Pottinger NOVACAT V 10000 Operating instructions

3880.en-US.80X.1

Original operating instructions

Mower combination

NOVACAT V 10000 /ED /RC /CF

/ED CL /RC CL

3880

Machine no.: +..00001

Technical changes

Since we are constantly working on the further development of our products, there may be

deviations between the product and this publication. Therefore, no claims can be derived

from the information, figures and descriptions. For binding information on the specific charac-

teristics of your machine, please contact your service dealer.

Legal information

Please note that only the German operating instructions are the original operating instruc-

tions within the meaning of Directive 2006/42/EC. Operating instructions that are available in

languages other than German are translations of the original German operating instructions.

Please understand that changes to the scope of delivery in terms of form, equipment and

technology are possible at any time.

Reprinting, translation and reproduction in any form, including excerpts, require the written

consent of PÖTTINGER Landtechnik GmbH.

All rights under copyright law are expressly reserved by PÖTTINGER Landtechnik GmbH.

MyPÖTTINGER – Easy. Anytime. Everywhere.

• Scan the QR code from the type plate with a smartphone / tablet or enter www.mypoet-

tinger.com on the Internet.

• Spare parts lists are available exclusively via MyPÖTTINGER.

• Individual information, such as operating instructions and maintenance information for

your machines, is available on MyPÖTTINGER in “My Machines” at any time after regis-

tration.

2 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Dear customer,

Quality is value that pays for itself. Therefore, we apply the highest quality standards to our

products, which are continuously monitored by our in-house quality management and by our

management. Because safety, flawless function, the highest quality and absolute reliability of

our machines in operation are our core competencies for which we stand.

These operating instructions are intended to facilitate getting to know your machine, and pro-

vide you with clear information on safe and proper handling, care and maintenance. There-

fore, please take some time to read the instructions.

These operating instructions are part of the machine. They must be kept in a suitable loca-

tion during the entire service life of the machine and must be accessible to personnel at all

times. Instructions on the basis of existing national regulations on accident prevention, traffic

regulations and environmental protection must be added.

All personnel charged with the operation, maintenance or transport of the machine must

have read and understood these instructions, in particular the safety instructions, before

starting work. Failure to follow these instructions will void the warranty.

If you have any questions regarding the contents of these operating instructions or any other

questions about this machine, please contact your PÖTTINGER service partner.

Timely and conscientious care and maintenance according the established maintenance in-

tervals will ensure operational and traffic safety as well as the reliability of your machine.

Only use original spare parts or spare parts and accessories approved by PÖTTINGER

Landtechnik GmbH. Only the original spare parts approved by us have been tested by us

and thus fulfill the suitable prerequisites for use in your machine. If unapproved parts are

used, the guarantee or warranty claim will be lost. Even after the warranty period has ex-

pired, we recommend using original spare parts to ensure the continuous performance of the

machine.

The product liability law obligates the manufacturer as well as the dealer to hand over in-

structions when selling machines and to train the customer on the machine by referring to the

safety, operating and maintenance instructions. A confirmation in the form of a delivery dec-

laration is required to prove that the machine and the instructions have been handed over

properly. The delivery declaration is filled out electronically by the dealer.

According to product liability law, every self-employed person and farmer is an entrepreneur.

Entrepreneurial property damage is therefore excluded from liability by PÖTTINGER accord-

ing to product liability law. Property damage within the meaning of product liability law is

damage caused by a machine, but not to it.

The operating instructions are part of the machine, therefore hand them over to the new own-

er when passing on the machine. Train the new owner, and refer the owner to the aforemen-

tioned instructions.

Your PÖTTINGER service team wishes you much success.

3880.en-US.80X.1 Original operating instructions /ED CL /RC CL | 3

Presentation conventions

This section contains explanations for a better understanding of the figures, safety instruc-

tions, warnings and textual descriptions used in these operating instructions.

Safety instructions / warnings

Safety instructions of a general nature are always at the beginning of a section. They warn of

dangers that may arise during operation of the machine or during preparations for work on

the machine. Warnings warn of dangers that may arise immediately during a procedure or

work step on the machine. Warnings are listed together with the respective procedures /

work steps in the instructional text.

Safety instructions and warnings are presented as follows:

DANGER

If the instructions in a text section marked in this way are not followed, there is a risk

of fatal or life-threatening injury.

► Make sure to follow all instructions in such text sections!

WARNING

If the instructions in a text section marked in this way are not followed, there is a risk

of serious injury.

► Make sure to follow all instructions in such text sections!

CAUTION

If the instructions in a text section marked in this way are not followed, there is a risk

of injury.

► Make sure to follow all instructions in such text sections!

NOTICE

If the instructions in a text section marked in this way are not followed, there is a risk

of property damage.

► Make sure to follow all instructions in such text sections!

TIP

Text sections marked in this way contain recommendations and tips for handling the ma-

chine.

ENVIRONMENT

Text sections marked in this way contain information on the topic of environmental protec-

tion.

Directional information

Directional information (such as left, right, front, rear) is given based on the normal “working

direction of travel” of the machine.

4 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Orientation information for a figure of a machine detail, refers to this figure itself and is only

understood as relative to the direction of travel occasionally. The meaning of the orientation

information (if required), is clear from the accompanying text itself.

Designations

In these operating instructions, the existing interchangeable equipment for agricultural vehi-

cles (according to European Directive 2006/42/EC) is referred to as the machine.

Vehicles intended for driving the existing machine are referred to as tractors.

Equipment designated as optional is only offered on certain machine versions or only in cer-

tain countries.

Cross-references

Cross-references to another place in the operating instructions or another document are in

the text, with specification of the chapter and subchapter or section. The name of the sub-

chapter or section is in quotation marks. (Example: Check all screws on the machine for

tightness. See “Tightening torques” on page xxx.) The subchapter or section can also be

found in the document via an entry in the table of contents.

Action steps

An arrow or sequential numbering indicates action steps that should be performed.

A black-bordered indented arrow or sequential indented numbering indicates intermedi-

ate results or intermediate steps that should be performed.

Figures

Figures may differ in detail from your machine and are to be understood as a schematic dia-

gram/symbolic illustration.

Use of colors

Figures in this printed document supplied by PÖTTINGER Landtechnik GmbH are shown ex-

clusively in grayscale or black and white.

Figures in electronically distributable documents (PDF) are also displayed in color and can

be printed in color if required.

Use of symbols

Figures may contain additional inserted symbols, arrows and other lines that are used to im-

prove the comprehensibility of the image content, or are intended to draw attention to a spe-

cific area of the image.

3880.en-US.80X.1 Original operating instructions /ED CL /RC CL | 5

Product delivery instructions

Please check the points listed according to the product liability obligation.

Please mark with a cross where applicable.

Machine checked according to delivery note. All enclosed parts removed; all safety

equipment, cardan shaft and operating equipment present.

Operation, commissioning and maintenance of the machine or device discussed

and clarified with the customer based on the operating instructions.

Tires checked for correct air pressure.

Wheel nuts checked for tight fit.

Correct PTO shaft speed and direction of rotation pointed out.

Adjustment to the tractor performed; three-point adjustment, drawbar height, hand-

brake lever attachment in the tractor cab, forced steering linkage adjusted, compati-

bility of all required electrical, hydraulic and pneumatic plug connections to the trac-

tor checked and established.

Cardan shaft correctly cut to length.

Test run of all machine functions as well as parking brake and service brake per-

formed and no defects found.

Function explanation during test run.

Swinging into transport and working position explained.

Information about desired or additional equipment given.

Information on required reading of the operating instructions given.

A confirmation is required to prove that the machine and the operating instructions have

been handed over properly. For this purpose, you have received a confirmation email from

PÖTTINGER. If you have not received this email, please contact your local dealer. Your

dealer can fill out the delivery declaration online.

Austria

PÖTTINGER Landtechnik GmbH

Industriegelände 1

4710 Grieskirchen

Phone+43 7248 600-0

Fax+43 7248 600-2513

[email protected]

6 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Screw tightening torques factory standard

Screw tightening torques................................................................................................... 16

Design and function

Functional elements.......................................................................................................... 17

Included accessories......................................................................................................... 18

Retrofit program................................................................................................................ 18

At a glance

Labeling............................................................................................................................. 19

Type plate with CE mark............................................................................................. 19

Description

Declaration of conformity.................................................................................................. 20

Intended use..................................................................................................................... 21

Improper use..................................................................................................................... 21

Technical data

Dimensions....................................................................................................................... 22

Weights............................................................................................................................. 22

Basic settings.................................................................................................................... 22

Mower discs and mower blades........................................................................................ 23

Power requirement............................................................................................................ 25

Hydraulic system............................................................................................................... 25

Select Control.............................................................................................................. 26

Power Control / ISOBUS............................................................................................. 26

Electrical system............................................................................................................... 27

SELECT CONTROL terminal...................................................................................... 27

POWER CONTROL terminal....................................................................................... 27

EXPERT 75 terminal................................................................................................... 28

Terminal CCI 1200...................................................................................................... 28

Noise emission.................................................................................................................. 29

Safety and environment

Safety instructions............................................................................................................. 30

Qualification of the personnel............................................................................................ 30

Content

3880.en-US.80X.1 Original operating instructions /ED CL /RC CL | 7

Performing maintenance work.......................................................................................... 30

Organizational measures.................................................................................................. 30

Ensuring operational safety............................................................................................... 31

Special dangers................................................................................................................ 32

Operational danger zone................................................................................................... 33

Warning signs................................................................................................................... 34

Traffic safety equipment.................................................................................................... 37

Handling hazardous substances....................................................................................... 40

Fuel efficiency and soil protection..................................................................................... 40

Disposal of the machine.................................................................................................... 41

Select Control terminal

SELECT CONTROL terminal overview............................................................................. 42

Input keypad................................................................................................................ 42

SELECT CONTROL operation

Input masks....................................................................................................................... 44

Selection masks................................................................................................................ 46

Structure of the control system......................................................................................... 47

START screen................................................................................................................... 49

Pop-up messages............................................................................................................. 51

Calling up the “WORK” menu............................................................................................ 55

SET menu......................................................................................................................... 60

1.1 Front mower - overview......................................................................................... 60

2.1 Display of the lifting height..................................................................................... 61

2.2 Lifting..................................................................................................................... 62

1.3 Relief..................................................................................................................... 63

2.3 Cross conveyor belt............................................................................................... 65

3 Speed signals........................................................................................................... 66

Service menu.................................................................................................................... 67

DATA menu....................................................................................................................... 69

Data menu - complete display..................................................................................... 69

Data menu - order display........................................................................................... 70

Test menu......................................................................................................................... 73

Test menu 1.1 - job computer...................................................................................... 73

Test menu 1.2 - CAN IO module................................................................................. 74

Test menu 2 - sensors................................................................................................. 75

Content

8 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Test menu 3 - lifting..................................................................................................... 76

Test menu 4 - lateral displacement............................................................................. 78

Test menu 4 - swath merging...................................................................................... 79

Error list....................................................................................................................... 81

Configuration menu........................................................................................................... 83

Configuration menu 1.1 - general................................................................................ 83

Configuration menu 1.2 - serial number...................................................................... 85

Configuration menu 2.1 - factory settings.................................................................... 86

Configuration menu 6 - developer mode..................................................................... 87

Configuration menu 4.1 - emergency operation.......................................................... 88

Configuration menu 5 - manual operation................................................................... 89

Configuration menu 5.1 manual operation - side guard folding........................................ 89

Configuration menu 5.2 - manual operation - mower........................................................ 91

Configuration menu 5.3 - manual operation - lateral displacement................................... 92

Configuration menu 5.4 - manual operation - collector..................................................... 94

Configuration menu 6.1 - calibrate lateral displacement............................................. 96

Configuration menu 6.2 - calibrate lifting / lowering..................................................... 97

Configuration menu 6.3 - pressure settings................................................................. 99

POWER CONTROL terminal operation

POWER CONTROL terminal overview............................................................................. 102

Input keypad................................................................................................................ 102

EXPERT 75 ISOBUS terminal

EXPERT 75 terminal overview.......................................................................................... 104

Input keypad................................................................................................................ 104

CCI ISOBUS terminal

CCI 1200 terminal overview.............................................................................................. 106

ISOBUS operation

Input masks....................................................................................................................... 107

Selection masks................................................................................................................ 109

Structure of the control system......................................................................................... 110

START screen................................................................................................................... 113

Calling up the “WORK” menu............................................................................................ 115

Operation: Transport menu......................................................................................... 122

Content

3880.en-US.80X.1 Original operating instructions /ED CL /RC CL | 9

SET menu......................................................................................................................... 122

1.1 Front mower - overview......................................................................................... 123

1.2 Settings for time and path-dependent lifting and lowering..................................... 124

2.1 Side guard folding.................................................................................................. 125

2.2 Display of the lifting height..................................................................................... 127

2.3 Lateral displacement............................................................................................. 128

2.4 Adaptive hydraulic relief........................................................................................ 129

2.5 Cross conveyor belt............................................................................................... 131

2.6 Automatic grease lubrication................................................................................. 133

4.1 GPS....................................................................................................................... 135

4.2 Section control....................................................................................................... 136

3 Speed signals........................................................................................................... 137

5 Emergency operation............................................................................................... 139

Softkey assignment..................................................................................................... 140

Service menu.................................................................................................................... 142

DATA menu....................................................................................................................... 143

Data menu - complete display..................................................................................... 143

Data menu - year display............................................................................................. 144

Data menu - order display........................................................................................... 146

Test menu......................................................................................................................... 149

Test menu 1.1 - sensors.............................................................................................. 149

Test menu 1.2 - mower................................................................................................ 150

Test menu 1.3 - lateral displacement.......................................................................... 152

Test menu 1.4 - collector............................................................................................. 154

Test menu 1.5 - relief................................................................................................... 155

Test menu 2 - ECU...................................................................................................... 157

Error list....................................................................................................................... 158

Configuration menu........................................................................................................... 160

Configuration menu 1.1 - general................................................................................ 161

Configuration menu 2.1 - calibrate lateral displacement............................................. 162

Configuration menu 2.2 - calibrate lifting / lowering..................................................... 164

Configuration menu 3 - terminal-based manual operation.......................................... 166

Configuration menu 3.1 terminal-based manual operation - side guard folding................ 167

Configuration menu 3.2 terminal-based manual operation - mower................................. 169

Configuration menu 3.3 - manual operation - lateral displacement................................... 171

Configuration menu 3.4 - manual operation - relief........................................................... 173

Configuration menu 3.5 - manual operation - collector..................................................... 174

Configuration menu 4 - serial number......................................................................... 176

Content

10 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Configuration menu 5 - factory setting......................................................................... 177

Configuration menu 6 - developer mode..................................................................... 178

Flaps / cover / auxiliary equipment

Auxiliary equipment........................................................................................................... 180

Crossflow tailgate manual operation........................................................................... 180

Protective apron carrier operation............................................................................... 184

Parking supports operation.......................................................................................... 188

Operation

Commissioning.................................................................................................................. 194

Coupling............................................................................................................................ 194

Attachment to the tractor............................................................................................. 195

Connecting the tractor terminal................................................................................... 197

Assembling the SELECT CONTROL terminal............................................................. 197

Assembling the POWER CONTROL terminal............................................................. 198

Assembling the EXPERT 75 ISOBUS terminal........................................................... 199

Assembling the EXPERT 100 (CCI-100) terminal....................................................... 200

Assembling the CCI 1200 terminal.............................................................................. 201

Tractor ballasting............................................................................................................... 202

Determining the tractor ballasting through the weighing method................................ 203

Determining the tractor ballasting through calculation................................................. 205

Setting / conversion........................................................................................................... 206

Lower linkage setting................................................................................................... 206

Prerequisites for commissioning a cardan shaft.......................................................... 210

Disassembling / remounting the conveying cone........................................................ 212

Hydraulic collision protection release force setting...................................................... 214

Rear power lift height position..................................................................................... 215

Hydraulic relief setting, Select Control variant............................................................. 217

Cutter bar position setting............................................................................................ 221

Connecting / disconnecting the connecting lines from the front mower...................... 223

Conditioner (option)..................................................................................................... 223

Roller conditioner settings................................................................................................. 223

Tine conditioner settings................................................................................................... 228

Switch from conditioner to swath former........................................................................... 233

Switch from swath former to conditioner........................................................................... 238

Collector (option)......................................................................................................... 240

Content

3880.en-US.80X.1 Original operating instructions /ED CL /RC CL | 11

Cross Flow (option)..................................................................................................... 251

Swath former (option).................................................................................................. 256

Swath comb (option).................................................................................................... 259

Starting work..................................................................................................................... 260

Turning maneuvers on a slope.................................................................................... 261

Reversing.......................................................................................................................... 261

Establishing the working position................................................................................ 262

Mowing........................................................................................................................ 263

Collision protection triggering / resetting..................................................................... 264

Transport journeys....................................................................................................... 265

Disconnection.................................................................................................................... 268

Disconnecting the cardan shaft................................................................................... 268

Uncoupling the machine from the tractor..................................................................... 269

Removing the CCI 1200 terminal................................................................................ 271

Removing the EXPERT 100 terminal.......................................................................... 272

Removing the EXPERT 75 terminal............................................................................ 273

Removing the POWER CONTROL terminal............................................................... 274

Removing the SELECT CONTROL terminal............................................................... 274

Disconnecting the tractor terminal............................................................................... 275

Decommissioning the machine at the end of the season.................................................. 275

Maintenance

Maintaining operational readiness.................................................................................... 276

General notes.................................................................................................................... 276

Cardan shaft...................................................................................................................... 277

Equipment table................................................................................................................ 278

Condition-based maintenance

Disassembling / remounting the reversible mower blades................................................ 280

Replacing the roller conditioner belts................................................................................ 283

Replacing the tine conditioner drive V-belt........................................................................ 284

Tine conditioner tines and tine fasteners assembly work.................................................. 287

Tine conditioner rotor tines installation positions.............................................................. 292

Replacing the Crossflow drive V-belt................................................................................ 293

Filling the central lubrication lubricant container............................................................... 295

Setting the cross conveyor belt sensors........................................................................... 296

Content

12 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Predetermined maintenance

Before each season.......................................................................................................... 299

Checking the friction clutch.......................................................................................... 299

Checking the cardan shaft cam clutch......................................................................... 299

Making input gearbox overrunning clutches “run smoothly”........................................ 300

Daily maintenance............................................................................................................. 300

Checking the hydraulic system.................................................................................... 301

Checking / replacing lighting bulbs.............................................................................. 302

Checking / replacing warning signs, warning triangles, warning foils.......................... 303

Once after 1 hour.............................................................................................................. 305

Checking the seat of the taper bushings..................................................................... 305

Tightening the blade screws........................................................................................ 306

After 5 hours, after 10 hours, then every 20 hours............................................................ 308

Correcting the cross conveyor belt run........................................................................ 308

Once after 8 hours............................................................................................................ 310

Checking / correcting the conditioner drive tension pulley run.................................... 310

Every 20 hours.................................................................................................................. 312

Checking / correcting the Cross Flow belt tension...................................................... 312

Crossflow cleaning...................................................................................................... 313

Every 50 hours.................................................................................................................. 313

Conditioner primary drive cleaning.............................................................................. 313

Lubricating the roller conditioner roller bearings.......................................................... 314

Mower blade holder wear check.................................................................................. 315

Lubricating the Crossflow............................................................................................ 317

Lubricating the roller conditioner................................................................................. 318

First after 50 hours, then every 100 hours........................................................................ 319

Checking / correcting the roller conditioner V-belt tension.......................................... 319

Every 100 hours................................................................................................................ 321

Roller conditioner cleaning.......................................................................................... 321

Every 150 hours................................................................................................................ 321

Lubricating the cutter bar drive shafts......................................................................... 321

Every 300 hours................................................................................................................ 323

Cutter bar oil change................................................................................................... 323

Changing the roller conditioner gear oil....................................................................... 324

Changing the Crossflow input gearbox oil................................................................... 326

Changing the mower input gearbox oil........................................................................ 328

Changing the cutter bar input gearbox oil.................................................................... 331

Content

3880.en-US.80X.1 Original operating instructions /ED CL /RC CL | 13

Changing the roller conditioner gear oil....................................................................... 333

1x annually........................................................................................................................ 335

Checking / filling up the cutter bar oil level.................................................................. 335

Checking / filling up the Crossflow input gearbox oil level........................................... 338

Checking / correcting the mower input gearbox oil level............................................. 339

Checking / filling up the cutter bar input gearbox oil level........................................... 341

After each season (winter storage)................................................................................... 343

Cleaning / preserving the machine.............................................................................. 343

Every 4 years.................................................................................................................... 344

Checking / refilling the hydraulic pressure accumulator.............................................. 344

Every 6 years.................................................................................................................... 345

Replacing the hydraulic hoses..................................................................................... 345

Lubrication schedules....................................................................................................... 346

Operating fluids

Operating fluid specification.............................................................................................. 348

Operating fluids and fill quantities..................................................................................... 348

Advice and support

Cardan shaft cam clutch function...................................................................................... 350

What to do if ..................................................................................................................... 350

Lighting........................................................................................................................ 350

Conditioner blockages................................................................................................. 351

Removing Cross Flow blockage.................................................................................. 354

Select Control emergency operation........................................................................... 355

Power Control emergency operation........................................................................... 358

Vibrations during mowing operation with the tine conditioner..................................... 360

Schedules

Electrical system............................................................................................................... 362

Select Control.............................................................................................................. 362

Power Control.............................................................................................................. 363

Hydraulics......................................................................................................................... 369

Select Control.............................................................................................................. 369

Power Control.............................................................................................................. 372

Content

14 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Supplement to the USA / CANADA operating instructions

USA / CANADA English warning signs............................................................................. 374

Safely towing loads........................................................................................................... 380

Content

3880.en-US.80X.1 Original operating instructions /ED CL /RC CL | 15

Screw tightening torques

This factory standard applies to all metric screws for which no special tightening torque is

specified in the drawing/instructions. The respective strength class can be seen on the screw

head.

• The values specified are nominal values and apply to a head friction coefficient of

IJ=0.14 and a thread friction of IJ=0.125. Slight deviations of the clamping force due to

different friction coefficients may occur. The values listed must be observed with a toler-

ance of ± 10%.

• If the specified tightening torques are used and the friction coefficients used are present,

the screw material is stressed to 90% of the minimum yield strength according to DIN

ISO 898.

• If a special tightening torque is specified for a screw connection, all of these screw con-

nections must be tightened with a torque wrench and the specified tightening torque.

Metric thread Strength class 8.8 Strength class 10.9

Tightening torque Clamping force Tightening torque Clamping force

M 4 3,1 Nm 4000 N 4,4 Nm 5700 N

M 5 6,2 Nm 6600 N 8,7 Nm 9300 N

M 6 10,5 Nm 9300 N 15 Nm 13000 N

M 8 25 Nm 17000 N 36 Nm 24000 N

M 10 50 Nm 27000 N 70 Nm 38000 N

M 12 86 Nm 39500 N 121 Nm 56000 N

M 14 135 Nm 54000 N 195 Nm 76000 N

M 16 215 Nm 75000 N 300 Nm 105000 N

M 20 410 Nm 117000 N 580 Nm 164000 N

M 24 710 Nm 168000 N 1000 Nm 237000 N

M 30 1400 Nm 270000 N 2000 Nm 380000 N

M 8 x 1 27 Nm 18700 N 38 Nm 26500 N

M 10 x 1.25 53 Nm 29000 N 74 Nm 41000 N

M 12 x 1.25 95 Nm 44500 N 130 Nm 63000 N

M 14 x 1.5 150 Nm 60000 N 210 Nm 85000 N

M 16 x 1.5 230 Nm 81000 N 320 Nm 115000 N

M 20 x 1.5 460 Nm 134000 N 650 Nm 189000 N

M 24 x 2 780 Nm 188000 N 1090 Nm 265000 N

Screw tightening torques factory standard

16 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Functional elements

Name and function

Pos. Element Function

1 Mounting frame Attachment to the tractor / base for hydraulic system

and electrical system.

2 Parking supports -

front

Parking the machine without a tractor.

3 Inner guard Protection against foreign objects flying away.

4 Front guard

5 Outer guard

6 Tine conditioner / roll-

er conditioner / Cross-

flow / Collector

Options for conditioning the mowed material and swath

merging as required.

7 Hydraulic working

width adjustment

Manual and optional automatic curve and slope com-

pensation.

8 Boom Foldable carrier of the mower units with integrated re-

lief and collision protection.

8 Rear warning signs

with lighting

Lighting equipment for driving on public traffic areas,

depending on country of destination.

9 OI box Contains the operating instructions, spare parts list

10 Parking supports -

rear

Parking the machine without a tractor.

11 Warning signs - rear -

with lighting

Lighting equipment, depending on the legal require-

ments in the country of destination

Without

figure

Swath former / addi-

tional swath former

Can be retrofitted for the formation of higher / narrower

swaths without conditioning.

Without

figure

High cut skids Can be retrofitted on the underside of the cutter bar for

more distance between the knives and the ground.

TIP

Elements with designations such as “left” and “right” are present on both sides of the ma-

chine.

Design and function

3880.en-US.80X.1 Original operating instructions /ED CL /RC CL | 17

Included accessories

• 1 set of spare V-belts for each Crossflow unit. The V-belts are packed in the discharge

of the screw conveyor of both Crossflow units.

• Operating instructions, spare parts list

• Knife box (2)

Retrofit program

The retrofit program of PÖTTINGER Landtechnik GmbH offers a wide range of retrofit op-

tions. Your service dealer will be pleased to provide you with further information.

Design and function

18 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Labeling

Type plate with CE mark

T = Type plate position

Type plate

Before an inquiry about the machine or technical issues, read the model and type from the

type plate and have it ready. Chassis no. and/or serial no. are absolutely necessary for or-

dering spare parts.

CE mark

The CE mark on the type plate confirms the conformity of the machine with the provisions of

the machinery directive (version valid at the time the machine was placed on the market).

Data included

The following data can be read on the type plate, depending on the machine type and de-

sign.

Data Data

Chassis number Year of manufacture

Model Model year

Vehicle identification number Axle loads per axle

Type Drawbar load

Serial number Permissible total weight

Base weight

At a glance

3880.en-US.80X.1 Original operating instructions /ED CL /RC CL | 19

Declaration of conformity

Description

20 | Original operating instructions /ED CL /RC CL 3880.en-US.80X.1

Page is loading ...

Pottinger NOVACAT V 10000 Operating instructions

This manual is also suitable for

Pottinger NOVACAT V 10000 Operating instructions

Related papers

Other documents