Guitarstrings
Pickup
Saddle
Guitarbridge
Torque
Direction of
Power Vector
Saddle Axis
15 Degrees
Push
Installation Instruction for Shadow SH 1900
Fig. 1 Fig. 2
Content:
1. Loosen strings and remove original bridge saddle.
2. Compare pickup height to original saddle height and shim if need.
3. Slide the pickup into the bridge slot from the treble and centered it under the strings.
4. Retune the guitar. Make sure the strings do not pull the pickup forward in the slot (see fig. 1)!
In this case push the saddle in a versical position again (see fig. 2).
5. Position the cable holder upright under the pickup on the guitar (see fig. 3).
6. Connect the pickup to an appropriate amplifier with the included instrument cable.
Fig. 3
Fax: (561) 743 0460
eMail: [email protected]
Shadow Elektroakustik
Peter-Haendel Straße 2
91334 Hemhofen · Germany
Shadow Electronics of America Inc.
17791 Alexander Run
Jupiter, FL 33478 U.S.A.
Fax: +49 - 91 95 - 92 99 30
eMail: [email protected]
Piezo-pickup with incorporated saddle (standard bridge slot width of 2.3 mm (3/32)) and volume control,
Instrument cable (12 feet),
Cable holder
/
