2. Computers & electronics
  3. Computer cables
  4. VGA cables
  5. FSR
  6. HV-MFSS71-T6BTN-OP2T3

FSR HV-MFSS71-T6BTN-OP2T3 User manual

  • Hello! I've reviewed the installation instructions for the FSR HV-T3 and HV-T6 VGA to HDMI cable kits. This document provides a detailed guide on how to replace the existing cable assemblies with new components, including an HD15 cable and a 3.5mm stereo cable. I'm ready to answer your questions about the installation process or the components involved.
  • What is the first step in the installation process?
    What components are removed in step 2?
    What kind of cables are used in reassembly?
    What size screws are used for reassembly?
FSR 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43046 LIT1473
HV-T3 VGA TO HDMI CABLE KIT INSTALLATION INSTRUCTIONS
1. REMOVE CABLE-PULL ASSEMBLY SCREWS AND RETAIN
SCREWS FOR REASSEMBLY.
CABLE TRAP
SUPPORT BRACKET
2. DISASSEMBLE CABLE-PULL ASSEMBLY. REMOVE AND
DISCARD HDMI CABLE, HOLE PLUG AND SCREWS.
HOLE PLUG
HDMI CABLE
SCREWS
3. REASSEMBLE CABLE-PULL ASSEMBLY WITH SUPPLIED
HD15 CABLE, 3.5mm STEREO CABLE, VGA/AUDIO CABLE
TRAP, SPACERS AND #6-32 x 3/8 LONG FLAT HEAD
SCREWS.
(2) #6-32 x 3/8 LONG
FLAT HEAD SCREW
HD15 CABLE
3.5 mm STERO CABLE
(2) SPACER
VIDEO/AUDIO
CABLE TRAP
CABLE TRAP
SUPPORT BRACKET
4. REINSTALL CABLE-PULL ASSEMBLY AT INDICATED HOLES.
REMOVE CABLE-PULL
ASSEMBLY THRU
BOTTOM OF HV-T3
ASSEMBLY
REINSTALL CABLE-PULL
ASSEMBLY THRU
BOTTOM OF HV-T3
ASSEMBLY
FSR 244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43046 LIT1473
HV-T6 VGA TO HDMI CABLE KIT INSTALLATION INSTRUCTIONS
1. REMOVE CABLE-PULL ASSEMBLY SCREWS AND RETAIN
SCREWS FOR REASSEMBLY. 2. DETERMINE WHICH HDMI CABLE WILL BE REMOVED AND
WHICH AUDIO HOLE WILL BE USED, AND DISASSEMBLE
CABLE-PULL ASSEMBLY. RETAIN CABLE BUSHING AND
DISCARD HOLE PLUG. ONE OR BOTH CABLE-PULL
PANELS MAY NEED TO BE REMOVED.
REMOVE CABLE-PULL
ASSEMBLY THRU
BOTTOM OF HV-T6
ASSEMBLY
CABLE-PULL
PANEL MOUNT
(2) CABLE-PULL
PANEL
(2) HOLE PLUG
(4) HDMI CABLE
(6) SCREW
3. REASSEMBLE CABLE-PULL ASSEMBLY WITH SUPPLIED
HD15 CABLE, 3.5mm STEREO CABLE AND BUSHING.
3.5mm STEREO CABLE
HD15 CABLE
BUSHING
CABLE-PULL
PANEL MOUNT
(2) CABLE-PULL
PANEL
(6) SCREW
REINSTALL CABLE-
PULL ASSEMBLY THRU
BOTTOM OF HV-T6
ASSEMBLY
4. REINSTALL CABLE-PULL ASSEMBLY AT INDICATED HOLES.
/