Installation instructions
Cooltronic KC 60i Refrigerator
Built-in EURO 60
J928.051-4
17.2.12 WIMA
7
These installation instructions apply to the following models: 928
➤ Information on the necessary mains voltage, type of current and fuse protection can be taken from the identification plate.
Validity
This appliance is considered to be suitable for use in countries having a warm damp equable climate (WDaE). It may also be
used in other countries. If used in warm damp equable climated countries, the appliance is to be supplied through a residual
current device (RCD) having a rated residual operating current not exceeding 30 mA.
Electrical connections
Built-in, integratable door
* Allow a gap – at the top and bottom – less than the width of the appliance to ensure proper ventilation.
Shadow gaps alone – even if extended over several elements – are not sufficient.
=
=
100
225
min. 200 cm²min. 200 cm²
min. 4
a
min. 4
b
508 1270
a
16–20
min. 50
2/6
105
+2
0
+2
0
2050
Flush-mounted power socket, type 13
1778 = 14/6
Niche
600
Width of element
1776
Appliance
545
Appliance
Ventilation cross-section *
Door panels
1778 = 14/6
Niche
Positioned BELOW
also possible
Positioned ABOVE
standard
