Shadow SH713 Tripleducer Owner's manual

3 Transducers with 1/4” (6.3 mm) output socket and mounting adhesive

1. Locate the best position on the instrument for optimum sound quality and output.

2. Apply an even amount of included adhesive to the bottom of the pickup.

3. Press pickup firmly onto the instrument.

4. Make appropriate electrical connections.

Fax: (561) 743 0460

Shadow Elektroakustik

Peter-Haendel Straße 2

91334 Hemhofen · Germany

Shadow Electronics of America Inc.

17791 Alexander Run

Jupiter, FL 33478 U.S.A.

Fax: +49 - 91 95 - 92 99 30

Content:Content:

Installation Instruction for Shadow SH 713

Tripleducer

Note:

Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we

recommend an amplifier with low impedance input.