at www.irobot.com/register.

Dear iRobot Roomba Owner,

Thank you for purchasing an iRobot Roomba vacuum cleaning

robot. You’ve joined the millions of people who clean with robots -

the smarter way to get it done.

Please take a few moments to read this manual and get acquainted

with your Roomba, to get the best performance from your robot.

If you have any questions, visit our website at www.irobot.com for

more information.

Register your robot to instantly activate your warranty and enjoy

these exclusive beneﬁts:

• Take advantage of iRobot’s award-winning customer service

Get support tailored to your speciﬁc robot, including answers

to questions, maintenance tips, video demos, live chat and

more.

• Get product updates and other valuable information

Be among the ﬁrst to ﬁnd out about new robots, exclusive

discounts and special promotions.

When you register, you can also tell us about your experience

with your Roomba; iRobot listens to our customers and makes

enhancements to our robots based on your valued feedback. We’d

love to hear from you!

Register your robot right now at www.irobot.com/register.

On behalf of the entire team, thank you for choosing iRobot; we

appreciate your business, feedback and loyalty.

Here’s to robots that make a difference!

Yours for less chores and more life,

Colin Angle

Chairman, CEO and Co-Founder

iRobot Corporation

P.S. Don’t miss out on your exclusive beneﬁts! Register your

Roomba online right now at www.irobot.com/register.

4 iRobot Roomba 500 Series

Important Tips

Roomba contains electronic parts. DO NOT submerge Roomba or spray it

with water. Clean with a dry cloth only.

Before using Roomba the ﬁrst

time, you need to activate Roomba

by removing the battery pull tab.

Charge Roomba overnight before

ﬁrst time use.

Remove battery pull tab

For Best Performance

• Remove and clean Roomba’s brushes after every use.

• Empty Roomba’s bin and clean its lter after every use.

• Use a Virtual Wall

®

(optional accessory) to keep Roomba cleaning where

you want it.

• Use your Roomba frequently.

Battery Life

To extend Roomba’s battery life and keep Roomba cleaning at peak

performance:

• Always keep Roomba plugged in when not in use.

• Recharge Roomba as soon as possible. Waiting several days to

recharge Roomba can damage the battery.

• For storage off the power supply, remove the battery from Roomba and

store in a cool, dry place.

• Blue or black batteries should be stored after Roomba has been

used.

• Yellow batteries should be stored after being fully charged.

Turning Roomba on and off

• To turn Roomba ON, press CLEAN once. You will hear a

beep and the CLEAN button will light.

• To start a cleaning cycle, press CLEAN again. Roomba will

start a cleaning cycle.

• To pause Roomba, press CLEAN while Roomba is cleaning.

• To turn Roomba OFF, press and hold the CLEAN button

until Roomba’s lights turn OFF.

• To resume the cleaning cycle, press CLEAN again.

For more detailed information, visit: www.irobot.com 5

Table of Contents

iRobot Roomba Anatomy .............................................6

Cleaning Pattern ...........................................................7

Cleaning Modes ............................................................8

Cleaning System ...........................................................9

Cleaning Bins ..............................................................10

Battery Storage and Charging ............................. 11-12

Optional Accessories .................................................13

Virtual Wall

®

..................................................... 13-14

Virtual Wall

®

Lighthouses

™

.............................. 15-16

Home Base

®

..........................................................17

Wiresless Command Center .................................18

Remote Control .....................................................19

Scheduling Roomba (selected models) .................. 20-21

Regular Maintenance ........................................... 22-24

Language Selection Mode (selected models) ................25

Troubleshooting .................................................... 26-27

Replaceable Modules ........................................... 28-32

Frequently Asked Questions ......................................33

Important Safety Instructions ....................................34

iRobot Customer Care ...............................................35

6 iRobot Roomba 500 Series

iRobot Roomba Anatomy

Infrared Sensor

Bin Release Button

Power Supply Socket

Flexible

Brush

Cliff Sensor

Openings

Edge-Cleaning

Side Brush

Dirt Detect

™

Sensor

Left Wheel

Module

Right Wheel

Module

Contact Points

for Home Base

(selected

models)

Brush Guard Release Tabs

Brush

Bearings

Brush

Guard

Removable

Caster Wheel

Buttons and Lights

Bottom View

Main

Brush

Faceplate

Bin

End Caps

SPOT Button

CLEAN/Power

Button

SPOT/DOCK Button

(varies by model)

Dirt Detect

™

(Models 500 - 549) (Models 550 and above)

Scheduling

Interface

Troubleshooting

Light

DOCK Button (models 550-599)

MAX Button (models 600+)

SPOT Button

CLEAN/Power

Button

Dirt Detect

™

Troubleshooting

Light

For more detailed information, visit: www.irobot.com 7

Cleaning Pattern

Roomba is a robot that cleans ﬂoors differently than the way most people

clean their ﬂoors. Roomba uses its robot intelligence to efﬁciently clean

the whole ﬂoor, under and around furniture and along walls.

Roomba calculates the optimal cleaning path as it cleans and determines

when to use its various cleaning behaviors:

Spiraling: Roomba uses

a spiral motion to clean a

concentrated area.

Wall Following: Roomba

uses this technique to

clean the full perimeter

of the room and navigate

around furniture and

obstacles.

Room Crossing: Roomba

crisscrosses the room

to ensure full cleaning

coverage.

Dirt Detection (selected

models): When Roomba

senses dirt, the blue Dirt

Detect™ light is lit and

Roomba cleans more

intensely in that area.

TIP: Roomba takes approximately 25 minutes to clean an average room and

will pass over the same area of the ﬂoor multiple times to ensure total

ﬂoor coverage.

TIP: For most efcient cleaning, clear your oor of clutter and use a Virtual

Wall to conﬁne Roomba to one room.

8 iRobot Roomba 500 Series

Cleaning Modes

Roomba will clean based on the cleaning mode you select. Roomba has

three cleaning modes.

Clean Mode (all models)

Roomba automatically calculates the room size and adjusts its cleaning

time appropriately.

Spot Mode (all models)

Roomba will spiral approximately three feet in diameter and then spiral

back to where it started, intensely cleaning a localized area.

Scheduled Cleaning Mode (Models 550 and above)

When a future cleaning time is programmed, Roomba enters Scheduled

Cleaning Mode. When scheduled to clean, Roomba will occasionally ﬂash

its next cleaning time to remind you of its schedule. At the speciﬁed time,

Roomba leaves its Home Base, cleans, and then returns to the Home

Base to recharge when it’s done.

For more detailed information, visit: www.irobot.com 9

Cleaning System

Roomba features a patented three-stage cleaning system.

Floor Surfaces

Roomba works on wood, carpet, tile, vinyl, and linoleum, and adjusts

automatically to different ﬂoor types.

Roomba automatically senses stairs and other cliffs. Roomba might

stall when confronting rounded edges and might slide over particularly

slippery surfaces. Extremely dark-colored ﬂoors may contribute to

Roomba’s cliff sensors working less effectively.

Anti-Tangle system

Roomba won’t get stuck on cords, carpet fringe or tassels. When Roomba

senses it has picked up a cord or tassel, it will automatically stop its main

brushes or side brush and try to escape. Roomba may make a clicking

noise when anti-tangle is activated.

1

Side brush

sweeps along

edge of walls and

into corners.

2

Two counter-

rotating brushes

scoop up dirt,

hair, and debris

into the bin.

3

Powerful vacuum picks up the

remaining ﬁne particles, dirt, and

hair. The ﬁlter traps dust and

small particles.

Filter

10 iRobot Roomba 500 Series

Cleaning Bins

Roomba is compatible with three interchangeable cleaning bins.

Aero-Vac

TM

or Original Vacuum Cleaning Bin

The Aero-Vac or Original vacuum cleaning bin should be used for

everyday cleaning. The dual action, counter-rotating brushes pick up

debris, while the vacuum sucks up the dirt and dust.

High-Capacity Sweeper Bin (optional accessory for all models)

The high-capacity sweeper bin can hold more debris than the vacuum

cleaning bin. Use this bin when cleaning larger-than-usual amounts of dirt

and dust, or when cleaning bigger pieces of debris.

Aero-Vac

TM

Vacuum Cleaning Bin

High-Capacity Sweeper Bin

Original Vacuum Cleaning Bin

For more detailed information, visit: www.irobot.com 11

Battery Storage and Charging

TIP: For best performance, charge Roomba’s battery overnight before using

Roomba for the ﬁrst time.

Roomba is powered by a rechargeable battery. Roomba’s battery can last

for hundreds of cleaning cycles if cared for properly.

Battery Life

To extend the battery life, iRobot recommends always storing Roomba

plugged in. For more details on how to maintain Roomba’s battery life,

visit www.irobot.com/support.

TIP: Recharge Roomba as soon as possible. Waiting several days to recharge

Roomba can damage the battery.

TIP: For storage off the power supply, remove the battery from Roomba and

store in a cool, dry place.

Cleaning Time

You should fully charge Roomba’s battery before each cleaning cycle.

When fully charged, Roomba’s battery will last for at least one full clean

cycle.

16-Hour Refresh Charge

If Roomba has been left off the power supply or Home Base for an

extended period, Roomba will initiate a special 16-hour charge cycle. This

extensive charge refreshes Roomba’s battery and extends the battery

life. While charging, Roomba’s “Clean” button will pulse quickly. Note: For

best results, do not interrupt this Refresh Charge.

12 iRobot Roomba 500 Series

CLEAN button light Battery status

Solid red Battery empty

Amber pulse Charging

Solid green Fully charged

Quick amber pulse 16-hour refresh charge

TIP: When Roomba is on the Home Base, always make sure that the Home

Base power light is on.

Or

Charging Roomba

Charge Roomba in one of two ways:

Charging Lights

Roomba uses the CLEAN button light to indicate that it is charging. Use

this chart to determine the status of the battery.

CLEAN/Power

Button

Using the Home Base Using the Power Supply Only

For more detailed information, visit: www.irobot.com 13

Virtual Wall

®

(optional accessory for selected models)

Virtual Walls create an invisible barrier

that Roomba will not cross. This invisible

barrier can be used to conﬁne Roomba

to a particular room or area, and

prevent it from getting too close

to electrical or computer cords,

delicate objects on the ﬂoor, etc.

The Virtual Walls can be set to block an opening

up to seven feet long. Note that the width of the Virtual Wall’s

beam also increases as its length increases, creating a cone-shaped

area which Roomba cannot pass. The Virtual Wall also creates a halo of

protection around itself, preventing Roomba from getting too close.

Original Virtual Wall

The Virtual Wall requires 2 “D” batteries and

automatically shuts off after 135 minutes. If the

power light blinks green, the batteries will soon

need replacement. Use the slider bar to adjust

the length of the barrier. A higher range will drain

the battery faster.

TIP: For best performance, place the Virtual Wall on the outside of the

doorway you wish to block.

TIP: Point the iRobot logo towards the opening you would like to block.

14 iRobot Roomba 500 Series

Compact Virtual Wall Battery Installation

To open the battery compartment, simply apply pressure on both iRobot

logos located on either side of the Virtual Wall and pull the bottom out,

separating the pieces.

Two “C” Alkaline Batteries

(not included)

Battery

Compartment

TIP: Point the arrows on top of the Virtual Wall towards the opening you would

like to block.

TIP: Point the arrows on top of the Virtual Wall towards the opening you would

like to block.

OFF

AUTO

Virtual Wall

®

(continued)

Compact Manual Virtual Wall

A Manual Virtual Wall must be turned on

by hand at the beginning of the cleaning

cycle to activate the barrier. A Manual

Virtual Wall and its power light will shut

off after 135 minutes. When battery

levels are low, the Virtual Wall power light will

blink slowly to indicate that it needs new batteries.

Compact Auto Virtual Wall

When an Auto Virtual Wall is set to “Auto”

mode, the power light blinks repeatedly

to indicate it is on. When battery levels

are low, the Virtual Wall blinks repeatedly

twice to indicate that it needs new batteries.

To save battery power, switch the Auto

Virtual Wall to “Off.” When in “Auto” mode, the

batteries should last approximately six months.

For more detailed information, visit: www.irobot.com 15

Virtual Wall

®

Lighthouses

™

(optional accessory for selected models)

Virtual Wall Lighthouses turn on and off automatically as Roomba is

turned on and off. When they are on, a light illuminates on the top of the

Virtual Wall Lighthouse. A Virtual Wall Lighthouse can be used in two

modes, either in Lighthouse mode or Virtual Wall mode, set by the Mode

Selector.

Lighthouse

Virtual Wall

0-3”

4-7”

8”+

Distance

0-1.5m

1.5-3m

3m+

Power Light

Two “C” Alkaline

Batteries

(not included)

TIP: When in Lighthouse mode, do not manually move Roomba from room to

room while it is cleaning.

Mode Selector

Lighthouse Mode

In Lighthouse mode, the Virtual Wall Lighthouse helps Roomba navigate

around your home and allows Roomba to clean room-to-room. Roomba

will clean the room it starts in, navigate to the next room, and then clean

the second room. When Roomba has completed cleaning, it will use the

Lighthouse to navigate back to the Home Base for recharging.

With two Virtual Wall

Lighthouses in lighthouse

mode, Roomba will clean

Room 1 for approximately

25 minutes, then clean

Rooms 2 and 3 for 25

minutes each, and then

return to the Home Base.

Home

Base

Lighthouse

Room 1

Room 2

Room 3

Lighthouse

Start

Roomba

here

Range Selector

16 iRobot Roomba 500 Series

TIP: To conserve battery life, remove the batteries if you are not planning to

use the Virtual Wall Lighthouse when cleaning. When battery levels are

low, the Virtual Wall Lighthouse power light will ash repeatedly.

Virtual Wall

®

Lighthouses

™

(continued)

In Lighthouse mode, place the Virtual Wall Lighthouse in the doorway

between two rooms with the iRobot logo facing forward.

Place Lighthouse

in the center of

the door frame

Virtual Wall Mode

In Virtual Wall mode, the Lighthouse creates an invisible barrier that

Roomba will not cross. It automatically turns off when Roomba turns off.

In Virtual Wall mode, place the Virtual Wall Lighthouse in the center of

the door frame. It blocks an opening up to seven feet or longer in three

increments: 0-3 ft., 4-7 ft., 7+ ft. Use the range selector to adjust the

length of the barrier. A longer range will drain the battery faster.

TIP: Avoid placing Virtual Wall Lighthouses too close to each other, the

Home Base, or furniture that could block the beams. Doing so could

prevent Roomba from recognizing the Lighthouses and navigating to the

next room.

Range

Selector

Distance

For more detailed information, visit: www.irobot.com 17

Home Base

®

(optional accessory for selected models)

Always keep the Home base plugged in.

Original Home Base

When Roomba is on the Home Base, the power and

docked lights are green to indicate Roomba is charging.

Compact Home Base

When the Home Base is plugged in, the power light

blinks to indicate that it is connected to the power

source. When Roomba connects to the Home Base, the

power light is solid to indicate that Roomba successfully

connected to the Home Base. When Roomba is

charging, Roomba’s “Clean” button pulses amber as

described in the “Battery Storage and Charging” section

of this manual. The “Clean” button is a solid green when

Roomba is completely charged.

Home Base Location

You should position the Home Base on a hard level surface and in an

area where Roomba has a clear path to return at the end of a cleaning

cycle. Locate the Home Base against a wall or other immovable object to

prevent it from sliding during docking. If Roomba is unable to dock on its

ﬁrst attempt, it will try again until it docks successfully.

TIP: Do not place the Home Base within 4 feet of a stairwell.

SCALE 1.000

Chair

Table

Home

Base

Stairs

Area Rug

18 iRobot Roomba 500 Series

Wireless Command Center

(optional accessory for selected models)

The Wireless Command Center lets you conveniently control Roomba’s

functions. You can use it to turn Roomba on and off, schedule Roomba to

clean, and steer Roomba around your room.

...

Pairing Roomba with the Wireless Command Center

Wireless Command Centers are set up to control only one Roomba. To pair

a Wireless Command Center with a Roomba, you need four “AA” batteries

(not included).

Troubleshooting

Light

SPOT

Roomba spirals approximately three feet in diameter and then spirals

back to where it started, intensely cleaning a local area.

CLEAN

Roomba automatically calculates the room size and adjusts its

cleaning time appropriately.

. . .

Models

570-599

Roomba attempts to dock on the Home Base, if present.

Models

600+

Roomba enters Max mode and cleans as long as the

battery allows.

Battery

Indicator

. . .

1

Make sure Roomba’s battery is fully charged.

2

Unplug the power supply or remove Roomba from its Home Base.

3

Install three “AA” batteries into the Command Center.

4

Hold down the left drive button while installing the fourth battery.

5

Continue holding the button for 3 seconds or until the days of the

week lights ﬂash in a sequence from right to left (Saturday to Sunday).

6

Install the battery door and place the Command Center on top of

Roomba.

7

Press and hold the DAY and MINUTE buttons on the Command Center

for 2 seconds. The lights on the Command Center will ﬂash to indicate

the pairing has completed, and Roomba will make a two-tone beep.

8

When the Command Center is powered on from now on, the lights will

ﬂash in sequence from left to right until Roomba is under control.

For more detailed information, visit: www.irobot.com 19

TIP: Check that there is a direct line of sight from the Remote Control to

Roomba and that the remote is pointed at Roomba.

The Remote Control, Virtual Walls and Home Base operate using an invisible

infrared beam. If they are all used in the same area, Roomba may see

multiple infrared signals and will not operate. The Remote WILL NOT work

when Roomba is near Virtual Walls.

Before using your remote for the ﬁrst time, install 2 AA batteries (not

included).

SPOT

Roomba spirals approximately three

feet in diameter and then spirals back

to where it started, intensely cleaning a

local area.

CLEAN

Roomba automatically calculates the

room size and adjusts its cleaning time

appropriately.

. . .

Models 500-519 Roomba enters Spot

mode.

Models 520-599 Roomba attempts to

dock on the Home

Base, if present.

Models 600+ Roomba enters Max

mode and cleans as

long as the battery

allows.

. . .

Remote Control

(optional accessory for selected models)

The Remote Control lets you conveniently control Roomba’s functions.

You can use it to turn Roomba on and off and steer it around your

room without bending down. It also gives you remote access to these

commands:

SPOT

Button

CLEAN/Power

Button

. . .

Button

Directional

Buttons

20 iRobot Roomba 500 Series

Scheduling Roomba

(Models 550 and above)

Setting the Time

You must set the time before scheduling Roomba to clean.

1

Press and hold CLOCK.

2

While holding CLOCK, use the DAY, HOUR,

and MINUTE buttons to set the correct time.

3

Release CLOCK. Roomba will beep to

indicate that the time has been set.

Setting a Schedule

You can schedule Roomba to clean once per day, up to seven times

per week. You must set the time before setting a schedule.

To set a schedule:

1

Press and hold SCHEDULE.

2

While holding SCHEDULE, use the DAY,

HOUR, and MINUTE buttons to set the

schedule.

3

Release SCHEDULE. Roomba will beep to

indicate that the schedule has been set.

Viewing and Deleting Schedules

To view Roomba’s scheduled cleaning times:

1

Press and hold SCHEDULE.

2

While holding SCHEDULE, press the DAY

button to cycle through Roomba’s scheduled

cleaning times.

3

Release SCHEDULE.

Page is loading ...

iRobot 550 User manual

iRobot 550 User manual

Related papers

Other documents