V-ZUG 934 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the V-ZUG 934 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation instructions
Refrigerator FoodCenter FCP
J934.110-5
24.8.12 WIMA
4
These installation instructions apply to the model: 934
Refer to the operating instructions for specifications for the required mains voltage, current type and fuses.
3 m reinforced hose for water inlet on the back of the appliance (connection ¾" thread).
Water inlet pressure: min. 2 bar … 8 bar.
Installation in accordance with the supplied installation instructions.
Validity
This appliance is considered to be suitable for use in countries having a warm damp equable climate (WDaE). It may also be
used in other countries. If used in warm damp equable climated countries, the appliance is to be supplied through a residual
current device (RCD) having a rated residual operating current not exceeding 30 mA.
Electrical connections
Plumbing in
Install
* The installation height must be observed to ensure the ventilation of the appliance.
Customer connections (electricity, water inlet) must not be behind the appliance. It must be possible to pull out the appliance
from the niche at all times without dismantling furniture parts.
Installation
1756
1776*
910
610
910
695
635
8
387 515
920
720
343 464
1110-1300
1031
1159
761
695
min. 80–140 min. 120–250
610
Installation flush with front
Installation flush with housing
8
387 515
343
1031
65
90˚
90˚ 160˚
160˚
19 19
25
1159
464
610
761
695
/