Xiaomi Intelligent Robotic Vacuum Cleaner User manual

TableofContents

WarrantyCard

Username:

TableofContents 1

ImportantSafetyInstructions 2-4

Productcomposition/packinglist 5

Productcomposition/partname 6-7

Productuse/precautions 8-9

Productuse/accessoryinstallation 10-12

Detailedaddress:

TelephoneNo.:

Productmodel:

Dateofpurchase:

PurchaseStore:

Purchaseprice:

Invoicenumber:

Warrantydate:

Unitsforrepair:

OperationsGuide 13-15

APPconnection 16

Cleaningandmaintenance 17-20

Operationaltest 21-22

Voicepackage 23-25

Specifications/parameters 26

Troubleshooting 27

date

Maintenancerecords

Repairman

WarrantyCard 28

Safety instructions

Troubleshooting

Whenusing the product, pleaseremain vigilant and followthe following Content: Please

readthis instruction carefully before using theproduct and keepit properly.

Troublesignal

ProblemCauseanalysisandsuggestedsolutions

Error0:chest Oh,likethedustbox missing

Triggertheclean sweepwhenthedust boxistakenout

！Payattention

Mistake1: Example Oh,itlookslike the

topradarisblocked

ThetopYudais coveredandplacedin anopenarea

(withoutanyobstructions within6*6 squaremeters)

1. Theproblemsthatmayoccurduringthecleaningoftheproductshouldbeeliminatedassoon

aspossible.Pickupthepowercordandsmallobjectson thefloortoavoidobstructionofthe

productduringthecleaningprocess. Foldthefringeof thecarpetunderthecarpet,andkeep

thehangingcurtainsandtableclothsawayfromtheground.

Mistake2:master,Ineedaplacetostart

Pickuptheequipment;Orthedeviceissuspended

Theanti-fall sensorisblockedorplaced inahighplace

Mistake3:master,Please wipethe

bottomanti-drop sensor

2.Ifthereisasuspended environmentsuchasstairs,pleasetesttheproduct firsttoseeifitcan

detecttheedgeofthesuspended areawithoutfalling.Aprotectivefence shouldbesetatthe

edgeofthesuspendedarea topreventtheproductfromfalling.Itshould beensuredthatthe

protectivedevicewillnot causepersonalinjurysuchastumble.Thecritical valueofthe

anti-dropfunctionofthemachine isabove12cm,lowerthanthisheight maycausethe

machinetofall.

Mistake4:master,Please wipeoperation

justbeforethe sensor

Checkthatthe sensorisdirtyorobstructed

Dirtorchasing alongthewallprofile sensors

Mistake6: master,Please rubthetop of

theradar cover

Theuppercover anti-collisionoperation sensorisdirty

orhasbeenreturned togear

Oldedgeorcrash sensorisstuck

3.PleaseIfollowtheinstructionsinthemanualtousethepraduct.Onlyuseaccessories

recommendedorsoldbythemanufacturer.

Thedustboxis fullorthefilterneeds tobereplaced

4.Makesurethatthepowersupplyvoltagematchesthevoltagemarkedonthepowercord.

5.Beforeusingtheproduct,confirmthatthedustboxandfilternethavebeeninstalledinplace.

Mistake9:Please cleanthedustbox and

filterscreen surface

6.Ifthecharger isdamaged,inordertoavoiddanger,itmustbereplacedbyprofessionalsfrom

themanufacturer,itsmaintenancedepartmentorsimilardepartments.

Ｍistake10:I'm trapped,themastersave me

Ｍistake11:It's crooked,themaster quickly

putmeright

7.Beforecleaningandmaintenanceproductspleaseturntheproductoffthepowerswitch,off

thepowerswitchoftheproduct.

Ｍistake12:Oh risk,themainwheelseems

tobestuck,come andhelpme

8.Beforecleaningandmaintainingtheproduct,youshouldunplugtheplugfromthepower

outletinthefirsttime.

Ｍistake13:Ah, themainswipeseems tobe

stuck.Comeand helpme

Themainbrush isentangledorstuck

9.Beforediscardtheproduct,pleaseremovetheproductfromthechargingdock,turnoffthe

powerswitchoftheproduct,andremovethebattery.

Ｍistake14:Oh, sidebrushseemsstuck,

comehelpme

Sidebrushis entangledorstuck

Thechargingbase isnotfoundforrecharging, orthe

chargingbase isnotpluggedin

Ｍistake15:Huh,thechargingstandisthere?

10.Iftheproductwillnotbeusedforalongtime,pleasepowerofftheproduct(turnoffthe

powerswitch,unplugthepowercord).

Unknownfailure resultinginabnormal, itis

recommendedto restartthemachine

11.Beforediscardtheproduct,thebatteryoftheproductmustberemovedand withlocallaws

andregulations.

Whenafaultthat needstobeshutdown occurs,remind

theuserafter itoccurs,andthenautomatically shut

downorCharging

Ｍistake17:I'm outoforder.Turn itoffand

havearestme

12.Theproductcannotbeusedbychildrenundertheageof8orpeoplewithmentaldisabilities.

Ifyouneedtouseit,pleasedoitunderthesupervisionandguidanceofaguardian.Pleasedo

notletchildrenrideontheproductorplaywiththeproductasatoy.

Whenthebattery isextremelylowand notonthe

chargingdock, thecleaningistriggered (thebattery

islessthan10%)

Ｍistake18:Master, Ineedtorecharge

13.Useonlyindoorhomeenvironment,donotuseinoutdoor,commercialandindustrialsites.

14.Donotusetheproductininfantssleepingroom.

Ｍistake19:Can't shutdownonthe

chargingstand

Whencharging inthechargingstand, theshutdownis

triggered

15.Do notuse theproduct witha damaged chargeror powersocket. If theproduct

cannot worknormally due tofalling, damage, outdoor useor water,do notuse the

product.To avoid injury, theproduct should berepaired bythe manufacturer or

after-sales personnel.

Specifications /Parameters

16.Please use theproduct inaccordance with theinstructions inthe manual. ourcompany

willnot betresponsible forany lossand damagecaused byimproper use.

Voltage

19V

caveat

Battery

lithium battery

3000mAh

30w

！

1.Only theoriginal charging dock provided bythe manufacturer isapplicable. Itis

forbidden forthe userto change thebattery privately. Ifyou suspect thatthe battery is

damaged, please contact themanufacturer, authorized dealer oraprofessional insimilar

departments to replaceit.

Battery capacity

Power

Normal charging time

Battery lifetime

Single working time

3-4h

2.It isforbidden touse theproduct inan environment with openflames orfragile objects.

1000times

110-120min

3.Don’use theproduct in extremely hot(above 40℃) orcold(below 0deg.] C)

environment.

First charging time

Remote control type

4.It isforbidden toupt yourhair clothes,fingers andother parts intothe machine.

Phone APP

5.It isforbidden touse theproduct onwet orwatery ground.

Adapter inputvoltage

Charging type

100-240V

6.It isforbidden forthe product toabsorb anything thatmay block theproduct, such as

stones, wastepaper, etc.

Automatic charging

Button type

Prees button

0.45L

7.The product isforbidden toabsorb any flammable materials, suchas gasoline andtoner

forprinters or copies. Itisforbidden to usethe productin theareas with flammable

materials.

Dustbox capacity

Water tankcapacity

Appearance size

0.18L

8.It isforbidden forthe product toabsorb anyburning items, such ascigarettes, matches,

ashes andother itemsthat maycause afire.

35*35*10cm

3Kg

Model netweight

Sensor type

9.It isforbidden toplace objects inthe suction port.Do notusethe product whenthe

suction portis blocked. Cleanup thedust, lint,hair, etc. atthesuction port toensure

airintake isgood.

Infrared sensor

LDSlaser radar

Navigation option

navigation +infrared

sensor +gyroscope

10.Use thepower cordcarefully toavoid damage.It isforbidden to usethe powercord to

dragor liftthe product andproduct charging stand. Itisforbidden tousethe power cord

asahandle. It isforbidden toclamp the powercord inthe doorgap. Itisforbidden to

pullthe power cordatsharp corners andcorners. , andthe powercord should bekept

awayfrom heat sources.

Woodfloors, floor tiles,

marble, short-haired

carpet ...

Scope ofapplication

11.It isforbidden touse damaged charging dock.If thecharging dock isdamaged, it must

berepaired or replaced byprofessionals from themanufacturer, authorized dealer or

similar department inorder toavoid danger.

Input

19V

Output

12.It isforbidden toincinerate theproduct even whenthe producthas been severely

damaged. Thebattery of theproduct mayexplode as aresult.

Instructions for disposing ofbatteries

Ifyou wantto discardthe battery inthis machine, pleasedo notthrow it

awayalong with household garbage, buthand itover tothenearest waste

battery recycling station orour branchor after-sales service center for

centralized disposal.

Thefirmware upgrade is complete,

ready torestart

Robot isabout toreboot

Please putrobot onthe docking

station forsystem update

Themachine was notatthe charging

station whenthe upgrade started

Thefollowing description isnot forgeneral users, butfor thefinal disposal ofthebattery

disposal instructions.

Thechemical substances contained inthebattery built into thisunit willpollute the

environment. Before disposing of therobot, please takeout thebattery inthe fuselage in

advance. Thebattery should behanded over toaprofessional battery collection pointfor

centralized disposal.

Water tankisempty, please fill it

Safetymoduleerrorshappened,please

rebootrobot

Toexittheoperationmodefirst

Becareful! Leakage ofthebattery will cause humaninjury! If thebattery leaks, make

sureto avoidcontact with eyesor skin.In caseof accidental contact, please washyour

hands andeyes withclean waterimmediately. Ifyou stillfeel unwell, seekmedical attention

immediately.

Themachineneedstobeatthe

chargingstationbutitisn't

Startscheduledcleaning

Scheduleisset

Cleaningtimeintotheschedule

SetAIschedule

Removethe battery

Payattention to：

Restoreoriginalfactorysettings

Thefollowing information isonly applicable whendiscarding thisrobot, nota daily

operation instruction!

Please calibrate cliffsensors

Theanti-dropsensorisnotcalibrated

Laserbumperstuck

·Remove thebattery only whenthe powerin thebattery iscompletely exhausted. Don’t

letthe battery comein contactwith metal objects.

·Thesteps toremove the battery areasfollows:

·Letthe robot rununtil itiscompletely outofpower without touching thecharging stand

·Turn offtherobot power switch

Battery isnot working, pleasecheck

Authenticationkeyisnotfound

UUIDorAUTHKEYisnull

·Remove thescrews onthe battery cover

testaudio: 1kHz sinewave for1second Testtone

Whenthemachineneedstobemoved

outoftherestrictedarea

·Remove thebattery cover

·Pull outthe connector plugof thebattery andremove the battery.

Please moverobot outof thedocking Whenshuttingdown,themachineis

station before turn itoff stillinthechargingstation

Productcomposition/packinglist

A0023

Robotsweeper

InstructionManual

Mop

A0024

Bumper maybestuck, pleasecheck

Pressthe"clean"(partialmode)

Pressthe"clean"button(fixed-pointmode)

Whensuspended,recharge

Thepoweradapter

battery

(Installd in the machine)

Dustbox

(Installd in the machine)

Duringnon-cleaning,thebatteryisfound

tobeinsufficient

A0028

Lowbattery, please chargerobot

1piece

A0029

A0030

Cleaningiscompletedandnormalpower

Fully charged

Middlesweeping brush（Installedinthe machine）

Charging completed, resumethe last

cleaning

Fully chargedand notfinished last

cleaning

A0031

A0032

Whenperforming certain operations,

butfound that thebattery istoo low

A0033

A0034

A0035

A0036

Iamhere

Findthe machine through theapp

Enter QuickConnect Mode

Robotsweeper

Rechargedock

Thepoweradapter

Thefirmware upgrade has been

completed

A0037

A0038

A0039

A0040

A0041

A0042

Firmware upgrade failed

Wi-Fi connection succeeds

Wi-Fi connection failed

Setting succeeds

battery

(Installd in the machine)

Middlesweeping brush

sidebrush

(Installd in the machine)

A0043

A0044

Robotwill beturned off

Robot willbeturned off

Pressand holdspot buttonto set

current timeasschedule

Confirm AIscheduling time

Watertank

Mop

Dustbox

(Installd in the machine)

A0045

A0046

Confirm theAI scheduling function

Whenthe mapneeds tobe rebuilt

Tiltthe machine

Mapis incorrect, rebuild themap

A0047

A0048

Locating failed,rebuild themap

Failure tolocate, mapwill berebuilt

InstructionManual

Filterscreen

Productcomposition/partname

Voicepackets

Laser Sensor

FrontView

Start Button

Press the"clean" button

(automatic mode)

Charging Button

Whencleaning, pressthe "clean"

button orpause forother reasons

FlipLids

Whenpaused,pressthe"clean"button

Positioning failed during cleaning

Locating failed, stopcleaning

Anti-Impingement

sensor

Cleaninghasbeencompleted.Itneeds

toberechargedduetolowpower

Cleaning completed, start docking

Lowbattery, start docking

Infrared sensor

Cleaninghasbeencompleted.Itneeds

toberechargedduetolowpower

BackView

Sidebrush

Rechargebutcan'tfindthecharging

station

Robot cannotfind docking station

Anti-droping sensor

wheel

Relocating, please wait amoment

Wheels maybestuck, please check

Water tank

installation position

Anti-droping sensor

Recharging Contact

Sidebrush

Please placerobot onthe ground

Machinesarenotlaidflatontheground

Mainswipe stuck

Sidebrushmaybestuck,pleasecheck

Wheel

Water tank

installation position

Pleaseemptydustbinandcleanitsfilter

Dustbinisremoved,pleaseputitback

Dustbox isnot installed

Recharging Contact

Cardan Wheel

Batteryoverheated,robotwillbe

turnedoff

Thebattery is overheated

A0021

A0022

Suction port

Lidarsensormaybestuckorcovered,

pleasecheck

Theradar isobscured or stuck

Anti-droping sensor

Dust box

Operationaltest

project

TestCase

testenvironment

Criticalcheckpoint

Filter screen

1.Distributionnetworkfunction

QuickConnect

1.Turnonthesweeper,andwhenthesweeperprompts"enter

quickconnectionmode"

2.EntertheTuyaAPP,click"adddevice"or'+'>manuallyadd>small

appliances>sweepingrobot

3.FollowtheinstructionsoftheTuyaAPP,selectthe2.4GHzWi-Fi

networkandenterthepassword>Next

4.ClickonthetoprightoftheTuyaAPPandselect"Wi-FiQuick

Connect">checktoconfirmthattheindicatorlightflashes

quickly>Next

5.TheTuyaAPPshowsthatthedeviceisbeingaddedandconfirms

thatthesweepercanbeconnectedsuccessfully

HotspotDistributionNetwork

1.Turnonthesweeperandwaitforthesweepertoprompt"enter

hotspotnetworkdistributionmode"

2.EntertheAPP,click"adddevice"or'+'>manuallyadd>small

appliances>sweepingrobot

1.Quickconnection

distributionnetwork/

hotdistributionnetwork

WiFi

connection

Confirmthatthedistribution

networkfunctionisnormal

Suction port

3.FollowtheinstructionsoftheAPP,selectthe2.4GHzWi-Fi

networkandenterthepassword>Next

4.Change"Wi-FiQuickConnect"atthetoprightto"Hotspot

NetworkConfiguration">Checktoconfirmthattheindicator

lightflashesslowly>Next

Dustbox

5.ConnectthemobilephoneWi-Fitothedevicehotspot>goto

connect>selectthesweepertobeconnected>enterthe

password"xxxxxxxx">connect>press"Confirmtheconnection

tothehotspotiscorrect,continuetothenextstep"

6.TheAPPshowsthatthedeviceisbeingadded,confirmthatthe

sweepercanbeconnectedsuccessfully

2.Afterthesweeperissuccessfullyconnected,turnofftherouter,

wait5minutes,thenturnontherouter,andthenAPPclean,

confirmthatthesweepercanperformcleaning

1.Afterthesweeperandmobilephoneareconnectedtothe

network,placethesweeperatthechargingstationandsetthe

APPtimer.Whenthetimeisup,thesweeperwillautomatically

performcleaning

2.Afterthesweeperandmobilephoneareconnectedtothe

network,turnofftherouter,placethesweeperatthecharging

station,andsettheAPPtimer.Whenthetimeisup,thesweeper

willnotperformcleaning

1.Thereisinternet

confirmationtostart

cleaning

2.Cannotperform

scheduledcleaning

withoutinternet

Setuptheschedulewhenusing

theTuyaAPPplan.Ifthereisno

internet,itwillnotbeabletogo

outaccordingtotime

APP

schedule

setting

Pressthepaneltocleanat

anypoint,andthesweeper

willcleanat2m*2m,andit

willnotberechargedwhen

itstopsattheplaceafter

thesweep.

Suction port

Confirmthatthesweepercan

performfixed-pointcleaningat

anyposition

Anyspace

1.Cleaningatfixedpointsaccordingtothepaneland

observingthebehaviorofthesweeper

Designated

cleaning

Suction port

Anyspace

1.Swipethemaincardtodeath,clickthesweepbuttontoconfirm

thatthesweeperwillstopworking

2.Clickthesweepbutton,thesweeperiscleaning,holddownthe

sidebrushandconfirmthatthesweeperstopsworking

3.Ifthewheelisstuck,clickthesweepbuttontoconfirmthatthe

sweeperwillstopworking

Mainbrushovercurrent

protection

Sidebrushovercurrent

protection

Wheelovercurrent

protection

Overcurrent

protection

Thesweeperwillstopworking

andtherewillbevoiceprompts

Charging dock

Powercord

storagebox

Anyspace

Duringthecleaningprocessofthesweeper,manuallypressthe

frontgeartoconfirmthatthesweeperstopsworking

Frontgearcollisionsensor

anti-jammingprotection

Thesweeperwillstopworking

andtherewillbevoiceprompts

Anti-jam

protection

Charging

contact pin

Anyspace

Duringthecleaningprocessofthesweeper,covertheradarwith

objectstoconfirmthatthesweeperstopsworking

Occlusion

protection

Radarisblockedand

protected

Thesweeperwillstopworking

andtherewillbevoiceprompts

Status light

Thesweeperwillnotperform

work,andtherearevoice

prompts

Other

protection

Dustboxplacement

protection

Removethedustboxandobservewhetherthesweeperhasa

voiceprompt

Charging dock

bottom cover

Powersocket

Product use/precautions

Operationaltest

project

TestCase

testenvironment

Criticalcheckpoint

Arrangethefurnitureneatly

1.Powerbutton:longpressfor3seconds-poweron/off,shortpress

(whenthemachineispaused)-startglobalcleaning,shortpress

(whenthemachineisrunning)-pausecleaning,stoprecharging

2.Rechargebutton:shortpress(whenthemachineisrunning)-pause

shortpress(whenthemachineispaused)-Charging

3.Fixed-pointcleaningbutton:shortpress(whenthemachineis

paused)-performfixed-pointcleaninglongpress(onthecharging

station):schedule

Before eachuse, please arrangetables and chairsand other furniture and

sundries neatly, andorganize the largest cleaning space.

Powerbutton/recharge

button/fixed-pointcleaning

button/keycombination

function

and

Confirmthat thekeysare

functioning properly

Panel

buttons

4.Combinationkeys(powerkeyandfixed-pointcleaningkey):press

andhold for3secondsatthesametime-restorefactorysettings

5.Combinationkeys(powerkeyandrechargekey):shortpressatthe

sametime-cyclechangeofwindpower

Aliself-builtenvironment+IECroom

1.Startfromthecharging

station

2.Departfromanypointin

theenvironment(nomap)

3.Selectdifferentroom

scenes

1.Putthesweeperonthechargingstation,pressthecleaningbutton,

andwaitforthecleaningtobecompleted

2.Movethesweepertoanyposition,clickthecleaningbutton,and

waitforthecleaningtobecompleted(thesweeperandthe

chargingstationareplacedinthesameroom)

3.Movethesweeperandchargingstationtoanotherroomand

performcleaning

Confirmthatyoucancomplete

thefullmapcleaningandbuild

themap.Afterthecleaningis

completed,youcanreturnto

thechargingstationtocharge.

Mappingand

positioning

ability

1.Ali'sself-builtenvironment+IECroom,observethebehaviorofthe 1.Thedistancefromthewallis

1.Solidwall/skirting

board

2.APPvirtualwall/

restrictedareaboundary

sweeperalongthewall

about1.5cm

2.Walkalongthevirtualwall/

restrictedzoneboundary

2.UsetheAPPtosetupavirtualwallorrestrictedarea,clickthe

sweepbutton,andwaitforthesweeptocomplete

Abilityalong

thewall

3.Itneedstobetestedwithamagneticstripetoobservethebehavior 3.Explorewalkingalongtheedge

ofthesweeperalongthemagneticstripe

3.Magneticstripe

border

1.Rechargeafterstarting

Aliself-builtenvironment+IECroom

fromthechargingstation 1.Putthesweeperonthechargingstation,pressthecleaningbutton,

2.Donotstartfrom aftercleaningagain,presstherechargebutton

thechargingstation,then 2.Movethesweepertoanylocation,clickthesweepbutton,afterthe

Confirmthatthesweepercan

successfullyreturntothe

chargingstationforcharging

charging

mode

Exclude unfriendly obstacles

recharge

cleaningiscomplete,presstherechargebutton(thesweeperand

thechargingstationareinthesameroom)

Remove orblock slippers, floorfan baseand other lowobjects thatmay

affect thenormal workof theintelligent sweeping robot.

Walkingonadarkfloor

(testedwithsidebrushes),

atesttablewithaheight

ofXcmcannotbedropped

duringabatterycycle

Alitesttable(blacktabletop,whitefloor)(platformspecification

length*width*height=90cm*60cm*10cm,10cmhighisanL

-shapedwall)

Anti-drop

ability

Confirmthatthesweeperwill

notfalloffthetesttable

1.Willnotalwaysbearoundthe

longtablelegsandchairs,

unabletogetoutoftrouble

2.Willnotbestuckbynarrow

entrances

3.Cancrossthedoorintelligence

4.Youcangetoutoftroubleby

yourself,andtherewillbea

voicepromptifyougetstuck

5.Youcangetoutoftroubleby

yourself,andtherewillbea

voicepromptifyougetstuck

IECroomlayout

1.Longtablesandchairs

@IEClayout

2.Narrowentrance,

3.1.5cmgate,clouds

walkingbackandforth

4.Fanbase(IEC)/lampbase

(IEC)/barstoolbase(on-

sitetest)5.IECironrod

IECRoom

1.Placethesweeperonthechargingstationandclickthesweep

button.Duringthesweepingprocess,Observethebehaviorof

thesweeper

Abilityto

escape

1Onlywhenthebatteryis

higherthan35%canbe

cleanedfromthecharging

station

Aliself-builtenvironment

(1)Whenthesweeperisatthechargingstationandthepower

exceeds35%,pressthesweepbuttontoobservethesweeper

behavior

2Ifthebatterylevel

(2)Followingthepreviousstep,thesweeperwillcontinuetoclean.

Whenthepowerofthesweeperislessthan14%,thesweeper

willautomaticallyreturntothechargingstationforcharging

(3)Followingthepreviousstep,movethesweeperawayfromthe

chargingstationandturnoffthepowersupplyofthecharging

station.Clicktherechargebutton.Whenthesweeper’spoweris

5%,thesweeperwillautomaticallyshutdown.

Donot usethe mopfunction onthe carpet

Working

voltage

islowerthan15%,startthe

searchstationmode,ifthe

chargingstationcannotbe

foundwithin20minutes,

stopthesearchstation

3Automaticshutdownat

5%battery

Confirmthattheworking

voltageofthesweepermeets

thespecifications

Ifthe carpetin thehome hasfringe edge, pleaseFold thefringe of carpet

under thecarpet.

Definitionofworkinghours: AliOffice

Accelerationmode:90

minutes+/-10%

Normalmode:120minutes

+/-10%

Silentmode:150minutes

+/-10%,

Chargingtime:(battery

dischargedtofullcharge),

nomorethan5.5hours

(1)Placethesweeperonthechargingstation,switchthesuction

powertoturbomode,waitforthesweeper'spowertobe100%,

pressthesweepbutton,andletthesweepercontinuetocleanto

14%ofthepower,rechargebyitself,andrecordthecleaningtime

displayedbytheAPP(SwitchthesuctionpowertoNormalorSilent, 2.Confirmthechargingtime

afterthebatteryisfullycharged,performthecleaningworkagain,

andrecordthetime)

(2)Whenthebatteryisconsumedto5%,afterthesweeperis

automaticallyshutdown,putthesweeperonthechargingstation

andrecordthetimeittakesforthesweepertochargeto100%)

Working

hours

1.Confirmworkinghours

Putin thedust box:with thehandle ofthe dustbox, putthe dustbox

intothe machine compartment, and gentlypress the frontof thedust boxto

putthe handle upsidedown. Ifthe dustbox isnot placedin place,the handle

willbe difficult toput down,then takeout andreplay. (Seethepicturebelow)

4Prevent intelligent sweeping robot from falling

Ifthe sweeper isperforming tasks atthe entrance ofduplex stairs andthe

edgeof steps, pleaseplace protective guardrail to ensure itssafety and

smooth operation.

·Togglethebuckleonthefrontofthedustboxbyhandtoopenthedustbox

andtakeoutthefilter.(Seethepicturebelow)

5Block objects with strongreflective surfaces

Please makesure thatthere isno objectwith strong reflective surface within

8cmfrom theground; if so,please blockit toavoid affecting thedetection

andcleaning route ofthe intelligent sweeping robot.

Openthe lockof thedust boxand takeout thegarbage (Figure 1and Figure2).

Toavoid spilling thegarbage, please keep thedust boxupward, hold theupper

cover withyour righthand andthe transparent dust boxwith yourleft hand.To

avoid clogging ofthefilter, please knock thefliter whenpouring it out(it is

recommended to cleanit atleast onceaweek). After along periodof use,

remove thefilter components (Figure 3):dust screen; washable filter (Figure 4)

(recommended to replace asetof filterevery 6-12 monthsTo ensurea good

cleaning effect oftheequipment). Rinsethe dustbox andother filters (not

frequently, it isrecommended to cleanmonthly). be sureto waituntil thedust

boxand filter arethoroughly dried before using(Figure 5) toensure theirservice life.

(Strong lightwill interfere with thework ofthesweeper sensor)

reminder：

Whenusing forthe firsttime,please payattenion tothe intelligent sweeping

robotthroughout the wholeprocess tohelp theintelligent sweeping robot

eliminate someunfriendly small problems, sothatthe intelligentsweeping

robotcan cleansmoothly. When following theintelligent sweeping robot,

pleasepay attention nottoblock thesweeping robot

Cleanthe watertank

Productuse/accessoryinstallation

·Themopping function of theequipment only hasawiping effect, which ishelpful fordeep

cleaning, butcannot effectively removestubborn stains (such asdried coffee stains,etc.)

andcannot completely replace manual labor.

1Findasuitablelocationtoplacethechargingdock

*Thechargingdockisplacedagainstthewallandplacedonaflatground.Donotplaceobjects

within0.5mfromlefttorightand1.5minfrontofit.

·Pleaseusethemoppingfunctionwithcautionifthereisacarpetinyourhome.Inordernotto

stainyourcarpet,pleasedonotusethemoppingfunctiononthecarpet.Youcanpreventthe

devicefromenteringthecarpetareawithawatertankbysettingarestrictedareaontheTuyaAPP.

·Ifyouneedtoaddwatertothewatertankorcleanthemopduringtheequipmentwork,please

pauseinplace,lifttheequipmentatasmallangletoremovethewatertankcomponents,

reinstallthewatertankafteraddingwaterorcleaning,andputtheequipmentbackinplace.

Whenrestarting,theequipmentwillTrytofollowtheplannedpathtocontinueworking.

·Forsafetyreasons,besure toremovethewatertankcomponentofthedevice whencharging.

·Donotusethewatertanktomopthefloorwhennooneisathome.

*Ifthereisamirrororotherhighlyreflectiveobjectsnearthechargingdock,thebottom8cm

shouldbeshielded.(SeeFigure1below)

Figure1

Removethewatertank

Remove themop

Cleaning mop

2Installthesidebrushcorrectly

＊Payattentiontotheraisedsquareslotonthemountingpositionofthesidebrushisaligned

withthesquarerecessedholeonthesidebrush.Donotpressviolentlywhenmisaligned,

Drainthe water

Drythe watertank

Sun-dried mop

otherwisetheproductmaybedamaged.

Figure4

Install thewater

tankon thehost

Fasten thewater

tankplug

addwater

Mopinstalled

Clean thedust box

Takeout thedust box:lift theflip lids coveron therobot byhand, holdthe handle andlift

thedust boxup. (Seebelow)

Cleanside brush

3Middlesweepbrushinstallation

Foreignobjects (suchas hair)areeasily tangledinthe sidebrushand mayattached todust.

Makesure tocleanthem regularly.

*Firstinsert thefixed leftprotruding endandthen placeitinplace toreinstall themiddle

brush(Figure 5).

1Removethescrews mthascrewdriver,Carefully relaxandpull awayanyhair orstring

entangled betweenthemain bodyandthe sidebrush.(figure 1).

*Pressdown tolockthe brushcoverin place(Figure 6).

2Wipethedust offthebrush withaclothdampened withwarm waterorlightly reformthe

brush.(figure 2)

Figure5

Figure6

Figure1 Figure2

4Turnonandcharge

Cleanthe sensor

Note: Alignthe charging contact piece.Before charging, please wipe thecontact piece with

adry cloth.

·Cleaning ofanti-impingement sensors and anti-droping sensors

Usea cottonswab orsoft clothto cleanthe anti-impingement sensor andtheanti-

droping sensor.

*Placethemachineonthe chargingdockandaimitatthechargingcontact sheet.Thepower

indicatoronthechargingbase willchangefromontooff.Thedeviceis automaticallyturnedon

andchargingstartsbydefault. Afterthedeviceisturnedon,itcanbe usednormally(Figure7).

２

Theanti-impingement sensor islocated in frontof thesmart sweeper, andthe

transparent window with theanti-droping sensor is locatedat thebottom ofthe

smart vacuumcleaner. (Picture 3) (Picture 4)

Figure7

Inorder tomakethe smartsweeper moresensitive, please keep thetransparent

window ofthesensor clean.

Figure3

Figure4

Note: Ifthebattery cannot beturned on, pleaseplace thehost onthe charging dock,the

device willautomatically turnon, andthe deviceneeds 30% powerto worknormally.

2.Cannot perform scheduled cleaning without internet

2.press the

charge. placethe machine within onemeter directly infront ofthecharging dock. Click

button andthe devicewill automatically search for thecharging base andproceed

button, thedevice will automatically search forthe charging dockand goto

Setup theschedule when usingthe TuyaAPP plan.If thereis nointernet, it willnot be

ableto goout according tothetime.

the

tocharge.

·Payattenfion Afterthe sweeper andmobile phoneare connected tothe network, turn

offthe router, placethe sweeper atthe charging station, andsetthe APPto clean

regularly. When thetime isup,the sweeper willnot perform cleaning

*During thecleaning period, when thebattery islow, theintelligent sweeper will

automatically search for thechargingdock tocharge;

Cleaning andmaintenance

*Thesmartsweeperencountersobstaclesandreducedbatterypowerwhensearchingfor

therechargeabledock,andisaffectedbythecomplexenvironment,whichmaycause

thesmartsweepertofailtofindtherechargeabledock.Therefore,therechargeable

cdockshouldbeplacedinanopenplaceasmuchaspossible;

Cleaning middlebrush

1Asshow inthefigure, pull therelease tab tounlock thebrush cover.

*When the smart sweeper hasjust finished cleaning, the temperature ofthe battery is

generally higher. Atthis time, ifyou continue to charge, the time tofully charge will be

prolonged. (SeeFigure 8

2Liftthe rolling brushto removeit.

3Usescissors ora knifeto cleanrubbish and tangled hair.

4Firstinsert thefixedleft protrudingend, andthenplace itinplaceto reinstallthe middle

brush.

5Pressdownto lockthebrush coverinplace.

6Rotatetheroller brushbyhand toensurethat itisinplace androtates normally.

Figure8

Figure1

Figure2

Figure3

Figure4

Figure5

TuyaAPPconnection

Operationguide

Toturnitoff

1.Distributionnetworkfunction/fastconnectiondistributionnetwork

Longpress the”

“botton for3 secondson themachine tostart the machine. The

machine makesa sound,which means thepower hasbeen turned onandthe machine isin

standby state.

1.Turnonthesweeper,andwhenthesweeperprompts"enterquickconnectionmode"

Longpress ”

“botton for3 secondson themachine toturn off themachine the

machine willmake asound, indicating that thepower hasbeen turned off(as shownbelow).

2.DownloadTuyaAPPonyourphoneentertheTuyaAPP,click"AddDevice"or'+'>

ManuallyAdd>SmallHomeAppliances>RobotVacuum

3.FollowtheinstructionsoftheTuyaAPP,selectthe2.4GHzWi-Finetworkoffyourhomeand

enterthepassword>Next

4.ClickonthebottonoftheTuyaAPPandselect"Wi-FiQuickConnect">checktoconfirmthat

theindicatorlightflashesquickly>Next

2Cleaning/Pause

5.TheTuyaAPPshowsthatthedeviceisbeingadded,confirmingthatthesweepercanbe

connectedsuccessfully

Method 1:After thepower-on iscompleted, shortpress thebotton” “ on themain unit

tostart cleaning (press anykey topause duringcleaning).

Method 2:Click thecleaning button ofthe APPtostart cleaning (press thepause button to

pause thecurrent cleaning).

6.Ifyou failto connect thewifi. please the”

”botton and“ ”botton atthe same

timefor 3seconds.Next,please the”

After that,please retry the"1-5"step

“botton for3Seconds to turnoff thesweeper.

Note:

·Ifthepowerislessthan20%,themachine willnotbeperformed.Pleasechargeitbefore

startingcleaning.

2.Aftertheconnectionissuccessful,theconnectioncanberestoredafter

thenetworkisdisconnected,presstheAPPtoclean,andthesweeper

canperformcleaning

·Whenthepowerislessthan20%inthecleaningprocess,thedevicewillautomaticallyreturn

tothechargingdockforcharging;whenthepowerreaches80%,itwillautomaticallystart

cleaningatthebreakpoint.

TuyaAPPschedulesetting

·Pleasesortoutallkindsofwiresontheground(includingthepowercordofthecharging

dock)beforecleaning,soastoavoidpowerfailure,damageofitemsorwirescausedby

draggingduringcleaning.

·Afterthe sweeper andmobilephone areconnected to thenetwork, placethe sweeperat

thecharging station andsetthe APPtoclean regularly. Whenthe timeis up,thesweeper

willautomatically performthe cleaning

Cleanedareabefore

charging

Aftercharging,

Cleanthearea

Lackof

power

recharge

Cleanway

Designatedcleaning

Itis especially convenient when acertain areaneeds deepcleaning. Thesweeper willcome

tothe vicinity ofacertain point onthe mapdesignated by theuser, andtake thispoint as

thecenter toperform a 2m*2mrange cleaning. When operating onthemap, youcan drag

orclick toset thetarget point, whichis easyto operate.

Afterstarting, themachinewillscan andgeneratemapsand intelligentpartition. Inthepartition,

thecleaningpath willbeplannedby firstcleaningalongthe wallandthenfilling intheareato

completethecleaning ofeachpartition onebyone,whichis orderly,efficientand full

coveragewithout omission.Aftercleaning, thedevicewill automaticallyreturnto thecharging

baseforcharging (seethefigurebelow).

Note:Donotmove theequipmentrandomly orfrequentlyduring work.Aftermoving, please

placethedevice nearthesameplace. Whenitisrestarted, thedevicewilltryto relocateitsown

coordinates.If thepositioningissuccessful, itwillcontinue toworkaccording totheplanned

path.Ifthepositioning fails,the devicewillabandonthe previoustasktorebuild themapand

clean,andIt maycanseitfailtocharge bock.

Laserbuildmap

Sweepingalongthewall

Localcleaning

Whenthe device isoffline orthe mobilephone isnot around, youcan pressand holdthe

recharge button for3seconds, and thesweeper will focuson itselfand perform 2m*2m

cleaning. Theuser canmanually move tothe designated location forpartial cleaning.

Zigzagcleaning

Regularcleaning

UsetheAPPtosettheregularcleaningtime,themachinewillautomaticallystartcleaning

atthespecifiedtime,andautomaticallyreturntothechargingdocktochargeafterthecleaning

iscompleted.

Cleaningisover

FCC STATEMENT

1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

1.Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order

to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna

shall not be less than 20cm (8 inches) during normal operation

Intelligent Robotic Vacuum Cleaner

USER MANUAL

Thank youforpurchasing thisproduct, please

readthe manual carefully before usingit.

Xiaomi Intelligent Robotic Vacuum Cleaner User manual

Related papers

Other documents