2. FSR
  3. PWB-323XL-ESK

FSR PWB-323XL-ESK, PWB-323XL-TrK Installation guide

  • I have reviewed the provided installation instructions for the FSR PWB-320XL-TR, PWB-320XL-CV, PWB-323XL-TR, and PWB-323XL-CV Trim Ring & Cover. The document details how to install the trim ring using screws and attach the cover with snap-top fasteners. I'm ready to answer any questions you have about these instructions and the installation process.
  • How many screws are needed for the initial installation?
    How do you secure the trim ring to the box?
    How is the cover attached to the trim ring?
FSR
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43340 LIT1718
PWB-320XL-TR / PWB-320XL-CV / PWB-323XL-TR / PWB-323XL-CV Trim Ring & Cover Installation Instructions
INSTALL (6) #6-32 SCREWS AS SHOWN. LEAVE 1/8" GAP
BETWEEN BOX AND SCREW HEAD.
1.
2. INSTALL TRIM RING AND SECURE TO BOX BY
TIGHTENING SCREWS.
TOP
BOTTOM
TOP
BOTTOM
PWB-320XL /
PWB-323XL
INSTALLED
IN WALL
TRIM RING TRIM RING
PWB-320XL /
PWB-323XL
INSTALLED
IN WALL
OR
OR
(6) #6-32 x 1/4" LG
PAN HEAD SCREW
(SUPPLIED) (6) #6-32 x 1/4" LG
PAN HEAD SCREW
(SUPPLIED)
3. PLACE COVER ONTO TRIM RING. PRESS IN ON THE
SNAP-TOP FASTENERS TO AFIX COVER.
COVER
COVER
OR
/