Extron Retractor Series Owner's manual

Extron
Brand
Extron
Model
Retractor Series
Type
Owner's manual

This manual is also suitable for

Retractor Filler Module • Installation Guide
The Retractor Filler Module is required to occupy unused space in Retractor installations.
The kit includes the ller module, a cable pass‑through plate, hole plugs (for unused
pass‑through holes), a blank cover plate, and hardware for mounting the plates.
Filler Module Assembly
A blank cover plate or cable pass‑through plate must be fastened to the Filler Module prior to
installation in the enclosure.
Hole Plug
(2 sizes)
If necessary, insert the
cable into the cable
pass-through plate.
1
If the cable pass-through
plate is used, snap an
included hole plug into
unused pass-thr
ough holes.
Secure the cable pass-through
plate or blank cover plate onto
the Filler Module using the provided
screws (2 places).
2
3
Scr
ews
(2 places)
Filler Module
(shown with cable
pass-through plate.)
Filler Module Included Parts
Hole Plug
sC
able Pass-through Plate
Blank Cover Plate
1/4" 3/8"
#4-40 Cover
Plate Screws (x2) Filler Module
68‑2830‑01
Rev. A
05 15
Extron USA Headquarters
+800.633.9876 (Inside USA/Canada Only)
Extron USA ‑ West Extron USA ‑ East
+1.714.491.1500 +1.919.850.1000
+1.714.491.1517 FAX +1.919.850.1001 FAX
Extron Europe
+800.3987.6673 (Inside Europe Only)
+31.33.453.4040
+31.33.453.4050 FAX
Extron India
1800.3070.3777 (Inside India Only)
+91.80.3055.3777
+91.80.3055.3737 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Asia
+65.6383.4400
+65.6383.4664 FAX
Extron Middle East
+971.4.299.1800
+971.4.299.1880 FAX
Extron Korea
+82.2.3444.1571
+82.2.3444.1575 FAX
© 2015 Extron Electronics All rights reserved. www.extron.com
Filler Module Installation
Pin
Locking
Screws
1
Cable Cubby
Tighten the locking screws
to prevent movement.
Slide the Filler Module
and Retractor into
the enclosure as shown.
2
3
Secur
e the Filler Module
and Retractor with the
mounting pin and clip.
C
a
b
Filler Module
(shown with blank
cover plate)
NOTES:
• Do not overtighten the locking screws. They only need to be snug.
• For cable pass‑through installation, allow enough cable below the enclosure to
provide adequate extension for your application.
  • Page 1 1
  • Page 2 2

Extron Retractor Series Owner's manual

Extron
Brand
Extron
Model
Retractor Series
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents