Dale Tiffany TT101081J Operating instructions

Base

Threaded Rod

Knurl Nut

Tiffany Shade

Finial

Cord

Bulb

Socket assembly

ASSEMBLY INSTRUCTIONS:

Model # TT101081J

No Tools Required

Estimated Assembly Time 5-10 Minutes

1) Place the lamp on a level surface.

2) Screw Threaded Rod into the Socket assembly.

3) Screw Knurl Nut on Threaded Rod. This can be used to

raise the Shade a little if necessary.

4) Place the Shade over the end of the Threaded Rod and

screw the Finial securing the shade in place.

5) Insert bulb into the bulb socket.

Recommended (2) 60Watt Type “A” bulbs or (2) 13-watt CFL Bulbs.

(Bulbs not included)

Cleaning of Your Lamp.

Unplug lamp, wipe with damp cloth cleaner.

Do not use Abrasives.

*Save these instructions for future reference.

*Made in China Revision – 03/05/13

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Page is loading ...