Invacare Solo 2 Quick Reference Manual

Brand: Invacare

Model: Solo 2

Type: Quick Reference Manual

SOLO

™ Quick Reference Guide 1 Part No 1163220

NAVIGATING THE SOLO

™ LCD SCREEN

QUICK REFERENCE GUIDE

NOTE:Thisguideismeanttobeusedonlyasabrief,general

reference.Forcompleteoperatinginstructions,alwaysrefer

totheOperator’sManual.

Turning Concentrator On/Off

NOTE:Forthisprocedure,refertoFIGURE1.1.

1. ToturntheSOLO

concentratoron,pressandholdthe

On/Offbuttonuntilthethreewarninglightsdisplay

andtheunitbeeps.

2. ToturntheSOLO

concentratoroff,pressandholdthe

On/Offbutton .

NOTE:GREENlightwillflashandyouwillhearthemachinestop

running.

FIGURE 1.1 Turning Concentrator On/Off

Menu Screens Navigation

NOTE:Forthisprocedure,refertoFIGURE1.1.

1. Afterturningonunit,pressandholdtheReturn/Highlight

Button toscrollthroughthethreeSOLO

concentrator

menuscreens.

NOTE:ScreenswillcontinuescrollinguntiltheReturn/Highlight

Buttonisreleased.

Normal Operating/Standby Screen

TheNormalOperating/Standbyscreenshowseitherbattery

strengthgauge,fanoperating,externalpoweronandbattery

chargingicons,whenapplicable,orthecurrent/lastmodeof

operationandoutputflowlevelselected.

On/Off

Button

Return/Highlight

Button

Part No 1163220 2 SOLO

™ Quick Reference Guide

LCD Adjust Screen

TheLCDAdjustscreenallowsusertochangethebrightness

andcontrastofthescreen(FIGURE1.2).

FIGURE 1.2 LCD Adjust Screen

LCD Adjust Screen Navigation

NOTE:Forthisprocedure,refertoFIGURE1.2.

1. Performoneofthefollowing,whiletheLCDAdjustscreen

isdisplayed:

A. TaptheReturn/HighlightButton tomovetheblack

highlightbarfromlefttoright,orrighttoleft.

B. TaptheUp/IncreaseButtonortheDown/Decrease

Buttonwhiletheblackhighlightbarisonthe

“LEFTSIDE”ofthescreentomovethehighlightbarup

ordown.

C. TaptheUp/IncreaseButtonorDown/Decrease

Buttonwhilethehighlightbarisonthe“RIGHT

SIDE”ofthescreentochangethevalueoftheitem

highlighted.

D. HolddowntheReturn/HighlightButton to

continuescrollingthroughthethreemenuscreens.

NOTE:Ifnobuttonsarepressedforapproximately10seconds,the

screenwillchangebacktotheStandby/NormalOperatingscreen.

AnychangesmadewillNOTbesaved.

Return/Highlight

Button

Up/Increase

Button

Down/Decrease

Button

SOLO

™ Quick Reference Guide 3 Part No 1163220

2. TosavechangesmadeontheLCDAdjustscreen:

A. PressandholdtheReturn/HighlightButton untila

differentscreenappears.

Mode & Flow Adjust Screen

TheMode&FlowAdjustscreenallowsusertochangethe

currentmodeofoperationandoutputflow(FIGURE1.3).

FIGURE 1.3 LCD Adjust Screen

Changing Mode

NOTE:Forthisprocedure,refertoFIGURE1.3.

1. PressandholdtheReturn/HighlightButtonuntilthe

Mode&FlowAdjustscreenappears.

NOTE:Verifythat“MODE”ishighlightedbytheblackhighlight

barbeforeproceeding.

2. TaptheReturn/HighlightButtontomovethehighlight

bartotheright.Thecurrentmode(“CONTINUOUS”or

“PULSE”)shouldnowbehighlighted.

A. If“CONTINUOUS”ishighlighted,pressthe

Down/DecreaseButtontochangethemodeto

“PULSE”.

B. If“PULSE”ishighlighted,presstheUp/Increase

Buttontochangethemodeto“CONTINUOUS”.

3. TosavechangesmadeontheMode&FlowAdjustscreen:

A. PressandholdtheReturn/HighlightButtonuntila

differentscreenappears.

Return/Highlight

Button

Up/Increase

Button

Down/Decrease

Button

Adjusting Flow

NOTE:Forthisprocedure,refertoFIGURE1.3.

1. PressandholdtheReturn/HighlightButtonuntilthe

Mode&FlowAdjustscreenappears.

2. TaptheDown/DecreaseButtontomovethehighlight

bardown.“FLOW”shouldnowbehighlighted.

3. TaptheReturn/HighlightButtontomovethehighlight

bartotheright.Thecurrentflowrateshouldnowbe

highlighted.

4. TapDown/DecreaseButtontodecreaseflow,ortapthe

Up/IncreaseButtontoincreaseflowasneeded.

5. TosavechangesmadeontheMode&FlowAdjustscreen:

A. PressandholdtheReturn/HighlightButtonuntila

differentscreenappears.

*NOTE:Ifnobuttonsarepressedforapproximately10seconds,the

screenwillrevertbacktotheNormalOperating/Standbyscreen,

undoinganyun‐savedchanges.

*NOTE:TheSOLO

concentratorwilldefaulttothelastflowrate

savedforeachmodesetting.

*NOTE:TheLCDAdjustscreenfollowsthesameprinciples

describedabove.

Invacare Corporation

www.invacare.com

USA

One Invacare Way

Elyria, Ohio USA

44036-2125

800-333-6900

Technical Services

800-832-4707

identified by ™ and ®. All trademarks are

owned by or licensed to Invacare

Corporation or its subsidiaries unless

otherwise noted.

Part No 1163220 Rev A - 8/09

Invacare Solo 2 Quick Reference Manual

Invacare Solo 2 Quick Reference Manual

Invacare Solo 2 Quick Reference Manual

Related papers

Other documents